[PATCH v3 2/3] drm: bridge: Add thc63lvd1024 LVDS decoder driver

[Andrzej Hajda]

On 13.03.2018 15:30, Jacopo Mondi wrote:
> Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
> output decoder.

IMO converter suits here better, but it is just suggestion.

>
> Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> ---
>  drivers/gpu/drm/bridge/Kconfig        |   7 +
>  drivers/gpu/drm/bridge/Makefile       |   1 +
>  drivers/gpu/drm/bridge/thc63lvd1024.c | 241 ++++++++++++++++++++++++++++++++++
>  3 files changed, 249 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 3b99d5a..facf6bd 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -92,6 +92,13 @@ config DRM_SII9234
>  	  It is an I2C driver, that detects connection of MHL bridge
>  	  and starts encapsulation of HDMI signal.
>  
> +config DRM_THINE_THC63LVD1024
> +	tristate "Thine THC63LVD1024 LVDS decoder bridge"
> +	depends on OF
> +	select DRM_PANEL_BRIDGE

You don't use PANEL_BRIDGE, it should be possible to drop the select.

> +	---help---
> +	  Thine THC63LVD1024 LVDS decoder bridge driver.

Decoder to what?
Maybe it would be better to say it is LVDS/parallel or LVDS/RGB
converter or bridge.

> +
>  config DRM_TOSHIBA_TC358767
>  	tristate "Toshiba TC358767 eDP bridge"
>  	depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 373eb28..fd90b16 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
>  obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
>  obj-$(CONFIG_DRM_SII902X) += sii902x.o
>  obj-$(CONFIG_DRM_SII9234) += sii9234.o
> +obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
>  obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
>  obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
>  obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
> new file mode 100644
> index 0000000..4b059c0
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
> @@ -0,0 +1,241 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * THC63LVD1024 LVDS to parallel data DRM bridge driver.
> + *
> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas at jmondi.org>
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +static const char * const thc63_reg_names[] = {
> +	"vcc", "lvcc", "pvcc", "cvcc", };
> +
> +struct thc63_dev {
> +	struct device *dev;
> +
> +	struct regulator *vccs[ARRAY_SIZE(thc63_reg_names)];
> +
> +	struct gpio_desc *pwdn;
> +	struct gpio_desc *oe;
> +
> +	struct drm_bridge bridge;
> +	struct drm_bridge *next;
> +};
> +
> +static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct thc63_dev, bridge);
> +}
> +
> +static int thc63_attach(struct drm_bridge *bridge)
> +{
> +	struct thc63_dev *thc63 = to_thc63(bridge);
> +
> +	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
> +}
> +
> +static void thc63_enable(struct drm_bridge *bridge)
> +{
> +	struct thc63_dev *thc63 = to_thc63(bridge);
> +	struct regulator *vcc;
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < ARRAY_SIZE(thc63->vccs); i++) {
> +		vcc = thc63->vccs[i];
> +		if (vcc) {
> +			ret = regulator_enable(vcc);
> +			if (ret)
> +				goto error_vcc_enable;
> +		}
> +	}
> +
> +	if (thc63->pwdn)
> +		gpiod_set_value(thc63->pwdn, 0);
> +
> +	if (thc63->oe)
> +		gpiod_set_value(thc63->oe, 1);
> +
> +	return;
> +
> +error_vcc_enable:
> +	dev_err(thc63->dev, "Failed to enable regulator %u\n", i);
> +}
> +
> +static void thc63_disable(struct drm_bridge *bridge)
> +{
> +	struct thc63_dev *thc63 = to_thc63(bridge);
> +	struct regulator *vcc;
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < ARRAY_SIZE(thc63->vccs); i++) {
> +		vcc = thc63->vccs[i];
> +		if (vcc) {
> +			ret = regulator_disable(vcc);
> +			if (ret)
> +				goto error_vcc_disable;

I think in disable path you can report an error and continue - should be
safer.

> +		}
> +	}
> +
> +	if (thc63->pwdn)
> +		gpiod_set_value(thc63->pwdn, 1);
> +
> +	if (thc63->oe)
> +		gpiod_set_value(thc63->oe, 0);

Usually disable uses reverse order. Ie first disable oe, then, pwdn,
then regulators, also in reverse order.
Looks more reasonable.

