[PATCH v2 01/10] video: stm32: stm32_ltdc: add bridge to display controller

Patrice CHOTARD patrice.chotard at st.com
Tue Mar 13 08:44:48 UTC 2018


Hi Yannick

On 03/02/2018 04:44 PM, yannick fertre wrote:
> Manage a bridge insert between the display controller & a panel.
> 
> Signed-off-by: yannick fertre <yannick.fertre at st.com>
> ---
>   drivers/video/stm32/stm32_ltdc.c | 107 ++++++++++++++++++++++++++-------------
>   1 file changed, 71 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
> index e160c77..bd9c0de 100644
> --- a/drivers/video/stm32/stm32_ltdc.c
> +++ b/drivers/video/stm32/stm32_ltdc.c
> @@ -8,6 +8,7 @@
>   
>   #include <common.h>
>   #include <clk.h>
> +#include <display.h>
>   #include <dm.h>
>   #include <panel.h>
>   #include <reset.h>
> @@ -15,12 +16,12 @@
>   #include <asm/io.h>
>   #include <asm/arch/gpio.h>
>   #include <dm/device-internal.h>
> +#include <video_bridge.h>
>   
>   DECLARE_GLOBAL_DATA_PTR;
>   
>   struct stm32_ltdc_priv {
>   	void __iomem *regs;
> -	struct display_timing timing;
>   	enum video_log2_bpp l2bpp;
>   	u32 bg_col_argb;
>   	u32 crop_x, crop_y, crop_w, crop_h;
> @@ -210,23 +211,23 @@ static void stm32_ltdc_enable(struct stm32_ltdc_priv *priv)
>   	setbits_le32(priv->regs + LTDC_GCR, GCR_LTDCEN);
>   }
>   
> -static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
> +static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,
> +				struct display_timing *timings)
>   {
>   	void __iomem *regs = priv->regs;
> -	struct display_timing *timing = &priv->timing;
>   	u32 hsync, vsync, acc_hbp, acc_vbp, acc_act_w, acc_act_h;
>   	u32 total_w, total_h;
>   	u32 val;
>   
>   	/* Convert video timings to ltdc timings */
> -	hsync = timing->hsync_len.typ - 1;
> -	vsync = timing->vsync_len.typ - 1;
> -	acc_hbp = hsync + timing->hback_porch.typ;
> -	acc_vbp = vsync + timing->vback_porch.typ;
> -	acc_act_w = acc_hbp + timing->hactive.typ;
> -	acc_act_h = acc_vbp + timing->vactive.typ;
> -	total_w = acc_act_w + timing->hfront_porch.typ;
> -	total_h = acc_act_h + timing->vfront_porch.typ;
> +	hsync = timings->hsync_len.typ - 1;
> +	vsync = timings->vsync_len.typ - 1;
> +	acc_hbp = hsync + timings->hback_porch.typ;
> +	acc_vbp = vsync + timings->vback_porch.typ;
> +	acc_act_w = acc_hbp + timings->hactive.typ;
> +	acc_act_h = acc_vbp + timings->vactive.typ;
> +	total_w = acc_act_w + timings->hfront_porch.typ;
> +	total_h = acc_act_h + timings->vfront_porch.typ;
>   
>   	/* Synchronization sizes */
>   	val = (hsync << 16) | vsync;
> @@ -248,14 +249,14 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
>   
>   	/* Signal polarities */
>   	val = 0;
> -	debug("%s: timing->flags 0x%08x\n", __func__, timing->flags);
> -	if (timing->flags & DISPLAY_FLAGS_HSYNC_HIGH)
> +	debug("%s: timing->flags 0x%08x\n", __func__, timings->flags);
> +	if (timings->flags & DISPLAY_FLAGS_HSYNC_HIGH)
>   		val |= GCR_HSPOL;
> -	if (timing->flags & DISPLAY_FLAGS_VSYNC_HIGH)
> +	if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH)
>   		val |= GCR_VSPOL;
> -	if (timing->flags & DISPLAY_FLAGS_DE_HIGH)
> +	if (timings->flags & DISPLAY_FLAGS_DE_HIGH)
>   		val |= GCR_DEPOL;
> -	if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> +	if (timings->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
>   		val |= GCR_PCPOL;
>   	clrsetbits_le32(regs + LTDC_GCR,
>   			GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
> @@ -331,7 +332,11 @@ static int stm32_ltdc_probe(struct udevice *dev)
>   	struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
>   	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
>   	struct stm32_ltdc_priv *priv = dev_get_priv(dev);
> -	struct udevice *panel;
> +#ifdef CONFIG_VIDEO_BRIDGE
> +	struct udevice *bridge = NULL;
> +#endif
> +	struct udevice *panel = NULL;
> +	struct display_timing timings;
>   	struct clk pclk;
>   	struct reset_ctl rst;
>   	int rate, ret;
> @@ -364,63 +369,93 @@ static int stm32_ltdc_probe(struct udevice *dev)
>   	/* Reset */
>   	reset_deassert(&rst);
>   
> -	ret = uclass_first_device(UCLASS_PANEL, &panel);
> +#ifdef CONFIG_VIDEO_BRIDGE
> +	ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge);
>   	if (ret) {
> -		debug("%s: panel device error %d\n", __func__, ret);
> -		return ret;
> +		debug("%s: No video bridge, or no backlight on bridge\n",
> +		      __func__);
>   	}
>   
> -	ret = panel_enable_backlight(panel);
> +	if (bridge) {
> +		ret = video_bridge_attach(bridge);
> +		if (ret) {
> +			debug("%s: fail to attach bridge\n", __func__);

