[DPU PATCH 11/11] drm/msm/dpu: move dpu_power_handle to dpu folder

[Sean Paul]

On Thu, May 10, 2018 at 01:59:45PM +0530, Rajesh Yadav wrote:
> Now, since dpu_power_handle manages only bus scaling
> and power enable/disable notifications which are restricted
> to dpu driver, move dpu_power_handle to dpu folder.
> 
> Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
> ---
>  drivers/gpu/drm/msm/Makefile                     |   2 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c     |   1 -
>  drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c    |   5 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c         |   7 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h         |   2 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c      |   1 -
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c          |  39 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h          |   1 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 694 +++++++++++++++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 288 ++++++++++
>  drivers/gpu/drm/msm/dpu_power_handle.c           | 694 -----------------------
>  drivers/gpu/drm/msm/dpu_power_handle.h           | 288 ----------
>  drivers/gpu/drm/msm/msm_drv.c                    |   9 -
>  drivers/gpu/drm/msm/msm_drv.h                    |   4 -
>  14 files changed, 1014 insertions(+), 1021 deletions(-)
>  create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
>  create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
>  delete mode 100644 drivers/gpu/drm/msm/dpu_power_handle.c
>  delete mode 100644 drivers/gpu/drm/msm/dpu_power_handle.h
> 

<snip />

> @@ -1863,6 +1863,12 @@ static int dpu_init(struct platform_device *pdev, struct drm_device *dev)
>  		goto clk_rate_error;
>  	}
>  
> +	ret = dpu_power_resource_init(pdev, &dpu_kms->phandle);
> +	if (ret) {
> +		pr_err("dpu power resource init failed\n");
> +		goto power_init_fail;
> +	}
> +
>  	platform_set_drvdata(pdev, dpu_kms);
>  
>  	msm_kms_init(&dpu_kms->base, &kms_funcs);
> @@ -1876,6 +1882,7 @@ static int dpu_init(struct platform_device *pdev, struct drm_device *dev)
>  
>  	return ret;
>  
> +power_init_fail:

Nit: No need to add an empty label, just use clk_rate_error above.

With that fixed,

Reviewed-by: Sean Paul <seanpaul at chromium.org>


>  clk_rate_error:
>  	msm_dss_put_clk(mp->clk_config, mp->num_clk);
>  clk_get_error:

<snip />

-- 
Sean Paul, Software Engineer, Google / Chromium OS