[PATCH v3] display: panel: Add AUO g070vvn01 display support (800x480)

Lukasz Majewski lukma at denx.de
Wed May 9 15:59:13 UTC 2018


This commit adds support for AUO's 7.0" display.

Signed-off-by: Lukasz Majewski <lukma at denx.de>

---
Changes for v3:
- Remove not used 'bus-format-override = "rgb565";' property

Changes for v2:
- Add *.txt suffix to the auo,g070wn01 file
---
 .../bindings/display/panel/auo,g070vvn01.txt       | 29 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               | 31 ++++++++++++++++++++++
 2 files changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt

diff --git a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
new file mode 100644
index 000000000000..49e4105378f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
@@ -0,0 +1,29 @@
+AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g070vvn01"
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: single regulator to provide the supply voltage
+
+Required nodes:
+- port: Parallel port mapping to connect this display
+
+This panel needs single power supply voltage. Its backlight is conntrolled
+via PWM signal.
+
+Example:
+--------
+
+Example device-tree definition when connected to iMX6Q based board
+
+	lcd_panel: lcd-panel {
+		compatible = "auo,g070vvn01";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_display>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index cbf1ab404ee7..d9984bdb5bb5 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -581,6 +581,34 @@ static const struct panel_desc auo_b133htn01 = {
 	},
 };
 
+static const struct display_timing auo_g070vvn01_timings = {
+	.pixelclock = { 33300000, 34209000, 45000000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 20, 40, 200 },
+	.hback_porch = { 87, 40, 1 },
+	.hsync_len = { 1, 48, 87 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 5, 13, 200 },
+	.vback_porch = { 31, 31, 29 },
+	.vsync_len = { 1, 1, 3 },
+};
+
+static const struct panel_desc auo_g070vvn01 = {
+	.timings = &auo_g070vvn01_timings,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+	.delay = {
+		.prepare = 200,
+		.enable = 50,
+		.disable = 50,
+		.unprepare = 1000,
+	},
+};
+
 static const struct drm_display_mode auo_g104sn02_mode = {
 	.clock = 40000,
 	.hdisplay = 800,
@@ -2095,6 +2123,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "auo,b133xtn01",
 		.data = &auo_b133xtn01,
 	}, {
+		.compatible = "auo,g070vvn01",
+		.data = &auo_g070vvn01,
+	}, {
 		.compatible = "auo,g104sn02",
 		.data = &auo_g104sn02,
 	}, {
-- 
2.11.0



More information about the dri-devel mailing list