[RFC PATCH v2 1/2] drm: Add generic colorkey properties
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Sat May 26 16:16:54 UTC 2018
Hi Dimitri,
Thank you for the patch.
I'll review this in details, but as this patch is based on the "[PATCH/RFC
1/4] drm: Add colorkey properties" patch I've submitted, please retain the
authorship, both in the Signed-off-by line, and in the patch author in git.
On Saturday, 26 May 2018 18:56:22 EEST Dmitry Osipenko wrote:
> Color keying is the action of replacing pixels matching a given color
> (or range of colors) with transparent pixels in an overlay when
> performing blitting. Depending on the hardware capabilities, the
> matching pixel can either become fully transparent or gain adjustment
> of the pixels component values.
>
> Color keying is found in a large number of devices whose capabilities
> often differ, but they still have enough common features in range to
> standardize color key properties. This commit adds nine generic DRM plane
> properties related to the color keying to cover various HW capabilities.
>
> This patch is based on the initial work done by Laurent Pinchart, most of
> credits for this patch goes to him.
>
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 36 ++++++
> drivers/gpu/drm/drm_blend.c | 229 +++++++++++++++++++++++++++++++++++
> include/drm/drm_blend.h | 3 +
> include/drm/drm_plane.h | 77 ++++++++++++
> 4 files changed, 345 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 895741e9cd7d..5b808cb68654 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -799,6 +799,24 @@ static int drm_atomic_plane_set_property(struct
> drm_plane *plane, state->rotation = val;
> } else if (property == plane->zpos_property) {
> state->zpos = val;
> + } else if (property == plane->colorkey.mode_property) {
> + state->colorkey.mode = val;
> + } else if (property == plane->colorkey.min_property) {
> + state->colorkey.min = val;
> + } else if (property == plane->colorkey.max_property) {
> + state->colorkey.max = val;
> + } else if (property == plane->colorkey.format_property) {
> + state->colorkey.format = val;
> + } else if (property == plane->colorkey.mask_property) {
> + state->colorkey.mask = val;
> + } else if (property == plane->colorkey.inverted_match_property) {
> + state->colorkey.inverted_match = val;
> + } else if (property == plane->colorkey.replacement_mask_property) {
> + state->colorkey.replacement_mask = val;
> + } else if (property == plane->colorkey.replacement_value_property) {
> + state->colorkey.replacement_value = val;
> + } else if (property == plane->colorkey.replacement_format_property) {
> + state->colorkey.replacement_format = val;
> } else if (property == plane->color_encoding_property) {
> state->color_encoding = val;
> } else if (property == plane->color_range_property) {
> @@ -864,6 +882,24 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
> *val = state->rotation;
> } else if (property == plane->zpos_property) {
> *val = state->zpos;
> + } else if (property == plane->colorkey.mode_property) {
> + *val = state->colorkey.mode;
> + } else if (property == plane->colorkey.min_property) {
> + *val = state->colorkey.min;
> + } else if (property == plane->colorkey.max_property) {
> + *val = state->colorkey.max;
> + } else if (property == plane->colorkey.format_property) {
> + *val = state->colorkey.format;
> + } else if (property == plane->colorkey.mask_property) {
> + *val = state->colorkey.mask;
> + } else if (property == plane->colorkey.inverted_match_property) {
> + *val = state->colorkey.inverted_match;
> + } else if (property == plane->colorkey.replacement_mask_property) {
> + *val = state->colorkey.replacement_mask;
> + } else if (property == plane->colorkey.replacement_value_property) {
> + *val = state->colorkey.replacement_value;
> + } else if (property == plane->colorkey.replacement_format_property) {
> + *val = state->colorkey.replacement_format;
> } else if (property == plane->color_encoding_property) {
> *val = state->color_encoding;
> } else if (property == plane->color_range_property) {
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index a16a74d7e15e..05e5632ce375 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -107,6 +107,11 @@
> * planes. Without this property the primary plane is always below the
> cursor * plane, and ordering between all other planes is undefined.
> *
> + * colorkey:
> + * Color keying is set up with drm_plane_create_colorkey_properties().
> + * It adds support for replacing a range of colors with a transparent
> + * color in the plane.
> + *
> * Note that all the property extensions described here apply either to the
> * plane or the CRTC (e.g. for the background color, which currently is not
> * exposed and assumed to be black).
