[PATCH v2 09/42] linux/mei: Header for mei_hdcp driver interface

[Winkler, Tomas]

> Data structures and Enum for the I915-MEI_HDCP interface are defined at
> <linux/mei_hdcp.h>
> 
> v2:
>   Rebased.
> 
> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> ---
>  include/linux/mei_hdcp.h | 71
> ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> diff --git a/include/linux/mei_hdcp.h b/include/linux/mei_hdcp.h index
> 774b26da0c26..9a869d1cbd5d 100644
> --- a/include/linux/mei_hdcp.h
> +++ b/include/linux/mei_hdcp.h
> @@ -23,6 +23,77 @@
>  #ifndef _LINUX_MEI_HDCP_H
>  #define _LINUX_MEI_HDCP_H
Missing license. 
> 
> +#include <linux/mei_cl_bus.h>
> +
> +/*
> + * Enumeration of the physical DDI available on the platform  */ enum
> +physical_port {

If this is public header you need a proper prefix for types. 

> +	INVALID_PORT = 0x00,	/* Not a valid port */
> +
> +	DDI_RANGE_BEGIN = 0x01,	/* Beginning of the valid DDI port
> range */
> +	DDI_B		= 0x01,		/* Port DDI B */
> +	DDI_C		= 0x02,		/* Port DDI C */
> +	DDI_D		= 0x03,		/* Port DDI D */
> +	DDI_E		= 0x04,		/* Port DDI E */
> +	DDI_F		= 0x05,		/* Port DDI F */
> +	DDI_A		= 0x07,		/* Port DDI A */
> +	DDI_RANGE_END	= DDI_A,/* End of the valid DDI port range */
> +};
> +
> +/* The types of HDCP 2.2 ports supported */ enum
> +hdcp_integrated_port_type {
> +	HDCP_INVALID_TYPE	= 0x00,
> +
> +	/* HDCP 2.x ports that are integrated into Intel HW */
> +	INTEGRATED		= 0x01,
> +
> +	/* HDCP2.2 discrete wired Tx port with LSPCON (HDMI 2.0) solution
> */
> +	LSPCON			= 0x02,
> +
> +	/* HDCP2.2 discrete wired Tx port using the CPDP (DP 1.3) solution */
> +	CPDP			= 0x03,
> +};
> +
> +/**
> + * wired_protocol: Supported integrated wired HDCP protocol.
> + * Based on this value, Minor differenceneeded between wired
> +specifications
> + * are handled.
> + */
> +enum hdcp_protocol {
> +	HDCP_PROTOCOL_INVALID,
> +	HDCP_PROTOCOL_HDMI,
> +	HDCP_PROTOCOL_DP
> +};
> +
> +/**
> + * mei_hdcp_data: Input data to the mei_hdcp APIs.
> + */
> +struct mei_hdcp_data {
> +	struct mei_cl_device *cldev;


Not why this device is here?

 +	enum physical_port port;
> +	enum hdcp_integrated_port_type port_type;
> +	enum hdcp_protocol protocol;
> +
> +	/*
> +	 * No of streams transmitted on a port.
> +	 * In case of HDMI & DP SST, single stream will be
> +	 * transmitted on a port.
> +	 */
> +	uint16_t k;
> +
> +	/*
> +	 * Count of RepeaterAuth_Stream_Manage msg propagated.
> +	 * Initialized to 0 on AKE_INIT. Incremented after every successful
> +	 * transmission of RepeaterAuth_Stream_Manage message. When it
> rolls
> +	 * over re-Auth has to be triggered.
> +	 */
> +	uint32_t seq_num_m;
> +
> +	/* k(No of Streams per port) x structure of wired_streamid_type */
> +	struct hdcp2_streamid_type *streams;
> +};
> +
>  #ifdef CONFIG_INTEL_MEI_HDCP
>  int mei_hdcp_cldev_get_reference(void *client_data,
>  				 struct mei_cl_device **cldev,
> --
> 2.7.4