[RFC PATCH v2 1/2] drm: Add generic colorkey properties
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon May 28 13:15:01 UTC 2018
On Sat, May 26, 2018 at 06:56:22PM +0300, Dmitry Osipenko wrote:
> Color keying is the action of replacing pixels matching a given color
> (or range of colors) with transparent pixels in an overlay when
> performing blitting. Depending on the hardware capabilities, the
> matching pixel can either become fully transparent or gain adjustment
> of the pixels component values.
>
> Color keying is found in a large number of devices whose capabilities
> often differ, but they still have enough common features in range to
> standardize color key properties. This commit adds nine generic DRM plane
> properties related to the color keying to cover various HW capabilities.
>
> This patch is based on the initial work done by Laurent Pinchart, most of
> credits for this patch goes to him.
>
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 36 ++++++
> drivers/gpu/drm/drm_blend.c | 229 +++++++++++++++++++++++++++++++++++
> include/drm/drm_blend.h | 3 +
> include/drm/drm_plane.h | 77 ++++++++++++
> 4 files changed, 345 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 895741e9cd7d..5b808cb68654 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -799,6 +799,24 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
> state->rotation = val;
> } else if (property == plane->zpos_property) {
> state->zpos = val;
> + } else if (property == plane->colorkey.mode_property) {
> + state->colorkey.mode = val;
> + } else if (property == plane->colorkey.min_property) {
> + state->colorkey.min = val;
> + } else if (property == plane->colorkey.max_property) {
> + state->colorkey.max = val;
> + } else if (property == plane->colorkey.format_property) {
> + state->colorkey.format = val;
> + } else if (property == plane->colorkey.mask_property) {
> + state->colorkey.mask = val;
> + } else if (property == plane->colorkey.inverted_match_property) {
> + state->colorkey.inverted_match = val;
> + } else if (property == plane->colorkey.replacement_mask_property) {
> + state->colorkey.replacement_mask = val;
> + } else if (property == plane->colorkey.replacement_value_property) {
> + state->colorkey.replacement_value = val;
> + } else if (property == plane->colorkey.replacement_format_property) {
> + state->colorkey.replacement_format = val;
> } else if (property == plane->color_encoding_property) {
> state->color_encoding = val;
> } else if (property == plane->color_range_property) {
> @@ -864,6 +882,24 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
> *val = state->rotation;
> } else if (property == plane->zpos_property) {
> *val = state->zpos;
> + } else if (property == plane->colorkey.mode_property) {
> + *val = state->colorkey.mode;
> + } else if (property == plane->colorkey.min_property) {
> + *val = state->colorkey.min;
> + } else if (property == plane->colorkey.max_property) {
> + *val = state->colorkey.max;
> + } else if (property == plane->colorkey.format_property) {
> + *val = state->colorkey.format;
> + } else if (property == plane->colorkey.mask_property) {
> + *val = state->colorkey.mask;
> + } else if (property == plane->colorkey.inverted_match_property) {
> + *val = state->colorkey.inverted_match;
> + } else if (property == plane->colorkey.replacement_mask_property) {
> + *val = state->colorkey.replacement_mask;
> + } else if (property == plane->colorkey.replacement_value_property) {
> + *val = state->colorkey.replacement_value;
> + } else if (property == plane->colorkey.replacement_format_property) {
> + *val = state->colorkey.replacement_format;
> } else if (property == plane->color_encoding_property) {
> *val = state->color_encoding;
> } else if (property == plane->color_range_property) {
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index a16a74d7e15e..05e5632ce375 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -107,6 +107,11 @@
> * planes. Without this property the primary plane is always below the cursor
> * plane, and ordering between all other planes is undefined.
> *
> + * colorkey:
> + * Color keying is set up with drm_plane_create_colorkey_properties().
> + * It adds support for replacing a range of colors with a transparent
> + * color in the plane.
> + *
> * Note that all the property extensions described here apply either to the
> * plane or the CRTC (e.g. for the background color, which currently is not
> * exposed and assumed to be black).
> @@ -448,3 +453,227 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
> return 0;
> }
> EXPORT_SYMBOL(drm_atomic_normalize_zpos);
> +
> +static const char * const plane_colorkey_mode_name[] = {
> + [DRM_PLANE_COLORKEY_MODE_DISABLED] = "disabled",
> + [DRM_PLANE_COLORKEY_MODE_SRC] = "src-match-src-replace",
> + [DRM_PLANE_COLORKEY_MODE_DST] = "dst-match-src-replace",
This list seems way more limited than I was expecting, at least when
compared to all the different props you're proposing to add.
> +};
> +
> +/**
> + * drm_plane_create_colorkey_properties - create colorkey properties
> + * @plane: drm plane
> + * @supported_modes: bitmask of supported color keying modes
> + *
> + * This function creates the generic color keying properties and attach them to
> + * the plane to enable color keying control for blending operations.
