[PATCH RESEND] display: panel: Add KOE tx14d24vm1bpa display support (320x240)
Lukasz Majewski
lukma at denx.de
Wed May 9 15:43:38 UTC 2018
This commit adds support for KOE's 5.7" display.
Signed-off-by: Lukasz Majewski <lukma at denx.de>
---
.../bindings/display/panel/koe,tx14d24vm1bpa.txt | 42 ++++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++
2 files changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
new file mode 100644
index 000000000000..be7ac666807b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
@@ -0,0 +1,42 @@
+Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
+
+Required properties:
+- compatible: should be "koe,tx14d24vm1bpa"
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: single regulator to provide the supply voltage
+
+Required nodes:
+- port: Parallel port mapping to connect this display
+
+This panel needs single power supply voltage. Its backlight is conntrolled
+via PWM signal.
+
+Example:
+--------
+
+Example device-tree definition when connected to iMX53 based board
+
+ lcd_panel: lcd-panel {
+ compatible = "koe,tx14d24vm1bpa";
+ backlight = <&backlight_lcd>;
+ power-supply = <®_3v3>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+Then one needs to extend the dispX node:
+
+ lcd_display: disp1 {
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index d9984bdb5bb5..103b43ce7dee 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1268,6 +1268,29 @@ static const struct panel_desc innolux_zj070na_01p = {
},
};
+static const struct display_timing koe_tx14d24vm1bpa_timing = {
+ .pixelclock = { 5580000, 5850000, 6200000 },
+ .hactive = { 320, 320, 320 },
+ .hfront_porch = { 30, 30, 30 },
+ .hback_porch = { 30, 30, 30 },
+ .hsync_len = { 1, 5, 17 },
+ .vactive = { 240, 240, 240 },
+ .vfront_porch = { 6, 6, 6 },
+ .vback_porch = { 5, 5, 5 },
+ .vsync_len = { 1, 2, 11 },
+ .flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc koe_tx14d24vm1bpa = {
+ .timings = &koe_tx14d24vm1bpa_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 115,
+ .height = 86,
+ },
+};
+
static const struct display_timing koe_tx31d200vm0baa_timing = {
.pixelclock = { 39600000, 43200000, 48000000 },
.hactive = { 1280, 1280, 1280 },
@@ -2204,6 +2227,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "innolux,zj070na-01p",
.data = &innolux_zj070na_01p,
}, {
+ .compatible = "koe,tx14d24vm1bpa",
+ .data = &koe_tx14d24vm1bpa,
+ }, {
.compatible = "koe,tx31d200vm0baa",
.data = &koe_tx31d200vm0baa,
}, {
--
2.11.0
More information about the dri-devel
mailing list