> @@ -448,3 +453,227 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
> return 0;
> }
> EXPORT_SYMBOL(drm_atomic_normalize_zpos);
> +
> +static const char * const plane_colorkey_mode_name[] = {
> + [DRM_PLANE_COLORKEY_MODE_DISABLED] = "disabled",
> + [DRM_PLANE_COLORKEY_MODE_SRC] = "src-match-src-replace",
> + [DRM_PLANE_COLORKEY_MODE_DST] = "dst-match-src-replace",
> +};
> +
> +/**
> + * drm_plane_create_colorkey_properties - create colorkey properties
> + * @plane: drm plane
> + * @supported_modes: bitmask of supported color keying modes
> + *
> + * This function creates the generic color keying properties and attach
> them to + * the plane to enable color keying control for blending
> operations. + *
> + * Color keying is controlled through nine properties:
> + *
> + * colorkey.mode:
> + * The mode is an enumerated property that controls how color keying
> + * operates. The "disabled" mode that disables color keying and is
> + * very likely to exist if color keying is supported, it should be the
> + * default mode.
> + *
> + * colorkey.min, colorkey.max:
> + * These two properties specify the colors that are treated as the color
> + * key. Pixel whose value is in the [min, max] range is the color key
> + * matching pixel. The minimum and maximum values are expressed as a
> + * 64-bit integer in AXYZ16161616 format, where A is the alpha value and
> + * X, Y and Z correspond to the color components of the colorkey.format.
> + * In most cases XYZ will be either RGB or YUV.
> + *
> + * When a single color key is desired instead of a range, userspace shall
> + * set the min and max properties to the same value.
> + *
> + * Drivers return an error from their plane atomic check if range can't be
> + * handled.
> + *
> + * colorkey.format:
> + * This property specifies the pixel format for the colorkey.min / max
> + * properties. The format is given in a form of DRM fourcc code.
> + *
> + * Drivers return an error from their plane atomic check if pixel format
> + * is unsupported.
> + *
> + * colorkey.mask:
> + * This property specifies the pixel components mask. Unmasked pixel
> + * components are not participating in the matching. This mask value is
> + * applied to colorkey.min / max values. The mask value is given in a
> + * form of DRM fourcc code corresponding to the colorkey.format property.
> + *
> + * For example: userspace shall set the colorkey.mask to 0x0000ff00
> + * to match only the green component if colorkey.format is set to
> + * DRM_FORMAT_XRGB8888.
> + *
> + * Drivers return an error from their plane atomic check if mask value
> + * can't be handled.
> + *
> + * colorkey.inverted-match:
> + * This property specifies whether the matching min-max range should
> + * be inverted, i.e. pixels outside of the given color range become
> + * the color key match.
> + *
> + * Drivers return an error from their plane atomic check if inversion
> + * mode can't be handled.
> + *
> + * colorkey.replacement-value:
> + * This property specifies the color value that replaces pixels matching
> + * the color key. The value is expressed in AXYZ16161616 format, where A
> + * is the alpha value and X, Y and Z correspond to the color components
> + * of the colorkey.replacement-format.
> + *
> + * Drivers return an error from their plane atomic check if replacement
> + * value can't be handled.
> + *
> + * colorkey.replacement-format:
> + * This property specifies the pixel format for the
> + * colorkey.replacement-value property. The format is given in a form of
> + * DRM fourcc code.
> + *
> + * Drivers return an error from their plane atomic check if replacement
> + * pixel format is unsupported.
> + *
> + * colorkey.replacement-mask:
> + * This property specifies the pixel components mask that defines
> + * what components of the colorkey.replacement-value will participate in
> + * replacement of the pixels color. Unmasked pixel components are not
> + * participating in the replacement. The mask value is given in a form of
> + * DRM fourcc code corresponding to the colorkey.replacement-format
> + * property.
> + *
> + * For example: userspace shall set the colorkey.replacement-mask to
> + * 0x0000ff00 to replace only the green component if
> + * colorkey.replacement-format is set to DRM_FORMAT_XRGB8888.
> + *
> + * Userspace shall set colorkey.replacement-mask to 0 to disable the color
> + * replacement. In this case matching pixels become transparent.