> + *
> + * Color keying is controlled through nine properties:
> + *
> + * colorkey.mode:
> + * The mode is an enumerated property that controls how color keying
> + * operates. The "disabled" mode that disables color keying and is
> + * very likely to exist if color keying is supported, it should be the
> + * default mode.
> + *
> + * colorkey.min, colorkey.max:
> + * These two properties specify the colors that are treated as the color
> + * key. Pixel whose value is in the [min, max] range is the color key
> + * matching pixel. The minimum and maximum values are expressed as a
> + * 64-bit integer in AXYZ16161616 format, where A is the alpha value and
> + * X, Y and Z correspond to the color components of the colorkey.format.
> + * In most cases XYZ will be either RGB or YUV.
> + *
> + * When a single color key is desired instead of a range, userspace shall
> + * set the min and max properties to the same value.
> + *
> + * Drivers return an error from their plane atomic check if range can't be
> + * handled.
> + *
> + * colorkey.format:
> + * This property specifies the pixel format for the colorkey.min / max
> + * properties. The format is given in a form of DRM fourcc code.
Umm. Why we do even need this? This seems incompatible with your earlier
"min/max are specified in 16bpc format" statement.
> + *
> + * Drivers return an error from their plane atomic check if pixel format
> + * is unsupported.
> + *
> + * colorkey.mask:
> + * This property specifies the pixel components mask. Unmasked pixel
> + * components are not participating in the matching. This mask value is
> + * applied to colorkey.min / max values. The mask value is given in a
> + * form of DRM fourcc code corresponding to the colorkey.format property.
> + *
> + * For example: userspace shall set the colorkey.mask to 0x0000ff00
> + * to match only the green component if colorkey.format is set to
> + * DRM_FORMAT_XRGB8888.
> + *
> + * Drivers return an error from their plane atomic check if mask value
> + * can't be handled.
> + *
> + * colorkey.inverted-match:
> + * This property specifies whether the matching min-max range should
> + * be inverted, i.e. pixels outside of the given color range become
> + * the color key match.
> + *
> + * Drivers return an error from their plane atomic check if inversion
> + * mode can't be handled.
Hmm. I'm trying to figure out what this means for the src vs. dst
colorkey modes. Those pretty much already have an inverted meaning when
compared to each other. So I can't figure out from these docs whether
you're supposed to use this when you want a normal dst ckey or normal
src key semantics.
> + *
> + * colorkey.replacement-value:
> + * This property specifies the color value that replaces pixels matching
> + * the color key. The value is expressed in AXYZ16161616 format, where A
> + * is the alpha value and X, Y and Z correspond to the color components
> + * of the colorkey.replacement-format.
> + *
> + * Drivers return an error from their plane atomic check if replacement
> + * value can't be handled.
> + *
> + * colorkey.replacement-format:
> + * This property specifies the pixel format for the
> + * colorkey.replacement-value property. The format is given in a form of
> + * DRM fourcc code.
Again this seems at odds with the 16bpc replacement-value.
> + *
> + * Drivers return an error from their plane atomic check if replacement
> + * pixel format is unsupported.
> + *
> + * colorkey.replacement-mask:
> + * This property specifies the pixel components mask that defines
> + * what components of the colorkey.replacement-value will participate in
> + * replacement of the pixels color. Unmasked pixel components are not
> + * participating in the replacement.
Does that mean that the data for the unmasked bits will be coming
from the source?
> The mask value is given in a form of
> + * DRM fourcc code corresponding to the colorkey.replacement-format
> + * property.
> + *
> + * For example: userspace shall set the colorkey.replacement-mask to
> + * 0x0000ff00 to replace only the green component if
> + * colorkey.replacement-format is set to DRM_FORMAT_XRGB8888.
> + *
> + * Userspace shall set colorkey.replacement-mask to 0 to disable the color
> + * replacement. In this case matching pixels become transparent.
