[PATCH v5 1/6] drm: Add drm_mode_config->normalize_zpos boolean

[Peter Ujfalusi]

Instead of drivers duplicating the drm_atomic_helper_check() code to be
able to normalize the zpos they can use the normalize_zpos flag to let the
drm core to do it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 drivers/gpu/drm/drm_atomic_helper.c | 11 +++++++++++
 include/drm/drm_mode_config.h       |  8 ++++++++
 include/drm/drm_plane.h             |  4 ++--
 3 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 00c78c1c9681..a2d06ca1570c 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -875,6 +875,11 @@ EXPORT_SYMBOL(drm_atomic_helper_check_planes);
  * functions depend upon an updated adjusted_mode.clock to e.g. properly compute
  * watermarks.
  *
+ * Note that zpos normalization will add all enable planes to the state which
+ * might not desired for some drivers.
+ * For example enable/disable of a cursor plane which have fixed zpos value
+ * would trigger all other enabled planes to be forced to the state change.
+ *
  * RETURNS:
  * Zero for success or -errno
  */
@@ -887,6 +892,12 @@ int drm_atomic_helper_check(struct drm_device *dev,
 	if (ret)
 		return ret;
 
+	if (dev->mode_config.normalize_zpos) {
+		ret = drm_atomic_normalize_zpos(dev, state);
+		if (ret)
+			return ret;
+	}
+
 	ret = drm_atomic_helper_check_planes(dev, state);
 	if (ret)
 		return ret;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 7569f22ffef6..33b3a96d66d0 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -795,6 +795,14 @@ struct drm_mode_config {
 	 */
 	bool allow_fb_modifiers;
 
+	/**
+	 * @normalize_zpos:
+	 *
+	 * If true the drm core will call drm_atomic_normalize_zpos() as part of
+	 * atomic mode checking from drm_atomic_helper_check()
+	 */
+	bool normalize_zpos;
+
 	/**
 	 * @modifiers_property: Plane property to list support modifier/format
 	 * combination.
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index f7bf4a48b1c3..d6da26d66a4b 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -51,8 +51,8 @@ struct drm_modeset_acquire_ctx;
  *	plane with a lower ID.
  * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
  *	where N is the number of active planes for given crtc. Note that
- *	the driver must call drm_atomic_normalize_zpos() to update this before
- *	it can be trusted.
+ *	the driver must set drm_mode_config.normalize_zpos or call
+ *	drm_atomic_normalize_zpos() to update this before it can be trusted.
  * @src: clipped source coordinates of the plane (in 16.16)
  * @dst: clipped destination coordinates of the plane
  * @state: backpointer to global drm_atomic_state
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki