[PATCH v6 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes

Manasi Navare manasi.d.navare at intel.com
Thu Nov 1 23:54:14 UTC 2018


Thanks for reviewing this patch. Find some comments inline

On Thu, Nov 01, 2018 at 06:46:28PM +0200, Ville Syrjälä wrote:
> On Wed, Oct 24, 2018 at 03:28:23PM -0700, Manasi Navare wrote:
> > According to Display Stream compression spec 1.2, the picture
> > parameter set metadata is sent from source to sink device
> > using the DP Secondary data packet. An infoframe is formed
> > for the PPS SDP header and PPS SDP payload bytes.
> > This patch adds helpers to fill the PPS SDP header
> > and PPS SDP payload according to the DSC 1.2 specification.
> > 
> > v6:
> > * Use proper sequence points for breaking down the
> > assignments (Chris Wilson)
> > * Use SPDX identifier
> > v5:
> > Do not use bitfields for DRM structs (Jani N)
> > v4:
> > * Use DSC constants for params that dont change across
> > configurations
> > v3:
> > * Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst
> > (Daniel Vetter)
> > 
> > v2:
> > * Add EXPORT_SYMBOL for the drm functions (Manasi)
> > 
> > Cc: dri-devel at lists.freedesktop.org
> > Cc: Jani Nikula <jani.nikula at linux.intel.com>
> > Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> > Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > Cc: Harry Wentland <harry.wentland at amd.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > Acked-by: Harry Wentland <harry.wentland at amd.com>
> > ---
> >  Documentation/gpu/drm-kms-helpers.rst |  12 ++
> >  drivers/gpu/drm/Makefile              |   2 +-
> >  drivers/gpu/drm/drm_dsc.c             | 223 ++++++++++++++++++++++++++
> >  include/drm/drm_dsc.h                 |  22 +++
> >  4 files changed, 258 insertions(+), 1 deletion(-)
> >  create mode 100644 drivers/gpu/drm/drm_dsc.c
> > 
> > diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
> > index 4b4dc236ef6f..b422eb8edf16 100644
> > --- a/Documentation/gpu/drm-kms-helpers.rst
> > +++ b/Documentation/gpu/drm-kms-helpers.rst
> > @@ -232,6 +232,18 @@ MIPI DSI Helper Functions Reference
> >  .. kernel-doc:: drivers/gpu/drm/drm_mipi_dsi.c
> >     :export:
> >  
> > +Display Stream Compression Helper Functions Reference
> > +=====================================================
> > +
> > +.. kernel-doc:: drivers/gpu/drm/drm_dsc.c
> > +   :doc: dsc helpers
> > +
> > +.. kernel-doc:: include/drm/drm_dsc.h
> > +   :internal:
> > +
> > +.. kernel-doc:: drivers/gpu/drm/drm_dsc.c
> > +   :export:
> > +
> >  Output Probing Helper Functions Reference
> >  =========================================
> >  
> > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> > index 576ba985e138..3a3e6fb6d476 100644
> > --- a/drivers/gpu/drm/Makefile
> > +++ b/drivers/gpu/drm/Makefile
> > @@ -32,7 +32,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o
> >  drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
> >  drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
> >  
> > -drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
> > +drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_dsc.o drm_probe_helper.o \
> >  		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
> >  		drm_kms_helper_common.o drm_dp_dual_mode_helper.o \
> >  		drm_simple_kms_helper.o drm_modeset_helper.o \
> > diff --git a/drivers/gpu/drm/drm_dsc.c b/drivers/gpu/drm/drm_dsc.c
> > new file mode 100644
> > index 000000000000..21ae8d015afd
> > --- /dev/null
> > +++ b/drivers/gpu/drm/drm_dsc.c
> > @@ -0,0 +1,223 @@
> > +// SPDX-License-Identifier: MIT
> > +/*
> > + * Copyright © 2018 Intel Corp
> > + *
> > + * Author:
> > + * Manasi Navare <manasi.d.navare at intel.com>
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/init.h>
> > +#include <linux/errno.h>
> > +#include <drm/drm_dp_helper.h>
> > +#include <drm/drm_dsc.h>
> > +
> > +/**
> > + * DOC: dsc helpers
> > + *
> > + * These functions contain some common logic and helpers to deal with VESA
> > + * Display Stream Compression standard required for DSC on Display Port/eDP or
> > + * MIPI display interfaces.
> > + */
> > +
> > +/**
> > + * drm_dsc_dp_pps_header_init() - Initializes the PPS Header
> > + * for DisplayPort as per the DP 1.4 spec.
> > + * @pps_sdp: Secondary data packet for DSC Picture Parameter Set
> > + */
> > +void drm_dsc_dp_pps_header_init(struct drm_dsc_pps_infoframe *pps_sdp)
> > +{
> > +	memset(&pps_sdp->pps_header, 0, sizeof(pps_sdp->pps_header));
> > +
> > +	pps_sdp->pps_header.HB1 = DP_SDP_PPS;
> > +	pps_sdp->pps_header.HB2 = DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1;
> > +}
> > +EXPORT_SYMBOL(drm_dsc_dp_pps_header_init);
> > +
> > +/**
> > + * drm_dsc_pps_infoframe_pack() - Populates the DSC PPS infoframe
> > + * using the DSC configuration parameters in the order expected
> > + * by the DSC Display Sink device. For the DSC, the sink device
> > + * expects the PPS payload in the big endian format for the fields
> > + * that span more than 1 byte.
> > + *
> > + * @pps_sdp:
> > + * Secondary data packet for DSC Picture Parameter Set
> > + * @dsc_cfg:
> > + * DSC Configuration data filled by driver
> > + */
> > +void drm_dsc_pps_infoframe_pack(struct drm_dsc_pps_infoframe *pps_sdp,
> > +				struct drm_dsc_config *dsc_cfg)
> > +{
> > +	u8 i = 0;
> 
> int i;