> + *
> + * Drivers return an error from their plane atomic check if replacement
> + * mask value can't be handled.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_plane_create_colorkey_properties(struct drm_plane *plane,
> + u32 supported_modes)
> +{
> + struct drm_prop_enum_list modes_list[DRM_PLANE_COLORKEY_MODES_NUM];
> + struct drm_property *replacement_format_prop;
> + struct drm_property *replacement_value_prop;
> + struct drm_property *replacement_mask_prop;
> + struct drm_property *inverted_match_prop;
> + struct drm_property *format_prop;
> + struct drm_property *mask_prop;
> + struct drm_property *mode_prop;
> + struct drm_property *min_prop;
> + struct drm_property *max_prop;
> + unsigned int modes_num = 0;
> + unsigned int i;
> +
> + /* at least two modes should be supported */
> + if (!supported_modes)
> + return -EINVAL;
> +
> + /* modes are driver-specific, build the list of supported modes */
> + for (i = 0; i < DRM_PLANE_COLORKEY_MODES_NUM; i++) {
> + if (!(supported_modes & BIT(i)))
> + continue;
> +
> + modes_list[modes_num].name = plane_colorkey_mode_name[i];
> + modes_list[modes_num].type = i;
> + modes_num++;
> + }
> +
> + mode_prop = drm_property_create_enum(plane->dev, 0, "colorkey.mode",
> + modes_list, modes_num);
> + if (!mode_prop)
> + return -ENOMEM;
> +
> + mask_prop = drm_property_create_range(plane->dev, 0, "colorkey.mask",
> + 0, U64_MAX);
> + if (!mask_prop)
> + goto err_destroy_mode_prop;
> +
> + min_prop = drm_property_create_range(plane->dev, 0, "colorkey.min",
> + 0, U64_MAX);
> + if (!min_prop)
> + goto err_destroy_mask_prop;
> +
> + max_prop = drm_property_create_range(plane->dev, 0, "colorkey.max",
> + 0, U64_MAX);
> + if (!max_prop)
> + goto err_destroy_min_prop;
> +
> + format_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.format",
> + 0, U32_MAX);
> + if (!format_prop)
> + goto err_destroy_max_prop;
> +
> + inverted_match_prop = drm_property_create_bool(plane->dev, 0,
> + "colorkey.inverted-match");
> + if (!inverted_match_prop)
> + goto err_destroy_format_prop;
> +
> + replacement_mask_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.replacement-mask",
> + 0, U64_MAX);
> + if (!replacement_mask_prop)
> + goto err_destroy_inverted_match_prop;
> +
> + replacement_value_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.replacement-value",
> + 0, U64_MAX);
> + if (!replacement_value_prop)
> + goto err_destroy_replacement_mask_prop;
> +
> + replacement_format_prop = drm_property_create_range(plane->dev, 0,
> + "colorkey.replacement-format",
> + 0, U64_MAX);
> + if (!replacement_format_prop)
> + goto err_destroy_replacement_value_prop;
I don't think we want to add all these props for every driver/hardware.
IMO the set of props we expose should depend on the supported set of
colorkeying modes.
> +
> + drm_object_attach_property(&plane->base, min_prop, 0);
> + drm_object_attach_property(&plane->base, max_prop, 0);
> + drm_object_attach_property(&plane->base, mode_prop, 0);
> + drm_object_attach_property(&plane->base, mask_prop, 0);
> + drm_object_attach_property(&plane->base, format_prop, 0);
> + drm_object_attach_property(&plane->base, inverted_match_prop, 0);
> + drm_object_attach_property(&plane->base, replacement_mask_prop, 0);
> + drm_object_attach_property(&plane->base, replacement_value_prop, 0);
> + drm_object_attach_property(&plane->base, replacement_format_prop, 0);
> +
> + plane->colorkey.min_property = min_prop;
> + plane->colorkey.max_property = max_prop;
> + plane->colorkey.mode_property = mode_prop;
> + plane->colorkey.mask_property = mask_prop;
> + plane->colorkey.format_property = format_prop;
> + plane->colorkey.inverted_match_property = inverted_match_prop;
> + plane->colorkey.replacement_mask_property = replacement_mask_prop;
> + plane->colorkey.replacement_value_property = replacement_value_prop;
> + plane->colorkey.replacement_format_property = replacement_format_prop;
> +
> + return 0;
> +
> +err_destroy_replacement_value_prop:
> + drm_property_destroy(plane->dev, replacement_value_prop);
> +err_destroy_replacement_mask_prop:
> + drm_property_destroy(plane->dev, replacement_mask_prop);
> +err_destroy_inverted_match_prop:
> + drm_property_destroy(plane->dev, inverted_match_prop);
> +err_destroy_format_prop:
> + drm_property_destroy(plane->dev, format_prop);
> +err_destroy_max_prop:
> + drm_property_destroy(plane->dev, max_prop);
> +err_destroy_min_prop:
> + drm_property_destroy(plane->dev, min_prop);
> +err_destroy_mask_prop:
> + drm_property_destroy(plane->dev, mask_prop);
> +err_destroy_mode_prop:
> + drm_property_destroy(plane->dev, mode_prop);
> +
> + return -ENOMEM;
> +}
> +EXPORT_SYMBOL(drm_plane_create_colorkey_properties);
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index 330c561c4c11..8e80d33b643e 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -52,4 +52,7 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
> unsigned int zpos);
> int drm_atomic_normalize_zpos(struct drm_device *dev,
> struct drm_atomic_state *state);
> +
> +int drm_plane_create_colorkey_properties(struct drm_plane *plane,
> + u32 supported_modes);
> #endif
> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> index 26fa50c2a50e..ff7f5ebe2b79 100644
> --- a/include/drm/drm_plane.h
> +++ b/include/drm/drm_plane.h
> @@ -32,6 +32,42 @@ struct drm_crtc;
> struct drm_printer;
> struct drm_modeset_acquire_ctx;
>
> +/**
> + * enum drm_plane_colorkey_mode - uapi plane colorkey mode enumeration
> + */
> +enum drm_plane_colorkey_mode {
> + /**
> + * @DRM_PLANE_COLORKEY_MODE_DISABLED:
> + *
> + * No color matching performed in this mode. This is the default
> + * common mode.
