[PATCH v2 1/7] drm/sun4i: tcon: Pass encoder instead of using panel for RGB setup

Paul Kocialkowski contact at paulk.fr
Thu Nov 1 20:00:39 UTC 2018


Features such as dithering and pixel data edge configuration currently
rely on the panel registered with the TCON driver. However, bridges are
also supported in addition panels.

Instead of retrieving the connector from the panel, pass the encoder
from the calling function, as is done for other interfaces.

The connector is then retrieved from the encoder with the dedicated
helper. Even in the case of bridges, the connector is registered with
the encoder from our driver and is accessible when iterating connectors.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index f949287d926c..262ffb6b0f82 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -478,8 +478,11 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
 }
 
 static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
+				     const struct drm_encoder *encoder,
 				     const struct drm_display_mode *mode)
 {
+	struct drm_connector *connector = sun4i_tcon_get_connector(encoder);
+	struct drm_display_info display_info = connector->display_info;
 	unsigned int bp, hsync, vsync;
 	u8 clk_delay;
 	u32 val = 0;
@@ -491,8 +494,7 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
 	/* Set dithering if needed */
-	if (tcon->panel)
-		sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
+	sun4i_tcon0_mode_set_dithering(tcon, connector);
 
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
@@ -556,17 +558,11 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	 * Following code is a way to avoid quirks all around TCON
 	 * and DOTCLOCK drivers.
 	 */
-	if (tcon->panel) {
-		struct drm_panel *panel = tcon->panel;
-		struct drm_connector *connector = panel->connector;
-		struct drm_display_info display_info = connector->display_info;
-
-		if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
-			clk_set_phase(tcon->dclk, 240);
+	if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+		clk_set_phase(tcon->dclk, 240);
 
-		if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
-			clk_set_phase(tcon->dclk, 0);
-	}
+	if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+		clk_set_phase(tcon->dclk, 0);
 
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
 			   SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
@@ -684,7 +680,7 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
 		sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
 		break;
 	case DRM_MODE_ENCODER_NONE:
-		sun4i_tcon0_mode_set_rgb(tcon, mode);
+		sun4i_tcon0_mode_set_rgb(tcon, encoder, mode);
 		sun4i_tcon_set_mux(tcon, 0, encoder);
 		break;
 	case DRM_MODE_ENCODER_TVDAC:
-- 
2.19.1



More information about the dri-devel mailing list