[RFC 07/24] drm/lima: add mali 4xx GPU hardware regs
Qiang Yu
yuq825 at gmail.com
Fri May 18 03:16:40 UTC 2018
From: Lima Project Developers <dri-devel at lists.freedesktop.org>
Signed-off-by: Qiang Yu <yuq825 at gmail.com>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
drivers/gpu/drm/lima/lima_regs.h | 304 +++++++++++++++++++++++++++++++
1 file changed, 304 insertions(+)
create mode 100644 drivers/gpu/drm/lima/lima_regs.h
diff --git a/drivers/gpu/drm/lima/lima_regs.h b/drivers/gpu/drm/lima/lima_regs.h
new file mode 100644
index 000000000000..ea4a37d69b98
--- /dev/null
+++ b/drivers/gpu/drm/lima/lima_regs.h
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2010-2017 ARM Limited. All rights reserved.
+ * Copyright (C) 2017-2018 Lima Project
+ *
+ * This program is free software and is provided to you under
+ * the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, and any use by
+ * you of this program is subject to the terms of such GNU
+ * licence.
+ *
+ * A copy of the licence is included with the program, and
+ * can also be obtained from Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __LIMA_REGS_H__
+#define __LIMA_REGS_H__
+
+/* PMU regs */
+#define LIMA_PMU_POWER_UP 0x00
+#define LIMA_PMU_POWER_DOWN 0x04
+#define LIMA_PMU_POWER_GP0_MASK (1 << 0)
+#define LIMA_PMU_POWER_L2_MASK (1 << 1)
+#define LIMA_PMU_POWER_PP_MASK(i) (1 << (2 + i))
+
+/*
+ * On Mali450 each block automatically starts up its corresponding L2
+ * and the PPs are not fully independent controllable.
+ * Instead PP0, PP1-3 and PP4-7 can be turned on or off.
+ */
+#define LIMA450_PMU_POWER_PP0_MASK BIT(1)
+#define LIMA450_PMU_POWER_PP13_MASK BIT(2)
+#define LIMA450_PMU_POWER_PP47_MASK BIT(3)
+
+#define LIMA_PMU_STATUS 0x08
+#define LIMA_PMU_INT_MASK 0x0C
+#define LIMA_PMU_INT_RAWSTAT 0x10
+#define LIMA_PMU_INT_CLEAR 0x18
+#define LIMA_PMU_INT_CMD_MASK (1 << 0)
+#define LIMA_PMU_SW_DELAY 0x1C
+
+/* L2 cache regs */
+#define LIMA_L2_CACHE_SIZE 0x0004
+#define LIMA_L2_CACHE_STATUS 0x0008
+#define LIMA_L2_CACHE_STATUS_COMMAND_BUSY (1 << 0)
+#define LIMA_L2_CACHE_STATUS_DATA_BUSY (1 << 1)
+#define LIMA_L2_CACHE_COMMAND 0x0010
+#define LIMA_L2_CACHE_COMMAND_CLEAR_ALL (1 << 0)
+#define LIMA_L2_CACHE_CLEAR_PAGE 0x0014
