[PATCH v13 08/10] drm: Expose modes with aspect ratio, only if requested

Daniel Vetter daniel at ffwll.ch
Thu May 3 06:26:26 UTC 2018


On Wed, May 02, 2018 at 12:20:20PM +0530, Nautiyal, Ankit K wrote:
> From: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> 
> We parse the EDID and add all the modes in the connector's modelist.
> This adds CEA modes with aspect ratio information too, regardless of
> whether user space requested this information or not.
> 
> This patch:
> -prunes the modes with aspect-ratio information, from a
>  connector's modelist, if the user-space has not set the aspect ratio
>  DRM client cap. However if such a mode is unique in the list, it is
>  kept in the list, with aspect-ratio flags reset.
> -prepares a list of exposed modes, which is used to find unique modes
>  if aspect-ratio is not allowed.
> -adds a new list_head 'exposed_head' in drm_mode_display, to traverse
>  the list of exposed modes.
> 
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Shashank Sharma <shashank.sharma at intel.com>
> Cc: Jose Abreu <jose.abreu at synopsys.com>
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> 
> V3: As suggested by Ville, modified the mechanism of pruning of modes
>     with aspect-ratio, if the aspect-ratio is not supported. Instead
>     of straight away pruning such a mode, the mode is retained with
>     aspect ratio bits set to zero, provided it is unique.
> V4: rebase
> V5: Addressed review comments from Ville:
>     -used a pointer to store last valid mode.
>     -avoided, modifying of picture_aspect_ratio in kernel mode,
>      instead only flags bits of user mode are reset (if aspect-ratio
>      is not supported).
> V6: As suggested by Ville, corrected the mode pruning logic and
>     elaborated the mode pruning logic and the assumptions taken.
> V7: rebase
> V8: rebase
> V9: rebase
> V10: rebase
> V11: Fixed the issue caused in kms_3d test, and enhanced the pruning
>      logic to correctly identify and prune modes with aspect-ratio,
>      if aspect-ratio cap is not set.
> V12: As suggested by Ville, added another list_head in
>      drm_mode_display to traverse the list of exposed modes and
>      avoided duplication of modes.
> V13: Minor modifications, as suggested by Ville.
> ---
>  drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++++++++++++++++++++++-------
>  include/drm/drm_modes.h         | 13 ++++++++++++
>  2 files changed, 51 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index dfc8ca1..8ca1149 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1531,15 +1531,36 @@ static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *conne
>  	return connector->encoder;
>  }
>  
> -static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
> -					 const struct drm_file *file_priv)
> +static bool
> +drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
> +			     const struct list_head *export_list,
> +			     const struct drm_file *file_priv)
>  {
>  	/*
>  	 * If user-space hasn't configured the driver to expose the stereo 3D
>  	 * modes, don't expose them.
>  	 */
> +
>  	if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
>  		return false;
> +	/*
> +	 * If user-space hasn't configured the driver to expose the modes
> +	 * with aspect-ratio, don't expose them. However if such a mode
> +	 * is unique, let it be exposed, but reset the aspect-ratio flags
> +	 * while preparing the list of user-modes.
> +	 */
> +	if (!file_priv->aspect_ratio_allowed &&
> +	    mode->picture_aspect_ratio != HDMI_PICTURE_ASPECT_NONE) {
> +		struct drm_display_mode *mode_itr;
> +
> +		list_for_each_entry(mode_itr, export_list, export_head)

By walking the list of only the modes already added to the export list we
rely on ASPECT_NONE being first if present. That seems to be a bit
fragile. If we instead walk over all present modes (i.e. connector->modes)
then I think that's avoided. With that changed:

Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>

> +			if (drm_mode_match(mode_itr, mode,
> +					   DRM_MODE_MATCH_TIMINGS |
> +					   DRM_MODE_MATCH_CLOCK |
> +					   DRM_MODE_MATCH_FLAGS |
> +					   DRM_MODE_MATCH_3D_FLAGS))
> +				return false;
> +	}
>  
>  	return true;
>  }
> @@ -1559,6 +1580,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,
>  	struct drm_mode_modeinfo u_mode;
>  	struct drm_mode_modeinfo __user *mode_ptr;
>  	uint32_t __user *encoder_ptr;
> +	LIST_HEAD(export_list);
>  
>  	if (!drm_core_check_feature(dev, DRIVER_MODESET))
>  		return -EINVAL;
> @@ -1607,21 +1629,30 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,
>  
>  	/* delayed so we get modes regardless of pre-fill_modes state */
>  	list_for_each_entry(mode, &connector->modes, head)
> -		if (drm_mode_expose_to_userspace(mode, file_priv))
> +		if (drm_mode_expose_to_userspace(mode, &export_list,
> +						 file_priv)) {
> +			list_add_tail(&mode->export_head, &export_list);
>  			mode_count++;
> +		}
>  
>  	/*
>  	 * This ioctl is called twice, once to determine how much space is
>  	 * needed, and the 2nd time to fill it.
> +	 * The modes that need to be exposed to the user are maintained in the
> +	 * 'export_list'. When the ioctl is called first time to determine the,
> +	 * space, the export_list gets filled, to find the no.of modes. In the
> +	 * 2nd time, the user modes are filled, one by one from the export_list.
>  	 */
>  	if ((out_resp->count_modes >= mode_count) && mode_count) {
>  		copied = 0;
>  		mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
> -		list_for_each_entry(mode, &connector->modes, head) {
> -			if (!drm_mode_expose_to_userspace(mode, file_priv))
> -				continue;
> -
> +		list_for_each_entry(mode, &export_list, export_head) {
>  			drm_mode_convert_to_umode(&u_mode, mode);
> +			/*
> +			 * Reset aspect ratio flags of user-mode, if modes with
> +			 * aspect-ratio are not supported.
> +			 */
> +			drm_mode_filter_aspect_ratio_flags(file_priv, &u_mode);
>  			if (copy_to_user(mode_ptr + copied,
>  					 &u_mode, sizeof(u_mode))) {
>  				ret = -EFAULT;
> diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
> index 2f78b7e..b159fe0 100644
> --- a/include/drm/drm_modes.h
> +++ b/include/drm/drm_modes.h
> @@ -411,6 +411,19 @@ struct drm_display_mode {
>  	 * Field for setting the HDMI picture aspect ratio of a mode.
>  	 */
>  	enum hdmi_picture_aspect picture_aspect_ratio;
> +
> +	/**
> +	 * @export_head:
> +	 *
> +	 * struct list_head for modes to be exposed to the userspace.
> +	 * This is to maintain a list of exposed modes while preparing
> +	 * user-mode's list in drm_mode_getconnector ioctl. The purpose of this
> +	 * list_head only lies in the ioctl function, and is not expected to be
> +	 * used outside the function.
> +	 * Once used, the stale pointers are not reset, but left as it is, to
> +	 * avoid overhead of protecting it by mode_config.mutex.
> +	 */
> +	struct list_head export_head;
>  };
>  
>  /**
> -- 
> 2.7.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the dri-devel mailing list