[RFC PATCH 2/3] drm: bridge: panel: allow override of the bus format

[Peter Rosin]

Hi Laurent,

Thanks for the feedback!

On 2018-03-20 14:56, Laurent Pinchart wrote:
> Hi Peter,
> 
> Thank you for the patch.
> 
> On Sunday, 18 March 2018 00:15:24 EET Peter Rosin wrote:
>> Useful if the bridge does some kind of conversion of the bus format.
>>
>> Signed-off-by: Peter Rosin <peda at axentia.se>
>> ---
>>  drivers/gpu/drm/bridge/panel.c | 22 +++++++++++++++++++++-
>>  include/drm/drm_bridge.h       |  1 +
>>  2 files changed, 22 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
>> index 6d99d4a3beb3..ccef0283ff41 100644
>> --- a/drivers/gpu/drm/bridge/panel.c
>> +++ b/drivers/gpu/drm/bridge/panel.c
>> @@ -22,6 +22,7 @@ struct panel_bridge {
>>  	struct drm_connector connector;
>>  	struct drm_panel *panel;
>>  	u32 connector_type;
>> +	u32 bus_format;
>>  };
>>
>>  static inline struct panel_bridge *
>> @@ -40,8 +41,15 @@ static int panel_bridge_connector_get_modes(struct
>> drm_connector *connector) {
>>  	struct panel_bridge *panel_bridge =
>>  		drm_connector_to_panel_bridge(connector);
>> +	int ret;
>> +
>> +	ret = drm_panel_get_modes(panel_bridge->panel);
>> +
>> +	if (panel_bridge->bus_format)
>> +		drm_display_info_set_bus_formats(&connector->display_info,
>> +						 &panel_bridge->bus_format, 1);
> 
> While I agree with the problem statement and, to some extent, the DT bindings, 
> I don't think this is the right implementation. You've correctly noted that 
> display controller shouldn't blindly use the formats reported by the panel 
> through the connector formats, and that hacking the panel driver to override 
> the formats isn't a good idea, so I wouldn't override the formats reported by 
> the connector. I would instead extend the drm_bridge API to report formats at 
> bridge inputs. This would be more generic and allow each bridge to configure 
> itself according to the next bridge in the chain.
> 
> I'm not sure whether this API extension should be in the form of a new bridge 
> function, or if the formats should be stored in the drm_bridge structure 
> directly as done for connectors in the display info structure. I'm tempted by 
> the former, but I'm open to discussions.

Ok, I can look into that, but let me check if I got this right. From the very
little of the code that I have looked at, I have gathered that display
controllers handle bridges explicitly, right? If so, by extending the bridge
(with either a new function or new data) you impose changes to all display
controllers wanting to handle this new bridge input-format. If so, I assume
I can leave out the changes to all display controllers that I do not care
about. Correct?

Also, don't hold your breath waiting for a v2, but I'll try to get to it :-)

>> -	return drm_panel_get_modes(panel_bridge->panel);
>> +	return ret;
>>  }
>>
>>  static const struct drm_connector_helper_funcs
>> @@ -203,6 +211,18 @@ void drm_panel_bridge_remove(struct drm_bridge *bridge)
>> }
>>  EXPORT_SYMBOL(drm_panel_bridge_remove);
>>
>> +void drm_panel_bridge_set_bus_format(struct drm_bridge *bridge, u32
>> bus_format) +{
>> +	struct panel_bridge *panel_bridge;
>> +
>> +	if (!bridge)
>> +		return;
>> +
>> +	panel_bridge = drm_bridge_to_panel_bridge(bridge);
>> +	panel_bridge->bus_format = bus_format;
>> +}
>> +EXPORT_SYMBOL(drm_panel_bridge_set_bus_format);
>> +
>>  static void devm_drm_panel_bridge_release(struct device *dev, void *res)
>>  {
>>  	struct drm_bridge **bridge = res;
>> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
>> index 682d01ba920c..81903b92f187 100644
>> --- a/include/drm/drm_bridge.h
>> +++ b/include/drm/drm_bridge.h
>> @@ -268,6 +268,7 @@ void drm_bridge_enable(struct drm_bridge *bridge);
>>  struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
>>  					u32 connector_type);
>>  void drm_panel_bridge_remove(struct drm_bridge *bridge);
>> +void drm_panel_bridge_set_bus_format(struct drm_bridge *bridge, u32
>> bus_format);
>> struct drm_bridge *devm_drm_panel_bridge_add(struct device
>> *dev,
>>  					     struct drm_panel *panel,
>>  					     u32 connector_type);
>