+#define LIMA_L2_CACHE_MAX_READS 0x0018
+#define LIMA_L2_CACHE_ENABLE 0x001C
+#define LIMA_L2_CACHE_ENABLE_ACCESS (1 << 0)
+#define LIMA_L2_CACHE_ENABLE_READ_ALLOCATE (1 << 1)
+#define LIMA_L2_CACHE_PERFCNT_SRC0 0x0020
+#define LIMA_L2_CACHE_PERFCNT_VAL0 0x0024
+#define LIMA_L2_CACHE_PERFCNT_SRC1 0x0028
+#define LIMA_L2_CACHE_ERFCNT_VAL1 0x002C
+
+/* GP regs */
+#define LIMA_GP_VSCL_START_ADDR 0x00
+#define LIMA_GP_VSCL_END_ADDR 0x04
+#define LIMA_GP_PLBUCL_START_ADDR 0x08
+#define LIMA_GP_PLBUCL_END_ADDR 0x0c
+#define LIMA_GP_PLBU_ALLOC_START_ADDR 0x10
+#define LIMA_GP_PLBU_ALLOC_END_ADDR 0x14
+#define LIMA_GP_CMD 0x20
+#define LIMA_GP_CMD_START_VS (1 << 0)
+#define LIMA_GP_CMD_START_PLBU (1 << 1)
+#define LIMA_GP_CMD_UPDATE_PLBU_ALLOC (1 << 4)
+#define LIMA_GP_CMD_RESET (1 << 5)
+#define LIMA_GP_CMD_FORCE_HANG (1 << 6)
+#define LIMA_GP_CMD_STOP_BUS (1 << 9)
+#define LIMA_GP_CMD_SOFT_RESET (1 << 10)
+#define LIMA_GP_INT_RAWSTAT 0x24
+#define LIMA_GP_INT_CLEAR 0x28
+#define LIMA_GP_INT_MASK 0x2C
+#define LIMA_GP_INT_STAT 0x30
+#define LIMA_GP_IRQ_VS_END_CMD_LST (1 << 0)
+#define LIMA_GP_IRQ_PLBU_END_CMD_LST (1 << 1)
+#define LIMA_GP_IRQ_PLBU_OUT_OF_MEM (1 << 2)
+#define LIMA_GP_IRQ_VS_SEM_IRQ (1 << 3)
+#define LIMA_GP_IRQ_PLBU_SEM_IRQ (1 << 4)
+#define LIMA_GP_IRQ_HANG (1 << 5)
+#define LIMA_GP_IRQ_FORCE_HANG (1 << 6)
+#define LIMA_GP_IRQ_PERF_CNT_0_LIMIT (1 << 7)
+#define LIMA_GP_IRQ_PERF_CNT_1_LIMIT (1 << 8)
+#define LIMA_GP_IRQ_WRITE_BOUND_ERR (1 << 9)
+#define LIMA_GP_IRQ_SYNC_ERROR (1 << 10)
+#define LIMA_GP_IRQ_AXI_BUS_ERROR (1 << 11)
+#define LIMA_GP_IRQ_AXI_BUS_STOPPED (1 << 12)
+#define LIMA_GP_IRQ_VS_INVALID_CMD (1 << 13)
+#define LIMA_GP_IRQ_PLB_INVALID_CMD (1 << 14)
+#define LIMA_GP_IRQ_RESET_COMPLETED (1 << 19)
+#define LIMA_GP_IRQ_SEMAPHORE_UNDERFLOW (1 << 20)
+#define LIMA_GP_IRQ_SEMAPHORE_OVERFLOW (1 << 21)
+#define LIMA_GP_IRQ_PTR_ARRAY_OUT_OF_BOUNDS (1 << 22)
+#define LIMA_GP_WRITE_BOUND_LOW 0x34
+#define LIMA_GP_PERF_CNT_0_ENABLE 0x3C
+#define LIMA_GP_PERF_CNT_1_ENABLE 0x40
+#define LIMA_GP_PERF_CNT_0_SRC 0x44
+#define LIMA_GP_PERF_CNT_1_SRC 0x48
+#define LIMA_GP_PERF_CNT_0_VALUE 0x4C
+#define LIMA_GP_PERF_CNT_1_VALUE 0x50
+#define LIMA_GP_PERF_CNT_0_LIMIT 0x54
+#define LIMA_GP_STATUS 0x68
