[PATCH 07/15] v4l: vsp1: Move DRM atomic commit pipeline setup to separate function
Kieran Bingham
kieran.bingham at ideasonboard.com
Wed Mar 28 14:43:13 UTC 2018
Hi Laurent,
On 26/02/18 21:45, Laurent Pinchart wrote:
> The DRM pipeline setup code used at atomic commit time is similar to the
> setup code used when enabling the pipeline. Move it to a separate
> function in order to share it.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Assuming no hidden secret code addition in this code move that I haven't seen..
Only a minor nit below asking if the function should be pluralised (_inputs,
rather than _input)
Reviewed-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> ---
> drivers/media/platform/vsp1/vsp1_drm.c | 347 +++++++++++++++++----------------
> 1 file changed, 180 insertions(+), 167 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index 9a043a915c0b..7bf697ba7969 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -46,6 +46,185 @@ static void vsp1_du_pipeline_frame_end(struct vsp1_pipeline *pipe,
> * Pipeline Configuration
> */
>
> +/* Setup one RPF and the connected BRU sink pad. */
> +static int vsp1_du_pipeline_setup_rpf(struct vsp1_device *vsp1,
> + struct vsp1_pipeline *pipe,
> + struct vsp1_rwpf *rpf,
> + unsigned int bru_input)
> +{
> + struct v4l2_subdev_selection sel;
> + struct v4l2_subdev_format format;
> + const struct v4l2_rect *crop;
> + int ret;
> +
> + /*
> + * Configure the format on the RPF sink pad and propagate it up to the
> + * BRU sink pad.
> + */
> + crop = &vsp1->drm->inputs[rpf->entity.index].crop;
> +
> + memset(&format, 0, sizeof(format));
> + format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + format.pad = RWPF_PAD_SINK;
> + format.format.width = crop->width + crop->left;
> + format.format.height = crop->height + crop->top;
> + format.format.code = rpf->fmtinfo->mbus;
> + format.format.field = V4L2_FIELD_NONE;
> +
> + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> + &format);
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(vsp1->dev,
> + "%s: set format %ux%u (%x) on RPF%u sink\n",
> + __func__, format.format.width, format.format.height,
> + format.format.code, rpf->entity.index);
> +
> + memset(&sel, 0, sizeof(sel));
> + sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + sel.pad = RWPF_PAD_SINK;
> + sel.target = V4L2_SEL_TGT_CROP;
> + sel.r = *crop;
> +
> + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL,
> + &sel);
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(vsp1->dev,
> + "%s: set selection (%u,%u)/%ux%u on RPF%u sink\n",
> + __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> + rpf->entity.index);
> +
> + /*
> + * RPF source, hardcode the format to ARGB8888 to turn on format
> + * conversion if needed.
> + */
> + format.pad = RWPF_PAD_SOURCE;
> +
> + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL,
> + &format);
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(vsp1->dev,
> + "%s: got format %ux%u (%x) on RPF%u source\n",
> + __func__, format.format.width, format.format.height,
> + format.format.code, rpf->entity.index);
> +
> + format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
> +
> + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> + &format);
> + if (ret < 0)
> + return ret;
> +
> + /* BRU sink, propagate the format from the RPF source. */
> + format.pad = bru_input;
> +
> + ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_fmt, NULL,
> + &format);
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
> + __func__, format.format.width, format.format.height,
> + format.format.code, BRU_NAME(pipe->bru), format.pad);
> +
> + sel.pad = bru_input;
> + sel.target = V4L2_SEL_TGT_COMPOSE;
> + sel.r = vsp1->drm->inputs[rpf->entity.index].compose;
> +
> + ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_selection, NULL,
> + &sel);
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(vsp1->dev, "%s: set selection (%u,%u)/%ux%u on %s pad %u\n",
> + __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> + BRU_NAME(pipe->bru), sel.pad);
> +
> + return 0;
> +}
> +
> +static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf *rpf)
> +{
> + return vsp1->drm->inputs[rpf->entity.index].zpos;
> +}
> +
> +/* Setup the input side of the pipeline (RPFs and BRU sink pads). */
> +static int vsp1_du_pipeline_setup_input(struct vsp1_device *vsp1,
Minor nit - shouldn't this be _setup_inputs(..)
as we could have multiple inputs, and it configures them all.
