[PATCH v5 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle

Niklas Söderlund niklas.soderlund at ragnatech.se
Fri Mar 16 00:00:04 UTC 2018


Hi Jacopo,

Thanks for your patch.

This one must depend on '[PATCH v2 0/5] arm64: dts: renesas: r8a77970: 
enable HDMI output' or something similar not yet in renesas-drivers 
repository correct?

In the next version would you care to include the LVDS commit from the 
dependency  series and squash this change into that one or in some other 
good manger stack to two? Laurent told me he did not like 5/5 in that 
patch-set as it did not yet have the LVDS decoder node due to no driver 
existed at that time when I posted that even if it's not strictly needed 
to get the display working :-)

I also think you should split this last patch out to a separate series 
as it should go in Simon's tree while the driver and documentation is 
going in earlier in a different tree right?

On a side note, do you plan to update the Gen2 boards DTS files which 
also have a decoder which are not yet described in DT?

On 2018-03-15 17:11:56 +0100, Jacopo Mondi wrote:
> The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS
> decoder, connected to the on-chip LVDS encoder output on one side
> and to HDMI encoder ADV7511w on the other one.
> 
> As the decoder does not need any configuration it has been so-far
> omitted from DTS. Now that a driver is available, describe it in DT
> as well.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 33 +++++++++++++++++++++++---
>  1 file changed, 30 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> index c0fd144..69f43b8 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -42,6 +42,33 @@
>  			};
>  		};
>  	};
> +
> +	thc63lvd1024: lvds-decoder {
> +		compatible = "thine,thc63lvd1024";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +
> +				thc63lvd1024_in_0: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +
> +			port at 2{
> +				reg = <2>;
> +
> +				thc63lvd1024_out_2: endpoint {
> +					remote-endpoint = <&adv7511_in>;
> +				};
> +
> +			};
> +
> +		};
> +	};
>  };
>  
>  &avb {
> @@ -98,7 +125,7 @@
>  			port at 0 {
>  				reg = <0>;
>  				adv7511_in: endpoint {
> -					remote-endpoint = <&lvds0_out>;
> +					remote-endpoint = <&thc63lvd1024_out_2>;
>  				};
>  			};
>  
> @@ -152,8 +179,8 @@
>  
>  	ports {
>  		port at 1 {
> -			endpoint {
> -				remote-endpoint = <&adv7511_in>;
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&thc63lvd1024_in_0>;
>  			};
>  		};
>  	};
> -- 
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund


More information about the dri-devel mailing list