+#define LIMA_GP_STATUS_VS_ACTIVE (1 << 1)
+#define LIMA_GP_STATUS_BUS_STOPPED (1 << 2)
+#define LIMA_GP_STATUS_PLBU_ACTIVE (1 << 3)
+#define LIMA_GP_STATUS_BUS_ERROR (1 << 6)
+#define LIMA_GP_STATUS_WRITE_BOUND_ERR (1 << 8)
+#define LIMA_GP_VERSION 0x6C
+#define LIMA_GP_VSCL_START_ADDR_READ 0x80
+#define LIMA_GP_PLBCL_START_ADDR_READ 0x84
+#define LIMA_GP_CONTR_AXI_BUS_ERROR_STAT 0x94
+
+#define LIMA_GP_IRQ_MASK_ALL \
+ ( \
+ LIMA_GP_IRQ_VS_END_CMD_LST | \
+ LIMA_GP_IRQ_PLBU_END_CMD_LST | \
+ LIMA_GP_IRQ_PLBU_OUT_OF_MEM | \
+ LIMA_GP_IRQ_VS_SEM_IRQ | \
+ LIMA_GP_IRQ_PLBU_SEM_IRQ | \
+ LIMA_GP_IRQ_HANG | \
+ LIMA_GP_IRQ_FORCE_HANG | \
+ LIMA_GP_IRQ_PERF_CNT_0_LIMIT | \
+ LIMA_GP_IRQ_PERF_CNT_1_LIMIT | \
+ LIMA_GP_IRQ_WRITE_BOUND_ERR | \
+ LIMA_GP_IRQ_SYNC_ERROR | \
+ LIMA_GP_IRQ_AXI_BUS_ERROR | \
+ LIMA_GP_IRQ_AXI_BUS_STOPPED | \
+ LIMA_GP_IRQ_VS_INVALID_CMD | \
+ LIMA_GP_IRQ_PLB_INVALID_CMD | \
+ LIMA_GP_IRQ_RESET_COMPLETED | \
+ LIMA_GP_IRQ_SEMAPHORE_UNDERFLOW | \
+ LIMA_GP_IRQ_SEMAPHORE_OVERFLOW | \
+ LIMA_GP_IRQ_PTR_ARRAY_OUT_OF_BOUNDS)
+
+#define LIMA_GP_IRQ_MASK_ERROR \
+ ( \
+ LIMA_GP_IRQ_PLBU_OUT_OF_MEM | \
+ LIMA_GP_IRQ_FORCE_HANG | \
+ LIMA_GP_IRQ_WRITE_BOUND_ERR | \
+ LIMA_GP_IRQ_SYNC_ERROR | \
+ LIMA_GP_IRQ_AXI_BUS_ERROR | \
+ LIMA_GP_IRQ_VS_INVALID_CMD | \
+ LIMA_GP_IRQ_PLB_INVALID_CMD | \
+ LIMA_GP_IRQ_SEMAPHORE_UNDERFLOW | \
+ LIMA_GP_IRQ_SEMAPHORE_OVERFLOW | \
+ LIMA_GP_IRQ_PTR_ARRAY_OUT_OF_BOUNDS)
+
+#define LIMA_GP_IRQ_MASK_USED \
+ ( \
+ LIMA_GP_IRQ_VS_END_CMD_LST | \
+ LIMA_GP_IRQ_PLBU_END_CMD_LST | \
+ LIMA_GP_IRQ_MASK_ERROR)
+
+/* PP regs */
+#define LIMA_PP_FRAME 0x0000
+#define LIMA_PP_RSW 0x0004
+#define LIMA_PP_STACK 0x0030
+#define LIMA_PP_STACK_SIZE 0x0034
+#define LIMA_PP_ORIGIN_OFFSET_X 0x0040
+#define LIMA_PP_WB(i) (0x0100 * (i + 1))
+#define LIMA_PP_WB_SOURCE_SELECT 0x0000
+#define LIMA_PP_WB_SOURCE_ADDR 0x0004
+
+#define LIMA_PP_VERSION 0x1000
+#define LIMA_PP_CURRENT_REND_LIST_ADDR 0x1004
+#define LIMA_PP_STATUS 0x1008
+#define LIMA_PP_STATUS_RENDERING_ACTIVE (1 << 0)
+#define LIMA_PP_STATUS_BUS_STOPPED (1 << 4)
+#define LIMA_PP_CTRL 0x100c
+#define LIMA_PP_CTRL_STOP_BUS (1 << 0)
+#define LIMA_PP_CTRL_FLUSH_CACHES (1 << 3)
+#define LIMA_PP_CTRL_FORCE_RESET (1 << 5)
+#define LIMA_PP_CTRL_START_RENDERING (1 << 6)
