[PATCH v6 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle

[Laurent Pinchart]

Hi Jacopo,

Thank you for the patch.

On Friday, 16 March 2018 17:16:39 EET Jacopo Mondi wrote:
> The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS
> decoder, connected to the on-chip LVDS encoder output on one side
> and to HDMI encoder ADV7511w on the other one.
> 
> As the decoder does not need any configuration it has been so-far
> omitted from DTS. Now that a driver is available, describe it in DT
> as well.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>

The patch looks OK to me, but I think it should be squashed with Niklas' patch 
that added display HDMI output support to the V3M Eagle DT.

> ---
> 
> List of patch dependencies, as of renesas-drivers-2018-03-13-v4.16-rc5:
> 
> - [PATCH v2 0/5] arm64: dts: renesas: r8a77970: enable HDMI output
>    which includes DU, LVDS and FCPD enablement from:
>   [PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support
> - [PATCH v4] v4l: vsp1: Fix video output on R8A77970
> 
> Patches to be applied on top of
> "arm64: dts: renesas: eagle: add HDMI output using the ADV7511W"
> 
> Thanks
>    j
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 33 ++++++++++++++++++++---
>  1 file changed, 30 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index c0fd144..69f43b8
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -42,6 +42,33 @@
>  			};
>  		};
>  	};
> +
> +	thc63lvd1024: lvds-decoder {
> +		compatible = "thine,thc63lvd1024";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +
> +				thc63lvd1024_in_0: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +
> +			port at 2{
> +				reg = <2>;
> +
> +				thc63lvd1024_out_2: endpoint {
> +					remote-endpoint = <&adv7511_in>;
> +				};
> +
> +			};
> +
> +		};
> +	};
>  };
> 
>  &avb {
> @@ -98,7 +125,7 @@
>  			port at 0 {
>  				reg = <0>;
>  				adv7511_in: endpoint {
> -					remote-endpoint = <&lvds0_out>;
> +					remote-endpoint = <&thc63lvd1024_out_2>;
>  				};
>  			};
> 
> @@ -152,8 +179,8 @@
> 
>  	ports {
>  		port at 1 {
> -			endpoint {
> -				remote-endpoint = <&adv7511_in>;
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&thc63lvd1024_in_0>;
>  			};
>  		};
>  	};

-- 
Regards,

Laurent Pinchart