[DPU PATCH 08/11] drm/msm/dpu: remove power management code from dpu_power_handle
Sean Paul
seanpaul at chromium.org
Thu May 10 15:22:20 UTC 2018
On Thu, May 10, 2018 at 01:59:42PM +0530, Rajesh Yadav wrote:
> Mdss main power supply (mdss_gdsc) is implemented as a
> generic power domain and mdss top level wrapper device
> manage it via runtime_pm. Remove custom power management
> code from dpu_power_handle.
>
> Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
Reviewed-by: Sean Paul <seanpaul at chromium.org>
> ---
> drivers/gpu/drm/msm/dpu_power_handle.c | 190 +--------------------------------
> drivers/gpu/drm/msm/dpu_power_handle.h | 2 -
> 2 files changed, 1 insertion(+), 191 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dpu_power_handle.c b/drivers/gpu/drm/msm/dpu_power_handle.c
> index 17bae4b..909fbb8 100644
> --- a/drivers/gpu/drm/msm/dpu_power_handle.c
> +++ b/drivers/gpu/drm/msm/dpu_power_handle.c
> @@ -101,150 +101,6 @@ void dpu_power_client_destroy(struct dpu_power_handle *phandle,
> }
> }
>
> -static int dpu_power_parse_dt_supply(struct platform_device *pdev,
> - struct dss_module_power *mp)
> -{
> - int i = 0, rc = 0;
> - u32 tmp = 0;
> - struct device_node *of_node = NULL, *supply_root_node = NULL;
> - struct device_node *supply_node = NULL;
> -
> - if (!pdev || !mp) {
> - pr_err("invalid input param pdev:%pK mp:%pK\n", pdev, mp);
> - return -EINVAL;
> - }
> -
> - of_node = pdev->dev.of_node;
> -
> - mp->num_vreg = 0;
> - supply_root_node = of_get_child_by_name(of_node,
> - "qcom,platform-supply-entries");
> - if (!supply_root_node) {
> - pr_debug("no supply entry present\n");
> - return rc;
> - }
> -
> - for_each_child_of_node(supply_root_node, supply_node)
> - mp->num_vreg++;
> -
> - if (mp->num_vreg == 0) {
> - pr_debug("no vreg\n");
> - return rc;
> - }
> -
> - pr_debug("vreg found. count=%d\n", mp->num_vreg);
> - mp->vreg_config = devm_kzalloc(&pdev->dev, sizeof(struct dss_vreg) *
> - mp->num_vreg, GFP_KERNEL);
> - if (!mp->vreg_config) {
> - rc = -ENOMEM;
> - return rc;
> - }
> -
> - for_each_child_of_node(supply_root_node, supply_node) {
> -
> - const char *st = NULL;
> -
> - rc = of_property_read_string(supply_node,
> - "qcom,supply-name", &st);
> - if (rc) {
> - pr_err("error reading name. rc=%d\n", rc);
> - goto error;
> - }
> -
> - strlcpy(mp->vreg_config[i].vreg_name, st,
> - sizeof(mp->vreg_config[i].vreg_name));
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-min-voltage", &tmp);
> - if (rc) {
> - pr_err("error reading min volt. rc=%d\n", rc);
> - goto error;
> - }
> - mp->vreg_config[i].min_voltage = tmp;
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-max-voltage", &tmp);
> - if (rc) {
> - pr_err("error reading max volt. rc=%d\n", rc);
> - goto error;
> - }
> - mp->vreg_config[i].max_voltage = tmp;
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-enable-load", &tmp);
> - if (rc) {
> - pr_err("error reading enable load. rc=%d\n", rc);
> - goto error;
> - }
> - mp->vreg_config[i].enable_load = tmp;
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-disable-load", &tmp);
> - if (rc) {
> - pr_err("error reading disable load. rc=%d\n", rc);
> - goto error;