I would replace debug by dev_err() here.

> +			return ret;
> +		}
> +	}
> +#endif
> +	ret = uclass_first_device(UCLASS_PANEL, &panel);
>   	if (ret) {
> -		debug("%s: panel %s enable backlight error %d\n",
> -		      __func__, panel->name, ret);
> +		debug("%s: panel device error %d\n", __func__, ret);

Ditto

>   		return ret;
>   	}
>   
> -	ret = fdtdec_decode_display_timing(gd->fdt_blob,
> -					   dev_of_offset(dev), 0,
> -					   &priv->timing);
> +	ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(panel),
> +					   0, &timings);
>   	if (ret) {
>   		debug("%s: decode display timing error %d\n",
>   		      __func__, ret);
> -		return -EINVAL;

Ditto

> +		return ret;
>   	}
>   
> -	rate = clk_set_rate(&pclk, priv->timing.pixelclock.typ);
> +	rate = clk_set_rate(&pclk, timings.pixelclock.typ);
>   	if (rate < 0) {
>   		debug("%s: fail to set pixel clock %d hz %d hz\n",
> -		      __func__, priv->timing.pixelclock.typ, rate);
> +		      __func__, timings.pixelclock.typ, rate);

Ditto

>   		return rate;
>   	}
>   
>   	debug("%s: Set pixel clock req %d hz get %d hz\n", __func__,
> -	      priv->timing.pixelclock.typ, rate);
> +	      timings.pixelclock.typ, rate);
>   
>   	/* TODO Below parameters are hard-coded for the moment... */
>   	priv->l2bpp = VIDEO_BPP16;
>   	priv->bg_col_argb = 0xFFFFFFFF; /* white no transparency */
>   	priv->crop_x = 0;
>   	priv->crop_y = 0;
> -	priv->crop_w = priv->timing.hactive.typ;
> -	priv->crop_h = priv->timing.vactive.typ;
> +	priv->crop_w = timings.hactive.typ;
> +	priv->crop_h = timings.vactive.typ;
>   	priv->alpha = 0xFF;
>   
>   	debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
> -	      priv->timing.hactive.typ, priv->timing.vactive.typ,
> +	      timings.hactive.typ, timings.vactive.typ,
>   	      VNBITS(priv->l2bpp), uc_plat->base);
>   	debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
>   	      priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
>   	      priv->bg_col_argb, priv->alpha);
>   
>   	/* Configure & start LTDC */
> -	stm32_ltdc_set_mode(priv);
> +	stm32_ltdc_set_mode(priv, &timings);
>   	stm32_ltdc_set_layer1(priv, uc_plat->base);
>   	stm32_ltdc_enable(priv);
>   
> -	uc_priv->xsize = priv->timing.hactive.typ;
> -	uc_priv->ysize = priv->timing.vactive.typ;
> +	uc_priv->xsize = timings.hactive.typ;
> +	uc_priv->ysize = timings.vactive.typ;
>   	uc_priv->bpix = priv->l2bpp;
>   
> +#ifdef CONFIG_VIDEO_BRIDGE
> +	if (bridge) {
> +		ret = video_bridge_set_backlight(bridge, 80);
> +		if (ret) {
> +			debug("%s: fail to set backlight\n", __func__);

Ditto

> +			return ret;
> +		}
> +	} else {
> +		ret = panel_enable_backlight(panel);
> +		if (ret) {
> +			debug("%s: panel %s enable backlight error %d\n",
> +			      __func__, panel->name, ret);

Ditto

> +			return ret;
> +		}
> +	}
> +#else
> +	ret = panel_enable_backlight(panel);
> +	if (ret) {
> +		debug("%s: panel %s enable backlight error %d\n",
> +		      __func__, panel->name, ret);

Ditto

> +		return ret;
> +	}
> +#endif
>   	video_set_flush_dcache(dev, true);
>   
>   	return 0;
> 


More information about the dri-devel mailing list