> + *
> + * Drivers return an error from their plane atomic check if replacement
> + * mask value can't be handled.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_plane_create_colorkey_properties(struct drm_plane *plane,
> + u32 supported_modes)
> +{
> + struct drm_prop_enum_list modes_list[DRM_PLANE_COLORKEY_MODES_NUM];
> + struct drm_property *replacement_format_prop;
> + struct drm_property *replacement_value_prop;
> + struct drm_property *replacement_mask_prop;
> + struct drm_property *inverted_match_prop;
> + struct drm_property *format_prop;
> + struct drm_property *mask_prop;
> + struct drm_property *mode_prop;
> + struct drm_property *min_prop;
> + struct drm_property *max_prop;
> + unsigned int modes_num = 0;
> + unsigned int i;
> +
> + /* at least two modes should be supported */
> + if (!supported_modes)
> + return -EINVAL;
> +
> + /* modes are driver-specific, build the list of supported modes */
> + for (i = 0; i < DRM_PLANE_COLORKEY_MODES_NUM; i++) {
> + if (!(supported_modes & BIT(i)))
> + continue;
> +
> + modes_list[modes_num].name = plane_colorkey_mode_name[i];
> + modes_list[modes_num].type = i;
> + modes_num++;
> + }
> +
> + mode_prop = drm_property_create_enum(plane->dev, 0, "colorkey.mode",
> + modes_list, modes_num);
> + if (!mode_prop)
> + return -ENOMEM;
> +
> + mask_prop = drm_property_create_range(plane->dev, 0, "colorkey.mask",
> + 0, U64_MAX);
> + if (!mask_prop)
> + goto err_destroy_mode_prop;
> +
> + min_prop = drm_property_create_range(plane->dev, 0, "colorkey.min",
> + 0, U64_MAX);
> + if (!min_prop)
> + goto err_destroy_mask_prop;
> +
> + max_prop = drm_property_create_range(plane->dev, 0, "colorkey.max",
> + 0, U64_MAX);
> + if (!max_prop)
> + goto err_destroy_min_prop;
> +
> + format_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.format",
> + 0, U32_MAX);
> + if (!format_prop)
> + goto err_destroy_max_prop;
> +
> + inverted_match_prop = drm_property_create_bool(plane->dev, 0,
> + "colorkey.inverted-match");
> + if (!inverted_match_prop)
> + goto err_destroy_format_prop;
> +
> + replacement_mask_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.replacement-mask",
> + 0, U64_MAX);
> + if (!replacement_mask_prop)
> + goto err_destroy_inverted_match_prop;
> +
> + replacement_value_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.replacement-value",
> + 0, U64_MAX);
> + if (!replacement_value_prop)
> + goto err_destroy_replacement_mask_prop;
> +
> + replacement_format_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.replacement-format",
> + 0, U64_MAX);
> + if (!replacement_format_prop)
> + goto err_destroy_replacement_value_prop;
> +
> + drm_object_attach_property(&plane->base, min_prop, 0);
> + drm_object_attach_property(&plane->base, max_prop, 0);
> + drm_object_attach_property(&plane->base, mode_prop, 0);
> + drm_object_attach_property(&plane->base, mask_prop, 0);
> + drm_object_attach_property(&plane->base, format_prop, 0);
> + drm_object_attach_property(&plane->base, inverted_match_prop, 0);
> + drm_object_attach_property(&plane->base, replacement_mask_prop, 0);
> + drm_object_attach_property(&plane->base, replacement_value_prop, 0);
> + drm_object_attach_property(&plane->base, replacement_format_prop, 0);
> +
> + plane->colorkey.min_property = min_prop;
> + plane->colorkey.max_property = max_prop;
> + plane->colorkey.mode_property = mode_prop;
> + plane->colorkey.mask_property = mask_prop;
> + plane->colorkey.format_property = format_prop;
> + plane->colorkey.inverted_match_property = inverted_match_prop;
> + plane->colorkey.replacement_mask_property = replacement_mask_prop;
> + plane->colorkey.replacement_value_property = replacement_value_prop;
> + plane->colorkey.replacement_format_property = replacement_format_prop;
> +
> + return 0;
> +
> +err_destroy_replacement_value_prop:
> + drm_property_destroy(plane->dev, replacement_value_prop);
> +err_destroy_replacement_mask_prop:
> + drm_property_destroy(plane->dev, replacement_mask_prop);
> +err_destroy_inverted_match_prop:
> + drm_property_destroy(plane->dev, inverted_match_prop);
> +err_destroy_format_prop:
> + drm_property_destroy(plane->dev, format_prop);
> +err_destroy_max_prop:
> + drm_property_destroy(plane->dev, max_prop);
> +err_destroy_min_prop:
> + drm_property_destroy(plane->dev, min_prop);
> +err_destroy_mask_prop:
> + drm_property_destroy(plane->dev, mask_prop);
> +err_destroy_mode_prop:
> + drm_property_destroy(plane->dev, mode_prop);
> +
> + return -ENOMEM;
> +}
> +EXPORT_SYMBOL(drm_plane_create_colorkey_properties);
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index 330c561c4c11..8e80d33b643e 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -52,4 +52,7 @@ int drm_plane_create_zpos_immutable_property(struct
> drm_plane *plane, unsigned int zpos);
> int drm_atomic_normalize_zpos(struct drm_device *dev,
> struct drm_atomic_state *state);
> +
> +int drm_plane_create_colorkey_properties(struct drm_plane *plane,
> + u32 supported_modes);
> #endif
> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> index 26fa50c2a50e..ff7f5ebe2b79 100644
> --- a/include/drm/drm_plane.h
> +++ b/include/drm/drm_plane.h
> @@ -32,6 +32,42 @@ struct drm_crtc;
> struct drm_printer;
> struct drm_modeset_acquire_ctx;
>
> +/**
> + * enum drm_plane_colorkey_mode - uapi plane colorkey mode enumeration
> + */
> +enum drm_plane_colorkey_mode {
> + /**
> + * @DRM_PLANE_COLORKEY_MODE_DISABLED:
> + *
> + * No color matching performed in this mode. This is the default
> + * common mode.