+#define LIMA_PP_CTRL_SOFT_RESET (1 << 7)
+#define LIMA_PP_INT_RAWSTAT 0x1020
+#define LIMA_PP_INT_CLEAR 0x1024
+#define LIMA_PP_INT_MASK 0x1028
+#define LIMA_PP_INT_STATUS 0x102c
+#define LIMA_PP_IRQ_END_OF_FRAME (1 << 0)
+#define LIMA_PP_IRQ_END_OF_TILE (1 << 1)
+#define LIMA_PP_IRQ_HANG (1 << 2)
+#define LIMA_PP_IRQ_FORCE_HANG (1 << 3)
+#define LIMA_PP_IRQ_BUS_ERROR (1 << 4)
+#define LIMA_PP_IRQ_BUS_STOP (1 << 5)
+#define LIMA_PP_IRQ_CNT_0_LIMIT (1 << 6)
+#define LIMA_PP_IRQ_CNT_1_LIMIT (1 << 7)
+#define LIMA_PP_IRQ_WRITE_BOUNDARY_ERROR (1 << 8)
+#define LIMA_PP_IRQ_INVALID_PLIST_COMMAND (1 << 9)
+#define LIMA_PP_IRQ_CALL_STACK_UNDERFLOW (1 << 10)
+#define LIMA_PP_IRQ_CALL_STACK_OVERFLOW (1 << 11)
+#define LIMA_PP_IRQ_RESET_COMPLETED (1 << 12)
+#define LIMA_PP_WRITE_BOUNDARY_LOW 0x1044
+#define LIMA_PP_BUS_ERROR_STATUS 0x1050
+#define LIMA_PP_PERF_CNT_0_ENABLE 0x1080
+#define LIMA_PP_PERF_CNT_0_SRC 0x1084
+#define LIMA_PP_PERF_CNT_0_LIMIT 0x1088
+#define LIMA_PP_PERF_CNT_0_VALUE 0x108c
+#define LIMA_PP_PERF_CNT_1_ENABLE 0x10a0
+#define LIMA_PP_PERF_CNT_1_SRC 0x10a4
+#define LIMA_PP_PERF_CNT_1_LIMIT 0x10a8
+#define LIMA_PP_PERF_CNT_1_VALUE 0x10ac
+#define LIMA_PP_PERFMON_CONTR 0x10b0
+#define LIMA_PP_PERFMON_BASE 0x10b4
+
+#define LIMA_PP_IRQ_MASK_ALL \
+ ( \
+ LIMA_PP_IRQ_END_OF_FRAME | \
+ LIMA_PP_IRQ_END_OF_TILE | \
+ LIMA_PP_IRQ_HANG | \
+ LIMA_PP_IRQ_FORCE_HANG | \
+ LIMA_PP_IRQ_BUS_ERROR | \
+ LIMA_PP_IRQ_BUS_STOP | \
+ LIMA_PP_IRQ_CNT_0_LIMIT | \
+ LIMA_PP_IRQ_CNT_1_LIMIT | \
+ LIMA_PP_IRQ_WRITE_BOUNDARY_ERROR | \
+ LIMA_PP_IRQ_INVALID_PLIST_COMMAND | \
+ LIMA_PP_IRQ_CALL_STACK_UNDERFLOW | \
+ LIMA_PP_IRQ_CALL_STACK_OVERFLOW | \
+ LIMA_PP_IRQ_RESET_COMPLETED)
+
+#define LIMA_PP_IRQ_MASK_ERROR \
+ ( \
+ LIMA_PP_IRQ_FORCE_HANG | \
+ LIMA_PP_IRQ_BUS_ERROR | \
+ LIMA_PP_IRQ_WRITE_BOUNDARY_ERROR | \
+ LIMA_PP_IRQ_INVALID_PLIST_COMMAND | \
+ LIMA_PP_IRQ_CALL_STACK_UNDERFLOW | \
+ LIMA_PP_IRQ_CALL_STACK_OVERFLOW)
+
+#define LIMA_PP_IRQ_MASK_USED \
+ ( \
+ LIMA_PP_IRQ_END_OF_FRAME | \
+ LIMA_PP_IRQ_MASK_ERROR)
+
+/* MMU regs */
+#define LIMA_MMU_DTE_ADDR 0x0000
+#define LIMA_MMU_STATUS 0x0004
+#define LIMA_MMU_STATUS_PAGING_ENABLED (1 << 0)
+#define LIMA_MMU_STATUS_PAGE_FAULT_ACTIVE (1 << 1)