> + struct vsp1_pipeline *pipe)
> +{
> + struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, };
> + struct vsp1_bru *bru = to_bru(&pipe->bru->subdev);
> + unsigned int i;
> + int ret;
> +
> + /* Count the number of enabled inputs and sort them by Z-order. */
> + pipe->num_inputs = 0;
> +
> + for (i = 0; i < vsp1->info->rpf_count; ++i) {
> + struct vsp1_rwpf *rpf = vsp1->rpf[i];
> + unsigned int j;
> +
> + /*
> + * Make sure we don't accept more inputs than the hardware can
> + * handle. This is a temporary fix to avoid display stall, we
> + * need to instead allocate the BRU or BRS to display pipelines
> + * dynamically based on the number of planes they each use.
> + */
> + if (pipe->num_inputs >= pipe->bru->source_pad)
> + pipe->inputs[i] = NULL;
> +
> + if (!pipe->inputs[i])
> + continue;
> +
> + /* Insert the RPF in the sorted RPFs array. */
> + for (j = pipe->num_inputs++; j > 0; --j) {
> + if (rpf_zpos(vsp1, inputs[j-1]) <= rpf_zpos(vsp1, rpf))
> + break;
> + inputs[j] = inputs[j-1];
> + }
> +
> + inputs[j] = rpf;
> + }
> +
> + /* Setup the RPF input pipeline for every enabled input. */
> + for (i = 0; i < pipe->bru->source_pad; ++i) {
> + struct vsp1_rwpf *rpf = inputs[i];
> +
> + if (!rpf) {
> + bru->inputs[i].rpf = NULL;
> + continue;
> + }
> +
> + if (!rpf->entity.pipe) {
> + rpf->entity.pipe = pipe;
> + list_add_tail(&rpf->entity.list_pipe, &pipe->entities);
> + }
> +
> + bru->inputs[i].rpf = rpf;
> + rpf->bru_input = i;
> + rpf->entity.sink = pipe->bru;
> + rpf->entity.sink_pad = i;
> +
> + dev_dbg(vsp1->dev, "%s: connecting RPF.%u to %s:%u\n",
> + __func__, rpf->entity.index, BRU_NAME(pipe->bru), i);
> +
> + ret = vsp1_du_pipeline_setup_rpf(vsp1, pipe, rpf, i);
> + if (ret < 0) {
> + dev_err(vsp1->dev,
> + "%s: failed to setup RPF.%u\n",
> + __func__, rpf->entity.index);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> /* Configure all entities in the pipeline. */
> static void vsp1_du_pipeline_configure(struct vsp1_pipeline *pipe)
> {
> @@ -396,111 +575,6 @@ int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
> }
> EXPORT_SYMBOL_GPL(vsp1_du_atomic_update);
>
> -static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
> - struct vsp1_pipeline *pipe,
> - struct vsp1_rwpf *rpf, unsigned int bru_input)
> -{
> - struct v4l2_subdev_selection sel;
> - struct v4l2_subdev_format format;
> - const struct v4l2_rect *crop;
> - int ret;
> -
> - /*
> - * Configure the format on the RPF sink pad and propagate it up to the
> - * BRU sink pad.
> - */
> - crop = &vsp1->drm->inputs[rpf->entity.index].crop;
> -
> - memset(&format, 0, sizeof(format));
> - format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> - format.pad = RWPF_PAD_SINK;
> - format.format.width = crop->width + crop->left;
> - format.format.height = crop->height + crop->top;
> - format.format.code = rpf->fmtinfo->mbus;
> - format.format.field = V4L2_FIELD_NONE;
> -
> - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> - &format);
> - if (ret < 0)
> - return ret;
> -
> - dev_dbg(vsp1->dev,
> - "%s: set format %ux%u (%x) on RPF%u sink\n",
> - __func__, format.format.width, format.format.height,
> - format.format.code, rpf->entity.index);
> -
> - memset(&sel, 0, sizeof(sel));
> - sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> - sel.pad = RWPF_PAD_SINK;
> - sel.target = V4L2_SEL_TGT_CROP;
> - sel.r = *crop;
> -
> - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL,
> - &sel);
> - if (ret < 0)
> - return ret;
> -
> - dev_dbg(vsp1->dev,
> - "%s: set selection (%u,%u)/%ux%u on RPF%u sink\n",
> - __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> - rpf->entity.index);
> -
> - /*
> - * RPF source, hardcode the format to ARGB8888 to turn on format
> - * conversion if needed.