> - }
> - mp->vreg_config[i].disable_load = tmp;
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-pre-on-sleep", &tmp);
> - if (rc)
> - pr_debug("error reading supply pre sleep value. rc=%d\n",
> - rc);
> -
> - mp->vreg_config[i].pre_on_sleep = (!rc ? tmp : 0);
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-pre-off-sleep", &tmp);
> - if (rc)
> - pr_debug("error reading supply pre sleep value. rc=%d\n",
> - rc);
> -
> - mp->vreg_config[i].pre_off_sleep = (!rc ? tmp : 0);
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-post-on-sleep", &tmp);
> - if (rc)
> - pr_debug("error reading supply post sleep value. rc=%d\n",
> - rc);
> -
> - mp->vreg_config[i].post_on_sleep = (!rc ? tmp : 0);
> -
> - rc = of_property_read_u32(supply_node,
> - "qcom,supply-post-off-sleep", &tmp);
> - if (rc)
> - pr_debug("error reading supply post sleep value. rc=%d\n",
> - rc);
> -
> - mp->vreg_config[i].post_off_sleep = (!rc ? tmp : 0);
> -
> - pr_debug("%s min=%d, max=%d, enable=%d, disable=%d, preonsleep=%d, postonsleep=%d, preoffsleep=%d, postoffsleep=%d\n",
> - mp->vreg_config[i].vreg_name,
> - mp->vreg_config[i].min_voltage,
> - mp->vreg_config[i].max_voltage,
> - mp->vreg_config[i].enable_load,
> - mp->vreg_config[i].disable_load,
> - mp->vreg_config[i].pre_on_sleep,
> - mp->vreg_config[i].post_on_sleep,
> - mp->vreg_config[i].pre_off_sleep,
> - mp->vreg_config[i].post_off_sleep);
> - ++i;
> -
> - rc = 0;
> - }
> -
> - return rc;
> -
> -error:
> - if (mp->vreg_config) {
> - devm_kfree(&pdev->dev, mp->vreg_config);
> - mp->vreg_config = NULL;
> - mp->num_vreg = 0;
> - }
> -
> - return rc;
> -}
> -
> #ifdef CONFIG_QCOM_BUS_SCALING
>
> #define MAX_AXI_PORT_COUNT 3
> @@ -614,33 +470,18 @@ int dpu_power_resource_init(struct platform_device *pdev,
> struct dpu_power_handle *phandle)
> {
> int rc = 0, i;
> - struct dss_module_power *mp;
>
> if (!phandle || !pdev) {
> pr_err("invalid input param\n");
> rc = -EINVAL;
> goto end;
> }
> - mp = &phandle->mp;
> phandle->dev = &pdev->dev;
>
> - rc = dpu_power_parse_dt_supply(pdev, mp);
> - if (rc) {
> - pr_err("device vreg supply parsing failed\n");
> - goto end;
> - }
> -
> - rc = msm_dss_config_vreg(&pdev->dev,
> - mp->vreg_config, mp->num_vreg, 1);
> - if (rc) {
> - pr_err("vreg config failed rc=%d\n", rc);
> - goto vreg_err;
> - }
> -
> rc = dpu_power_reg_bus_parse(pdev, phandle);
> if (rc) {
> pr_err("register bus parse failed rc=%d\n", rc);
> - goto bus_err;
> + goto end;
> }
>
> for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
> @@ -666,12 +507,6 @@ int dpu_power_resource_init(struct platform_device *pdev,
> for (i--; i >= 0; i--)
> dpu_power_data_bus_unregister(&phandle->data_bus_handle[i]);
> dpu_power_reg_bus_unregister(phandle->reg_bus_hdl);
> -bus_err:
> - msm_dss_config_vreg(&pdev->dev, mp->vreg_config, mp->num_vreg, 0);
> -vreg_err:
> - if (mp->vreg_config)
> - devm_kfree(&pdev->dev, mp->vreg_config);
> - mp->num_vreg = 0;
> end:
> return rc;
> }
> @@ -679,7 +514,6 @@ int dpu_power_resource_init(struct platform_device *pdev,
> void dpu_power_resource_deinit(struct platform_device *pdev,
> struct dpu_power_handle *phandle)
> {
> - struct dss_module_power *mp;
