[DPU PATCH 05/11] drm/msm/dpu: update dpu sub-block offsets wrt dpu base address
Rajesh Yadav
ryadav at codeaurora.org
Thu May 10 08:29:39 UTC 2018
The dpu sub-block offsets were defined wrt mdss base address
instead of dpu base address.
Since, dpu is now defined as a separate device, update hw catalog
offsets for all dpu sub blocks wrt dpu base address.
Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 68 +++++++++++------------
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 18 +++---
2 files changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index c5b370f..2fd3254 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -80,7 +80,7 @@
static struct dpu_mdp_cfg sdm845_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
- .base = 0x1000, .len = 0x45C,
+ .base = 0x0, .len = 0x45C,
.features = 0,
.highest_bank_bit = 0x2,
.has_dest_scaler = true,
@@ -111,27 +111,27 @@
static struct dpu_ctl_cfg sdm845_ctl[] = {
{
.name = "ctl_0", .id = CTL_0,
- .base = 0x2000, .len = 0xE4,
+ .base = 0x1000, .len = 0xE4,
.features = BIT(DPU_CTL_SPLIT_DISPLAY)
},
{
.name = "ctl_1", .id = CTL_1,
- .base = 0x2200, .len = 0xE4,
+ .base = 0x1200, .len = 0xE4,
.features = BIT(DPU_CTL_SPLIT_DISPLAY)
},
{
.name = "ctl_2", .id = CTL_2,
- .base = 0x2400, .len = 0xE4,
+ .base = 0x1400, .len = 0xE4,
.features = 0
},
{
.name = "ctl_3", .id = CTL_3,
- .base = 0x2600, .len = 0xE4,
+ .base = 0x1600, .len = 0xE4,
.features = 0
},
{
.name = "ctl_4", .id = CTL_4,
- .base = 0x2800, .len = 0xE4,
+ .base = 0x1800, .len = 0xE4,
.features = 0
},
};
@@ -211,21 +211,21 @@
}
static struct dpu_sspp_cfg sdm845_sspp[] = {
- SSPP_VIG_BLK("sspp_0", SSPP_VIG0, 0x5000,
+ SSPP_VIG_BLK("sspp_0", SSPP_VIG0, 0x4000,
sdm845_vig_sblk_0, 0, DPU_CLK_CTRL_VIG0),
- SSPP_VIG_BLK("sspp_1", SSPP_VIG1, 0x7000,
+ SSPP_VIG_BLK("sspp_1", SSPP_VIG1, 0x6000,
sdm845_vig_sblk_1, 4, DPU_CLK_CTRL_VIG1),
- SSPP_VIG_BLK("sspp_2", SSPP_VIG2, 0x9000,
+ SSPP_VIG_BLK("sspp_2", SSPP_VIG2, 0x8000,
sdm845_vig_sblk_2, 8, DPU_CLK_CTRL_VIG2),
- SSPP_VIG_BLK("sspp_3", SSPP_VIG3, 0xb000,
+ SSPP_VIG_BLK("sspp_3", SSPP_VIG3, 0xa000,
sdm845_vig_sblk_3, 12, DPU_CLK_CTRL_VIG3),
- SSPP_DMA_BLK("sspp_8", SSPP_DMA0, 0x25000,
+ SSPP_DMA_BLK("sspp_8", SSPP_DMA0, 0x24000,
sdm845_dma_sblk_0, 1, DPU_CLK_CTRL_DMA0),
- SSPP_DMA_BLK("sspp_9", SSPP_DMA1, 0x27000,
+ SSPP_DMA_BLK("sspp_9", SSPP_DMA1, 0x26000,
sdm845_dma_sblk_1, 5, DPU_CLK_CTRL_DMA1),
- SSPP_DMA_BLK("sspp_10", SSPP_DMA2, 0x29000,
+ SSPP_DMA_BLK("sspp_10", SSPP_DMA2, 0x28000,
sdm845_dma_sblk_2, 9, DPU_CLK_CTRL_CURSOR0),
- SSPP_DMA_BLK("sspp_11", SSPP_DMA3, 0x2b000,
+ SSPP_DMA_BLK("sspp_11", SSPP_DMA3, 0x2a000,
sdm845_dma_sblk_3, 13, DPU_CLK_CTRL_CURSOR1),
};
@@ -252,17 +252,17 @@
.lm_pair_mask = (1 << _lmpair) \
}
static struct dpu_lm_cfg sdm845_lm[] = {
- LM_BLK("lm_0", LM_0, 0x45000, DSPP_0,
+ LM_BLK("lm_0", LM_0, 0x44000, DSPP_0,
DS_0, PINGPONG_0, LM_1),
- LM_BLK("lm_1", LM_1, 0x46000, DSPP_1,
+ LM_BLK("lm_1", LM_1, 0x45000, DSPP_1,
DS_1, PINGPONG_1, LM_0),
- LM_BLK("lm_2", LM_2, 0x47000, DSPP_2,
+ LM_BLK("lm_2", LM_2, 0x46000, DSPP_2,
DS_MAX, PINGPONG_2, LM_5),
LM_BLK("lm_3", LM_3, 0x0, DSPP_MAX,
DS_MAX, PINGPONG_MAX, 0),
LM_BLK("lm_4", LM_4, 0x0, DSPP_MAX,
DS_MAX, PINGPONG_MAX, 0),
- LM_BLK("lm_5", LM_5, 0x4a000, DSPP_3,
+ LM_BLK("lm_5", LM_5, 0x49000, DSPP_3,
DS_MAX, PINGPONG_3, LM_2),
};
@@ -270,7 +270,7 @@
* DSPP sub blocks config
*************************************************************/
static struct dpu_dspp_top_cfg sdm845_dspp_top = {
- .name = "dspp_top", .base = 0x1300, .len = 0xc
+ .name = "dspp_top", .base = 0x300, .len = 0xc
};
static const struct dpu_dspp_sub_blks sdm845_dspp_sblk = {
@@ -304,10 +304,10 @@
}
static struct dpu_dspp_cfg sdm845_dspp[] = {
- DSPP_BLK("dspp_0", DSPP_0, 0x55000),
- DSPP_BLK("dspp_1", DSPP_1, 0x57000),
- DSPP_BLK("dspp_2", DSPP_2, 0x59000),
- DSPP_BLK("dspp_3", DSPP_3, 0x5b000),
+ DSPP_BLK("dspp_0", DSPP_0, 0x54000),
+ DSPP_BLK("dspp_1", DSPP_1, 0x56000),
+ DSPP_BLK("dspp_2", DSPP_2, 0x58000),
+ DSPP_BLK("dspp_3", DSPP_3, 0x5a000),
};
/*************************************************************
@@ -315,7 +315,7 @@
*************************************************************/
static const struct dpu_ds_top_cfg sdm845_ds_top = {
.name = "ds_top_0", .id = DS_TOP,
- .base = 0x61000, .len = 0xc,
+ .base = 0x60000, .len = 0xc,
.maxinputwidth = DEFAULT_DPU_LINE_WIDTH,
.maxoutputwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.maxupscale = MAX_UPSCALE_RATIO,
@@ -365,10 +365,10 @@
}
static struct dpu_pingpong_cfg sdm845_pp[] = {
- PP_BLK_TE("pingpong_0", PINGPONG_0, 0x71000),
- PP_BLK_TE("pingpong_1", PINGPONG_1, 0x71800),
- PP_BLK("pingpong_2", PINGPONG_2, 0x72000),
- PP_BLK("pingpong_3", PINGPONG_3, 0x72800),
+ PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000),
+ PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800),
+ PP_BLK("pingpong_2", PINGPONG_2, 0x71000),
+ PP_BLK("pingpong_3", PINGPONG_3, 0x71800),
};
/*************************************************************
@@ -384,10 +384,10 @@
}
static struct dpu_intf_cfg sdm845_intf[] = {
- INTF_BLK("intf_0", INTF_0, 0x6B000, INTF_DP, 0),
- INTF_BLK("intf_1", INTF_1, 0x6B800, INTF_DSI, 0),
- INTF_BLK("intf_2", INTF_2, 0x6C000, INTF_DSI, 1),
- INTF_BLK("intf_3", INTF_3, 0x6C800, INTF_DP, 1),
+ INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0),
+ INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0),
+ INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1),
+ INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1),
};
/*************************************************************
@@ -401,7 +401,7 @@
static struct dpu_wb_cfg sdm845_wb[] = {
{
.name = "wb_2", .id = WB_2,
- .base = 0x66000, .len = 0x2c8,
+ .base = 0x65000, .len = 0x2c8,
.features = WB2_SDM845_MASK,
.sblk = &sdm845_wb2_sblk,
.format_list = wb2_formats,
@@ -414,7 +414,7 @@
static struct dpu_cdm_cfg sdm845_cdm[] = {
{
.name = "cdm_0", .id = CDM_0,
- .base = 0x7A200, .len = 0x224,
+ .base = 0x79200, .len = 0x224,
.features = 0,
.intf_connect = BIT(INTF_3),
.wb_connect = BIT(WB_2)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index 7093ba4..2de13e3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -20,16 +20,16 @@
/**
* Register offsets in MDSS register file for the interrupt registers
- * w.r.t. to the MDSS base
+ * w.r.t. to the MDP base
*/
-#define MDP_SSPP_TOP0_OFF 0x1000
-#define MDP_INTF_0_OFF 0x6B000
-#define MDP_INTF_1_OFF 0x6B800
-#define MDP_INTF_2_OFF 0x6C000
-#define MDP_INTF_3_OFF 0x6C800
-#define MDP_INTF_4_OFF 0x6D000
-#define MDP_AD4_0_OFF 0x7D000
-#define MDP_AD4_1_OFF 0x7E000
+#define MDP_SSPP_TOP0_OFF 0x0
+#define MDP_INTF_0_OFF 0x6A000
+#define MDP_INTF_1_OFF 0x6A800
+#define MDP_INTF_2_OFF 0x6B000
+#define MDP_INTF_3_OFF 0x6B800
+#define MDP_INTF_4_OFF 0x6C000
+#define MDP_AD4_0_OFF 0x7C000
+#define MDP_AD4_1_OFF 0x7D000
#define MDP_AD4_INTR_EN_OFF 0x41c
#define MDP_AD4_INTR_CLEAR_OFF 0x424
#define MDP_AD4_INTR_STATUS_OFF 0x420
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the dri-devel
mailing list