[PATCH v4 10/11] media: vsp1: Support Interlaced display pipelines
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu May 24 12:51:46 UTC 2018
Hi Kieran,
Thank you for the patch.
On Thursday, 3 May 2018 16:36:21 EEST Kieran Bingham wrote:
> Calculate the top and bottom fields for the interlaced frames and
> utilise the extended display list command feature to implement the
> auto-field operations. This allows the DU to update the VSP2 registers
> dynamically based upon the currently processing field.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> ---
> v3:
> - Pass DL through partition calls to allow autocmd's to be retrieved
> - Document interlaced field in struct vsp1_du_atomic_config
>
> v2:
> - fix erroneous BIT value which enabled interlaced
> - fix field handling at frame_end interrupt
> ---
> drivers/media/platform/vsp1/vsp1_dl.c | 10 ++++-
> drivers/media/platform/vsp1/vsp1_drm.c | 11 ++++-
> drivers/media/platform/vsp1/vsp1_regs.h | 1 +-
> drivers/media/platform/vsp1/vsp1_rpf.c | 71 ++++++++++++++++++++++++--
> drivers/media/platform/vsp1/vsp1_rwpf.h | 1 +-
> include/media/vsp1.h | 2 +-
> 6 files changed, 93 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_dl.c
> b/drivers/media/platform/vsp1/vsp1_dl.c index d33ae5f125bd..bbe9f3006f71
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_dl.c
> +++ b/drivers/media/platform/vsp1/vsp1_dl.c
> @@ -906,6 +906,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool
> internal) */
> unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
> {
> + struct vsp1_device *vsp1 = dlm->vsp1;
> + u32 status = vsp1_read(vsp1, VI6_STATUS);
> unsigned int flags = 0;
>
> spin_lock(&dlm->lock);
> @@ -931,6 +933,14 @@ unsigned int vsp1_dlm_irq_frame_end(struct
> vsp1_dl_manager *dlm) goto done;
>
> /*
> + * Progressive streams report only TOP fields. If we have a BOTTOM
> + * field, we are interlaced, and expect the frame to complete on the
> + * next frame end interrupt.
> + */
> + if (status & VI6_STATUS_FLD_STD(dlm->index))
> + goto done;
> +
> + /*
> * The device starts processing the queued display list right after the
> * frame end interrupt. The display list thus becomes active.
> */
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> b/drivers/media/platform/vsp1/vsp1_drm.c index 2c3db8b8adce..cc29c9d96bb7
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -811,6 +811,17 @@ int vsp1_du_atomic_update(struct device *dev, unsigned
> int pipe_index, return -EINVAL;
> }
>
> + if (!(vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) && cfg->interlaced) {
Nitpicking, writing the condition as
if (cfg->interlaced && !(vsp1_feature(vsp1, VSP1_HAS_EXT_DL)))
would match the comment better. You can also drop the parentheses around the
vsp1_feature() call.
> + /*
> + * Interlaced support requires extended display lists to
> + * provide the auto-fld feature with the DU.
> + */
> + dev_dbg(vsp1->dev, "Interlaced unsupported on this output\n");
Could we catch this in the DU driver to fail atomic test ?
> + return -EINVAL;
> + }
> +
> + rpf->interlaced = cfg->interlaced;
> +
> rpf->fmtinfo = fmtinfo;
> rpf->format.num_planes = fmtinfo->planes;
> rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
> diff --git a/drivers/media/platform/vsp1/vsp1_regs.h
> b/drivers/media/platform/vsp1/vsp1_regs.h index d054767570c1..a2ac65cc5155
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_regs.h
> +++ b/drivers/media/platform/vsp1/vsp1_regs.h
> @@ -28,6 +28,7 @@
> #define VI6_SRESET_SRTS(n) (1 << (n))
>
> #define VI6_STATUS 0x0038
> +#define VI6_STATUS_FLD_STD(n) (1 << ((n) + 28))
> #define VI6_STATUS_SYS_ACT(n) (1 << ((n) + 8))
>
> #define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12)
> diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c
> b/drivers/media/platform/vsp1/vsp1_rpf.c index 8fae7c485642..511b2e127820
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_rpf.c
> +++ b/drivers/media/platform/vsp1/vsp1_rpf.c
> @@ -20,6 +20,20 @@
> #define RPF_MAX_WIDTH 8190
> #define RPF_MAX_HEIGHT 8190
>
> +/* Pre extended display list command data structure */
> +struct vsp1_extcmd_auto_fld_body {
> + u32 top_y0;
> + u32 bottom_y0;
> + u32 top_c0;
> + u32 bottom_c0;
> + u32 top_c1;
> + u32 bottom_c1;
> + u32 reserved0;
> + u32 reserved1;
> +} __packed;
> +
> +#define VSP1_DL_EXT_AUTOFLD_INT BIT(0)
Should the bit definition be moved to vsp1_regs.h ?