> - */
> - format.pad = RWPF_PAD_SOURCE;
> -
> - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL,
> - &format);
> - if (ret < 0)
> - return ret;
> -
> - dev_dbg(vsp1->dev,
> - "%s: got format %ux%u (%x) on RPF%u source\n",
> - __func__, format.format.width, format.format.height,
> - format.format.code, rpf->entity.index);
> -
> - format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
> -
> - ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
> - &format);
> - if (ret < 0)
> - return ret;
> -
> - /* BRU sink, propagate the format from the RPF source. */
> - format.pad = bru_input;
> -
> - ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_fmt, NULL,
> - &format);
> - if (ret < 0)
> - return ret;
> -
> - dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
> - __func__, format.format.width, format.format.height,
> - format.format.code, BRU_NAME(pipe->bru), format.pad);
> -
> - sel.pad = bru_input;
> - sel.target = V4L2_SEL_TGT_COMPOSE;
> - sel.r = vsp1->drm->inputs[rpf->entity.index].compose;
> -
> - ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_selection, NULL,
> - &sel);
> - if (ret < 0)
> - return ret;
> -
> - dev_dbg(vsp1->dev, "%s: set selection (%u,%u)/%ux%u on %s pad %u\n",
> - __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
> - BRU_NAME(pipe->bru), sel.pad);
> -
> - return 0;
> -}
> -
> -static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf *rpf)
> -{
> - return vsp1->drm->inputs[rpf->entity.index].zpos;
> -}
> -
> /**
> * vsp1_du_atomic_flush - Commit an atomic update
> * @dev: the VSP device
> @@ -511,69 +585,8 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index)
> struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> struct vsp1_drm_pipeline *drm_pipe = &vsp1->drm->pipe[pipe_index];
> struct vsp1_pipeline *pipe = &drm_pipe->pipe;
> - struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, };
> - struct vsp1_bru *bru = to_bru(&pipe->bru->subdev);
> - unsigned int i;
> - int ret;
> -
> - /* Count the number of enabled inputs and sort them by Z-order. */
> - pipe->num_inputs = 0;
> -
> - for (i = 0; i < vsp1->info->rpf_count; ++i) {
> - struct vsp1_rwpf *rpf = vsp1->rpf[i];
> - unsigned int j;
> -
> - /*
> - * Make sure we don't accept more inputs than the hardware can
> - * handle. This is a temporary fix to avoid display stall, we
> - * need to instead allocate the BRU or BRS to display pipelines
> - * dynamically based on the number of planes they each use.
> - */
> - if (pipe->num_inputs >= pipe->bru->source_pad)
> - pipe->inputs[i] = NULL;
> -
> - if (!pipe->inputs[i])
> - continue;
> -
> - /* Insert the RPF in the sorted RPFs array. */
> - for (j = pipe->num_inputs++; j > 0; --j) {
> - if (rpf_zpos(vsp1, inputs[j-1]) <= rpf_zpos(vsp1, rpf))
> - break;
> - inputs[j] = inputs[j-1];
> - }
> -
> - inputs[j] = rpf;
> - }
> -
> - /* Setup the RPF input pipeline for every enabled input. */
> - for (i = 0; i < pipe->bru->source_pad; ++i) {
> - struct vsp1_rwpf *rpf = inputs[i];
> -
> - if (!rpf) {
> - bru->inputs[i].rpf = NULL;
> - continue;
> - }
> -
> - if (!rpf->entity.pipe) {
> - rpf->entity.pipe = pipe;
> - list_add_tail(&rpf->entity.list_pipe, &pipe->entities);
> - }
> -
> - bru->inputs[i].rpf = rpf;
> - rpf->bru_input = i;
> - rpf->entity.sink = pipe->bru;
> - rpf->entity.sink_pad = i;
> -
> - dev_dbg(vsp1->dev, "%s: connecting RPF.%u to %s:%u\n",
> - __func__, rpf->entity.index, BRU_NAME(pipe->bru), i);
> -
> - ret = vsp1_du_setup_rpf_pipe(vsp1, pipe, rpf, i);
> - if (ret < 0)
> - dev_err(vsp1->dev,
> - "%s: failed to setup RPF.%u\n",
> - __func__, rpf->entity.index);
> - }
>
> + vsp1_du_pipeline_setup_input(vsp1, pipe);
> vsp1_du_pipeline_configure(pipe);
> }
> EXPORT_SYMBOL_GPL(vsp1_du_atomic_flush);
>
More information about the dri-devel
mailing list