> struct dpu_power_client *curr_client, *next_client;
> struct dpu_power_event *curr_event, *next_event;
> int i;
> @@ -688,7 +522,6 @@ void dpu_power_resource_deinit(struct platform_device *pdev,
> pr_err("invalid input param\n");
> return;
> }
> - mp = &phandle->mp;
>
> mutex_lock(&phandle->phandle_lock);
> list_for_each_entry_safe(curr_client, next_client,
> @@ -714,13 +547,6 @@ void dpu_power_resource_deinit(struct platform_device *pdev,
> dpu_power_data_bus_unregister(&phandle->data_bus_handle[i]);
>
> dpu_power_reg_bus_unregister(phandle->reg_bus_hdl);
> -
> - msm_dss_config_vreg(&pdev->dev, mp->vreg_config, mp->num_vreg, 0);
> -
> - if (mp->vreg_config)
> - devm_kfree(&pdev->dev, mp->vreg_config);
> -
> - mp->num_vreg = 0;
> }
>
> int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> @@ -730,15 +556,12 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> bool changed = false;
> u32 max_usecase_ndx = VOTE_INDEX_DISABLE, prev_usecase_ndx;
> struct dpu_power_client *client;
> - struct dss_module_power *mp;
>
> if (!phandle || !pclient) {
> pr_err("invalid input argument\n");
> return -EINVAL;
> }
>
> - mp = &phandle->mp;
> -
> mutex_lock(&phandle->phandle_lock);
> if (enable)
> pclient->refcount++;
> @@ -783,13 +606,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> }
> }
>
> - rc = msm_dss_enable_vreg(mp->vreg_config, mp->num_vreg,
> - enable);
> - if (rc) {
> - pr_err("failed to enable vregs rc=%d\n", rc);
> - goto vreg_err;
> - }
> -
> rc = dpu_power_reg_bus_update(phandle->reg_bus_hdl,
> max_usecase_ndx);
> if (rc) {
> @@ -807,8 +623,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> dpu_power_reg_bus_update(phandle->reg_bus_hdl,
> max_usecase_ndx);
>
> - msm_dss_enable_vreg(mp->vreg_config, mp->num_vreg,
> - enable);
> for (i = 0 ; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++)
> dpu_power_data_bus_update(&phandle->data_bus_handle[i],
> enable);
> @@ -822,8 +636,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> return rc;
>
> reg_bus_hdl_err:
> - msm_dss_enable_vreg(mp->vreg_config, mp->num_vreg, 0);
> -vreg_err:
> for (i = 0 ; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++)
> dpu_power_data_bus_update(&phandle->data_bus_handle[i], 0);
> data_bus_hdl_err:
> diff --git a/drivers/gpu/drm/msm/dpu_power_handle.h b/drivers/gpu/drm/msm/dpu_power_handle.h
> index 83f048d..9a6d4b9 100644
> --- a/drivers/gpu/drm/msm/dpu_power_handle.h
> +++ b/drivers/gpu/drm/msm/dpu_power_handle.h
> @@ -147,7 +147,6 @@ struct dpu_power_event {
>
> /**
> * struct dpu_power_handle: power handle main struct
> - * @mp: module power for clock and regulator
> * @client_clist: master list to store all clients
> * @phandle_lock: lock to synchronize the enable/disable
> * @dev: pointer to device structure
> @@ -157,7 +156,6 @@ struct dpu_power_event {
> * @event_list: current power handle event list
> */
> struct dpu_power_handle {
> - struct dss_module_power mp;
> struct list_head power_client_clist;
> struct mutex phandle_lock;
> struct device *dev;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
Sean Paul, Software Engineer, Google / Chromium OS
More information about the dri-devel
mailing list