[Intel-gfx] [PATCH v3 21/40] drm/i915: Define Intel HDCP2.2 registers

[Shankar, Uma]

>-----Original Message-----
>From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of
>Ramalingam C
>Sent: Tuesday, April 3, 2018 7:28 PM
>To: intel-gfx at lists.freedesktop.org; dri-devel at lists.freedesktop.org;
>seanpaul at chromium.org; daniel at ffwll.ch; chris at chris-wilson.co.uk;
>jani.nikula at linux.intel.com; Winkler, Tomas <tomas.winkler at intel.com>;
>Usyskin, Alexander <alexander.usyskin at intel.com>
>Cc: Vivi, Rodrigo <rodrigo.vivi at intel.com>
>Subject: [Intel-gfx] [PATCH v3 21/40] drm/i915: Define Intel HDCP2.2 registers
>
>Intel HDCP2.2 registers are defined with addr offsets and bit details.
>
>v2:
>  Replaced the arith calc with _PICK [Sean Paul]
>v3:
>  No changes.
>
>Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
>---
> drivers/gpu/drm/i915/i915_reg.h | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index e6a8c0ee7df1..f04ad3c15abd 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -8649,6 +8649,38 @@ enum skl_power_gate {
> #define  HDCP_STATUS_CIPHER		BIT(16)
> #define  HDCP_STATUS_FRAME_CNT(x)	((x >> 8) & 0xff)
>
>+/* HDCP2.2 Registers */
>+#define _PORTA_HDCP2_BASE		0x66800
>+#define _PORTB_HDCP2_BASE		0x66500
>+#define _PORTC_HDCP2_BASE		0x66600
>+#define _PORTD_HDCP2_BASE		0x66700
>+#define _PORTE_HDCP2_BASE		0x66A00
>+#define _PORTF_HDCP2_BASE		0x66900
>+#define _PORT_HDCP2_BASE(port, x)	_MMIO(_PICK(port, \
>+					  _PORTA_HDCP2_BASE, \
>+					  _PORTB_HDCP2_BASE, \
>+					  _PORTC_HDCP2_BASE, \
>+					  _PORTD_HDCP2_BASE, \
>+					  _PORTE_HDCP2_BASE, \
>+					  _PORTF_HDCP2_BASE) + x)
>+
>+#define HDCP2_AUTH_DDI(port)		_PORT_HDCP2_BASE(port,
>0x98)
>+#define   AUTH_LINK_AUTHENTICATED	BIT(31)
>+#define   AUTH_LINK_TYPE		BIT(30)
>+#define   AUTH_FORCE_CLR_INPUTCTR	BIT(19)
>+#define   AUTH_CLR_KEYS			BIT(18)
>+
>+#define HDCP2_CTR_DDI(port)		_PORT_HDCP2_BASE(port, 0xB0)

Rename it to HDCP2_CTL_DDI to match with spec and avoid any ambiguity.

>+#define   CTL_LINK_ENCRYPTION_REQ	BIT(31)
>+
>+#define HDCP2_STATUS_DDI(port)		_PORT_HDCP2_BASE(port,
>0xB4)
>+#define   STREAM_ENCRYPTION_STATUS_A	BIT(31)
>+#define   STREAM_ENCRYPTION_STATUS_B	BIT(30)
>+#define   STREAM_ENCRYPTION_STATUS_C	BIT(29)
>+#define   LINK_TYPE_STATUS		BIT(22)
>+#define   LINK_AUTH_STATUS		BIT(21)
>+#define   LINK_ENCRYPTION_STATUS	BIT(20)
>+
> /* Per-pipe DDI Function Control */
> #define _TRANS_DDI_FUNC_CTL_A		0x60400
> #define _TRANS_DDI_FUNC_CTL_B		0x61400
>--
>2.7.4
>
>_______________________________________________
>Intel-gfx mailing list
>Intel-gfx at lists.freedesktop.org
>https://lists.freedesktop.org/mailman/listinfo/intel-gfx