> /* ------------------------------------------------------------------------
> * Device Access
> */
> @@ -64,6 +78,14 @@ static void rpf_configure_stream(struct vsp1_entity
> *entity, pstride |= format->plane_fmt[1].bytesperline
> << VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
>
> + /*
> + * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole
> + * of pstride by 2 is conveniently OK here as we are multiplying both
> + * values.
> + */
> + if (rpf->interlaced)
> + pstride *= 2;
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride);
>
> /* Format */
> @@ -100,6 +122,9 @@ static void rpf_configure_stream(struct vsp1_entity
> *entity, top = compose->top;
> }
>
> + if (rpf->interlaced)
> + top /= 2;
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC,
> (left << VI6_RPF_LOC_HCOORD_SHIFT) |
> (top << VI6_RPF_LOC_VCOORD_SHIFT));
> @@ -169,6 +194,31 @@ static void rpf_configure_stream(struct vsp1_entity
> *entity,
>
> }
>
> +static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf,
> + struct vsp1_dl_ext_cmd *cmd)
> +{
> + const struct v4l2_pix_format_mplane *format = &rpf->format;
> + struct vsp1_extcmd_auto_fld_body *auto_fld = cmd->data;
> + u32 offset_y, offset_c;
> +
> + /* Re-index our auto_fld to match the current RPF */
s/RPF/RPF./
> + auto_fld = &auto_fld[rpf->entity.index];
> +
> + auto_fld->top_y0 = rpf->mem.addr[0];
> + auto_fld->top_c0 = rpf->mem.addr[1];
> + auto_fld->top_c1 = rpf->mem.addr[2];
> +
> + offset_y = format->plane_fmt[0].bytesperline;
> + offset_c = format->plane_fmt[1].bytesperline;
> +
> + auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y;
> + auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c;
> + auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c;
> +
> + cmd->flags |= VSP1_DL_EXT_AUTOFLD_INT;
> + cmd->flags |= BIT(16 + rpf->entity.index);
Do you expect some flags to already be set ? If not, couldn't we assign the
value to the field instead of OR'ing it ?
> +}
> +
> static void rpf_configure_frame(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> struct vsp1_dl_list *dl,
> @@ -192,6 +242,7 @@ static void rpf_configure_partition(struct vsp1_entity
> *entity, struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
> struct vsp1_rwpf_memory mem = rpf->mem;
> struct vsp1_device *vsp1 = rpf->entity.vsp1;
> + struct vsp1_dl_ext_cmd *cmd;
> const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
> const struct v4l2_pix_format_mplane *format = &rpf->format;
> struct v4l2_rect crop;
> @@ -220,6 +271,11 @@ static void rpf_configure_partition(struct vsp1_entity
> *entity, crop.left += pipe->partition->rpf.left;
> }
>
> + if (rpf->interlaced) {
> + crop.height = round_down(crop.height / 2, fmtinfo->vsub);
> + crop.top = round_down(crop.top / 2, fmtinfo->vsub);
> + }
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE,
> (crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
> (crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
> @@ -248,9 +304,18 @@ static void rpf_configure_partition(struct vsp1_entity
> *entity, fmtinfo->swap_uv)
> swap(mem.addr[1], mem.addr[2]);
>
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
> + /*
> + * Interlaced pipelines will use the extended pre-cmd to process
> + * SRCM_ADDR_{Y,C0,C1}
> + */
> + if (rpf->interlaced) {
> + cmd = vsp1_dlm_get_autofld_cmd(dl);
How about moving this call to vsp1_rpf_configure_autofld() ?
> + vsp1_rpf_configure_autofld(rpf, cmd);
> + } else {
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
> + }
> }
>
> static void rpf_partition(struct vsp1_entity *entity,
> diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.h
> b/drivers/media/platform/vsp1/vsp1_rwpf.h index 70742ecf766f..8d6e42f27908
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_rwpf.h
> +++ b/drivers/media/platform/vsp1/vsp1_rwpf.h
> @@ -42,6 +42,7 @@ struct vsp1_rwpf {
> struct v4l2_pix_format_mplane format;
> const struct vsp1_format_info *fmtinfo;
> unsigned int brx_input;
> + bool interlaced;
Shouldn't this be stored in the pipeline instead ? Interlacing is a property
of the whole pipeline, not of each input individually.
> unsigned int alpha;
>
> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> index 678c24de1ac6..c10883f30980 100644
> --- a/include/media/vsp1.h
> +++ b/include/media/vsp1.h
> @@ -50,6 +50,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int
> pipe_index,
> * @dst: destination rectangle on the display (integer coordinates)
> * @alpha: alpha value (0: fully transparent, 255: fully opaque)
> * @zpos: Z position of the plane (from 0 to number of planes minus 1)
> + * @interlaced: true for interlaced pipelines
> */
> struct vsp1_du_atomic_config {
> u32 pixelformat;
> @@ -59,6 +60,7 @@ struct vsp1_du_atomic_config {
> struct v4l2_rect dst;
> unsigned int alpha;
> unsigned int zpos;
> + bool interlaced;
For the same reason shouldn't the interlaced flag be moved to
vsp1_du_lif_config ?
> };
>
> /**
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list