+#define LIMA_MMU_STATUS_STALL_ACTIVE (1 << 2)
+#define LIMA_MMU_STATUS_IDLE (1 << 3)
+#define LIMA_MMU_STATUS_REPLAY_BUFFER_EMPTY (1 << 4)
+#define LIMA_MMU_STATUS_PAGE_FAULT_IS_WRITE (1 << 5)
+#define LIMA_MMU_STATUS_BUS_ID(x) ((x >> 6) & 0x1F)
+#define LIMA_MMU_COMMAND 0x0008
+#define LIMA_MMU_COMMAND_ENABLE_PAGING 0x00
+#define LIMA_MMU_COMMAND_DISABLE_PAGING 0x01
+#define LIMA_MMU_COMMAND_ENABLE_STALL 0x02
+#define LIMA_MMU_COMMAND_DISABLE_STALL 0x03
+#define LIMA_MMU_COMMAND_ZAP_CACHE 0x04
+#define LIMA_MMU_COMMAND_PAGE_FAULT_DONE 0x05
+#define LIMA_MMU_COMMAND_HARD_RESET 0x06
+#define LIMA_MMU_PAGE_FAULT_ADDR 0x000C
+#define LIMA_MMU_ZAP_ONE_LINE 0x0010
+#define LIMA_MMU_INT_RAWSTAT 0x0014
+#define LIMA_MMU_INT_CLEAR 0x0018
+#define LIMA_MMU_INT_MASK 0x001C
+#define LIMA_MMU_INT_PAGE_FAULT 0x01
+#define LIMA_MMU_INT_READ_BUS_ERROR 0x02
+#define LIMA_MMU_INT_STATUS 0x0020
+
+#define LIMA_VM_FLAG_PRESENT (1 << 0)
+#define LIMA_VM_FLAG_READ_PERMISSION (1 << 1)
+#define LIMA_VM_FLAG_WRITE_PERMISSION (1 << 2)
+#define LIMA_VM_FLAG_OVERRIDE_CACHE (1 << 3)
+#define LIMA_VM_FLAG_WRITE_CACHEABLE (1 << 4)
+#define LIMA_VM_FLAG_WRITE_ALLOCATE (1 << 5)
+#define LIMA_VM_FLAG_WRITE_BUFFERABLE (1 << 6)
+#define LIMA_VM_FLAG_READ_CACHEABLE (1 << 7)
+#define LIMA_VM_FLAG_READ_ALLOCATE (1 << 8)
+#define LIMA_VM_FLAG_MASK 0x1FF
+
+#define LIMA_VM_FLAGS_CACHE ( \
+ LIMA_VM_FLAG_PRESENT | \
+ LIMA_VM_FLAG_READ_PERMISSION | \
+ LIMA_VM_FLAG_WRITE_PERMISSION | \
+ LIMA_VM_FLAG_OVERRIDE_CACHE | \
+ LIMA_VM_FLAG_WRITE_CACHEABLE | \
+ LIMA_VM_FLAG_WRITE_BUFFERABLE | \
+ LIMA_VM_FLAG_READ_CACHEABLE | \
+ LIMA_VM_FLAG_READ_ALLOCATE )
+
+#define LIMA_VM_FLAGS_UNCACHE ( \
+ LIMA_VM_FLAG_PRESENT | \
+ LIMA_VM_FLAG_READ_PERMISSION | \
+ LIMA_VM_FLAG_WRITE_PERMISSION )
+
+/* DLBU regs */
+#define LIMA_DLBU_MASTER_TLLIST_PHYS_ADDR 0x0000
+#define LIMA_DLBU_MASTER_TLLIST_VADDR 0x0004
+#define LIMA_DLBU_TLLIST_VBASEADDR 0x0008
+#define LIMA_DLBU_FB_DIM 0x000C
+#define LIMA_DLBU_TLLIST_CONF 0x0010
+#define LIMA_DLBU_START_TILE_POS 0x0014
+#define LIMA_DLBU_PP_ENABLE_MASK 0x0018
+
+/* BCAST regs */
+#define LIMA_BCAST_BROADCAST_MASK 0x0
+#define LIMA_BCAST_INTERRUPT_MASK 0x4
+
+#endif
--
2.17.0
More information about the dri-devel
mailing list