> + */
> + DRM_PLANE_COLORKEY_MODE_DISABLED,
> +
> + /**
> + * @DRM_PLANE_COLORKEY_MODE_SRC:
> + *
> + * In this mode color matching is performed with the pixels of
> + * the given plane and the matched pixels are fully (or partially)
> + * replaced with the replacement color or become completely
> + * transparent.
> + */
> + DRM_PLANE_COLORKEY_MODE_SRC,
> +
> + /**
> + * @DRM_PLANE_COLORKEY_MODE_DST:
> + *
> + * In this mode color matching is performed with the pixels of the
> + * planes z-positioned under the given plane and the pixels of the
> + * hovering plane that are xy-positioned as the underlying
> + * color-matched pixels are fully (or partially) replaced with the
> + * replacement color or become completely transparent.
> + */
> + DRM_PLANE_COLORKEY_MODE_DST,
> +
> + DRM_PLANE_COLORKEY_MODES_NUM,
> +};
> +
> /**
> * struct drm_plane_state - mutable plane state
> * @plane: backpointer to the plane
> @@ -54,6 +90,21 @@ struct drm_modeset_acquire_ctx;
> * where N is the number of active planes for given crtc. Note that
> * the driver must set drm_mode_config.normalize_zpos or call
> * drm_atomic_normalize_zpos() to update this before it can be trusted.
> + * @colorkey.mode: color key mode
> + * @colorkey.min: color key range minimum. The value is stored in
> AXYZ16161616 + * format, where A is the alpha value and X, Y and Z
> correspond to the + * color components of the plane's pixel format (usually
> RGB or YUV) + * @colorkey.max: color key range maximum (in AXYZ16161616
> format) + * @colorkey.mask: color key mask value (in AXYZ16161616 format)
> + * @colorkey.format: color key min/max/mask values pixel format (in
> + * DRM_FORMAT_AXYZ16161616 form)
> + * @colorkey.inverted_match: color key min-max matching range is inverted
> + * @colorkey.replacement_mask: color key replacement mask value (in
> + * AXYZ16161616 format)
> + * @colorkey.replacement_value: color key replacement value (in
> + * AXYZ16161616 format)
> + * @colorkey.replacement_format: color key replacement value / mask
> + * pixel format (in DRM_FORMAT_AXYZ16161616 form)
> * @src: clipped source coordinates of the plane (in 16.16)
> * @dst: clipped destination coordinates of the plane
> * @state: backpointer to global drm_atomic_state
> @@ -124,6 +175,19 @@ struct drm_plane_state {
> unsigned int zpos;
> unsigned int normalized_zpos;
>
> + /* Plane colorkey */
> + struct {
> + enum drm_plane_colorkey_mode mode;
> + u64 min;
> + u64 max;
> + u64 mask;
> + u32 format;
> + bool inverted_match;
> + u64 replacement_mask;
> + u64 replacement_value;
> + u32 replacement_format;
> + } colorkey;
> +
> /**
> * @color_encoding:
> *
> @@ -510,6 +574,7 @@ enum drm_plane_type {
> * @alpha_property: alpha property for this plane
> * @zpos_property: zpos property for this plane
> * @rotation_property: rotation property for this plane
> + * @colorkey: colorkey properties for this plane
> * @helper_private: mid-layer private data
> */
> struct drm_plane {
> @@ -587,6 +652,18 @@ struct drm_plane {
> struct drm_property *zpos_property;
> struct drm_property *rotation_property;
>
> + struct {
> + struct drm_property *min_property;
> + struct drm_property *max_property;
> + struct drm_property *mode_property;
> + struct drm_property *mask_property;
> + struct drm_property *format_property;
> + struct drm_property *inverted_match_property;
> + struct drm_property *replacement_mask_property;
> + struct drm_property *replacement_value_property;
> + struct drm_property *replacement_format_property;
> + } colorkey;
> +
> /**
> * @color_encoding_property:
> *
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list