> +
> +	return;
> +
> +error_vcc_disable:
> +	dev_err(thc63->dev, "Failed to disable regulator %u\n", i);
> +}
> +
> +struct drm_bridge_funcs thc63_bridge_func = {
> +	.attach	= thc63_attach,
> +	.enable = thc63_enable,
> +	.disable = thc63_disable,
> +};
> +
> +static int thc63_parse_dt(struct thc63_dev *thc63)
> +{
> +	struct device_node *thc63_out;
> +	struct device_node *remote;
> +	int ret = 0;
> +
> +	thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node, 2, -1);

Please define and use enums for port number, it will be more clear.

> +	if (!thc63_out) {
> +		dev_err(thc63->dev, "Missing endpoint in Port at 2\n");
> +		return -ENODEV;
> +	}
> +
> +	remote = of_graph_get_remote_port_parent(thc63_out);
> +	if (!remote) {
> +		dev_err(thc63->dev, "Endpoint in Port at 2 unconnected\n");
> +		ret = -ENODEV;
> +		goto error_put_out_node;
> +	}
> +
> +	if (!of_device_is_available(remote)) {
> +		dev_err(thc63->dev, "Port at 2 remote endpoint is disabled\n");
> +		ret = -ENODEV;
> +		goto error_put_remote_node;
> +	}
> +
> +	thc63->next = of_drm_find_bridge(remote);
> +	if (!thc63->next)
> +		ret = -EPROBE_DEFER;
> +
> +error_put_remote_node:
> +	of_node_put(remote);
> +error_put_out_node:
> +	of_node_put(thc63_out);
> +
> +	return ret;
> +}
> +
> +static int thc63_gpio_init(struct thc63_dev *thc63)
> +{
> +	thc63->pwdn = devm_gpiod_get_optional(thc63->dev, "pwdn",
> +					      GPIOD_OUT_LOW);
Shouldn't be GPIOD_OUT_HIGH - bridge initially disabled?

Regards
Andrzej
> +	if (IS_ERR(thc63->pwdn)) {
> +		dev_err(thc63->dev, "Unable to get GPIO \"pwdn\"\n");
> +		return PTR_ERR(thc63->pwdn);
> +	}
> +
> +	thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW);
> +	if (IS_ERR(thc63->oe)) {
> +		dev_err(thc63->dev, "Unable to get GPIO \"oe\"\n");
> +		return PTR_ERR(thc63->oe);
> +	}
> +
> +	return 0;
> +}
> +
> +static int thc63_regulator_init(struct thc63_dev *thc63)
> +{
> +	struct regulator **reg;
> +	int i;
> +
> +	reg = &thc63->vccs[0];
> +	for (i = 0; i < ARRAY_SIZE(thc63->vccs); i++, reg++) {
> +		*reg = devm_regulator_get_optional(thc63->dev,
> +						   thc63_reg_names[i]);
> +		if (IS_ERR(*reg)) {
> +			if (PTR_ERR(*reg) == -EPROBE_DEFER)
> +				return -EPROBE_DEFER;
> +			*reg = NULL;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int thc63_probe(struct platform_device *pdev)
> +{
> +	struct thc63_dev *thc63;
> +	int ret;
> +
> +	thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
> +	if (!thc63)
> +		return -ENOMEM;
> +
> +	thc63->dev = &pdev->dev;
> +	platform_set_drvdata(pdev, thc63);
> +
> +	ret = thc63_regulator_init(thc63);
> +	if (ret)
> +		return ret;
> +
> +	ret = thc63_gpio_init(thc63);
> +	if (ret)
> +		return ret;
> +
> +	ret = thc63_parse_dt(thc63);
> +	if (ret)
> +		return ret;
> +
> +	thc63->bridge.driver_private = thc63;
> +	thc63->bridge.of_node = pdev->dev.of_node;
> +	thc63->bridge.funcs = &thc63_bridge_func;
> +
> +	drm_bridge_add(&thc63->bridge);
> +
> +	return 0;
> +}
> +
> +static int thc63_remove(struct platform_device *pdev)
> +{
> +	struct thc63_dev *thc63 = platform_get_drvdata(pdev);
> +
> +	drm_bridge_remove(&thc63->bridge);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id thc63_match[] = {
> +	{ .compatible = "thine,thc63lvd1024", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, thc63_match);
> +#endif
> +
> +static struct platform_driver thc63_driver = {
> +	.probe	= thc63_probe,
> +	.remove	= thc63_remove,
> +	.driver	= {
> +		.name		= "thc63lvd1024",
> +		.of_match_table	= thc63_match,
> +	},
> +};
> +module_platform_driver(thc63_driver);
> +
> +MODULE_AUTHOR("Jacopo Mondi <jacopo at jmondi.org>");
> +MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
> +MODULE_LICENSE("GPL v2");