> + */
> + DRM_PLANE_COLORKEY_MODE_DISABLED,
> +
> + /**
> + * @DRM_PLANE_COLORKEY_MODE_SRC:
> + *
> + * In this mode color matching is performed with the pixels of
> + * the given plane and the matched pixels are fully (or partially)
> + * replaced with the replacement color or become completely
> + * transparent.
> + */
> + DRM_PLANE_COLORKEY_MODE_SRC,
> +
> + /**
> + * @DRM_PLANE_COLORKEY_MODE_DST:
> + *
> + * In this mode color matching is performed with the pixels of the
> + * planes z-positioned under the given plane and the pixels of the
> + * hovering plane that are xy-positioned as the underlying
> + * color-matched pixels are fully (or partially) replaced with the
> + * replacement color or become completely transparent.
> + */
> + DRM_PLANE_COLORKEY_MODE_DST,
> +
> + DRM_PLANE_COLORKEY_MODES_NUM,
> +};
> +
> /**
> * struct drm_plane_state - mutable plane state
> * @plane: backpointer to the plane
> @@ -54,6 +90,21 @@ struct drm_modeset_acquire_ctx;
> * where N is the number of active planes for given crtc. Note that
> * the driver must set drm_mode_config.normalize_zpos or call
> * drm_atomic_normalize_zpos() to update this before it can be trusted.
> + * @colorkey.mode: color key mode
> + * @colorkey.min: color key range minimum. The value is stored in AXYZ16161616
> + * format, where A is the alpha value and X, Y and Z correspond to the
> + * color components of the plane's pixel format (usually RGB or YUV)
> + * @colorkey.max: color key range maximum (in AXYZ16161616 format)
> + * @colorkey.mask: color key mask value (in AXYZ16161616 format)
> + * @colorkey.format: color key min/max/mask values pixel format (in
> + * DRM_FORMAT_AXYZ16161616 form)
> + * @colorkey.inverted_match: color key min-max matching range is inverted
> + * @colorkey.replacement_mask: color key replacement mask value (in
> + * AXYZ16161616 format)
> + * @colorkey.replacement_value: color key replacement value (in
> + * AXYZ16161616 format)
> + * @colorkey.replacement_format: color key replacement value / mask
> + * pixel format (in DRM_FORMAT_AXYZ16161616 form)
> * @src: clipped source coordinates of the plane (in 16.16)
> * @dst: clipped destination coordinates of the plane
> * @state: backpointer to global drm_atomic_state
> @@ -124,6 +175,19 @@ struct drm_plane_state {
> unsigned int zpos;
> unsigned int normalized_zpos;
>
> + /* Plane colorkey */
> + struct {
> + enum drm_plane_colorkey_mode mode;
> + u64 min;
> + u64 max;
> + u64 mask;
> + u32 format;
> + bool inverted_match;
> + u64 replacement_mask;
> + u64 replacement_value;
> + u32 replacement_format;
> + } colorkey;
> +
> /**
> * @color_encoding:
> *
> @@ -510,6 +574,7 @@ enum drm_plane_type {
> * @alpha_property: alpha property for this plane
> * @zpos_property: zpos property for this plane
> * @rotation_property: rotation property for this plane
> + * @colorkey: colorkey properties for this plane
> * @helper_private: mid-layer private data
> */
> struct drm_plane {
> @@ -587,6 +652,18 @@ struct drm_plane {
> struct drm_property *zpos_property;
> struct drm_property *rotation_property;
>
> + struct {
> + struct drm_property *min_property;
> + struct drm_property *max_property;
> + struct drm_property *mode_property;
> + struct drm_property *mask_property;
> + struct drm_property *format_property;
> + struct drm_property *inverted_match_property;
> + struct drm_property *replacement_mask_property;
> + struct drm_property *replacement_value_property;
> + struct drm_property *replacement_format_property;
> + } colorkey;
> +
> /**
> * @color_encoding_property:
> *
> --
> 2.17.0
--
Ville Syrjälä
Intel
More information about the dri-devel
mailing list