Ok will do,

> 
> > +
> > +	memset(&pps_sdp->pps_payload, 0, sizeof(pps_sdp->pps_payload));
> > +
> > +	/* PPS 0 */
> > +	pps_sdp->pps_payload.dsc_version =
> > +		dsc_cfg->dsc_version_minor |
> > +		dsc_cfg->dsc_version_major << DSC_PPS_VERSION_MAJOR_SHIFT;
> > +
> > +	/* PPS 1, 2 is 0 */
> > +
> > +	/* PPS 3 */
> > +	pps_sdp->pps_payload.pps_3 =
> > +		dsc_cfg->line_buf_depth |
> > +		dsc_cfg->bits_per_component << DSC_PPS_BPC_SHIFT;
> > +
> > +	/* PPS 4 */
> > +	pps_sdp->pps_payload.pps_4 =
> > +		(u8)((dsc_cfg->bits_per_pixel & DSC_PPS_BPP_HIGH_MASK) >>
> > +		     DSC_PPS_MSB_SHIFT) |
> > +		(u8)dsc_cfg->vbr_enable << DSC_PPS_VBR_EN_SHIFT |
> > +		(u8)dsc_cfg->enable422 << DSC_PPS_SIMPLE422_SHIFT |
> > +		(u8)dsc_cfg->convert_rgb << DSC_PPS_CONVERT_RGB_SHIFT |
> > +		(u8)dsc_cfg->block_pred_enable << DSC_PPS_BLOCK_PRED_EN_SHIFT;
> 
> What's with all the (u8) casts?

Since we are assigning to u8 value we dont need type cast, will remove it.

> 
> > +
> > +	/* PPS 5 */
> > +	pps_sdp->pps_payload.bits_per_pixel_low =
> > +		(u8)(dsc_cfg->bits_per_pixel & DSC_PPS_LSB_MASK);
> > +
> > +	/*
> > +	 * The DSC panel expects the PPS packet to have big endian format
> > +	 * for data spanning 2 bytes. Use a macro cpu_to_be16() to convert
> > +	 * to big endian format. If format is little endian, it will swap
> > +	 * bytes to convert to Big endian else keep it unchanged.
> > +	 */
> > +
> > +	/* PPS 6, 7 */
> > +	pps_sdp->pps_payload.pic_height = cpu_to_be16(dsc_cfg->pic_height);
> > +
> > +	/* PPS 8, 9 */
> > +	pps_sdp->pps_payload.pic_width = cpu_to_be16(dsc_cfg->pic_width);
> > +
> > +	/* PPS 10, 11 */
> > +	pps_sdp->pps_payload.slice_height = cpu_to_be16(dsc_cfg->slice_height);
> > +
> > +	/* PPS 12, 13 */
> > +	pps_sdp->pps_payload.slice_width = cpu_to_be16(dsc_cfg->slice_width);
> > +
> > +	/* PPS 14, 15 */
> > +	pps_sdp->pps_payload.chunk_size = cpu_to_be16(dsc_cfg->slice_chunk_size);
> > +
> > +	/* PPS 16 */
> > +	pps_sdp->pps_payload.initial_xmit_delay_high =
> > +		(u8)((dsc_cfg->initial_xmit_delay &
> > +		      DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK) >>
> > +		     DSC_PPS_MSB_SHIFT);
> > +
> > +	/* PPS 17 */
> > +	pps_sdp->pps_payload.initial_xmit_delay_low =
> > +		(u8)(dsc_cfg->initial_xmit_delay & DSC_PPS_LSB_MASK);
> > +
> > +	/* PPS 18, 19 */
> > +	pps_sdp->pps_payload.initial_dec_delay =
> > +		cpu_to_be16(dsc_cfg->initial_dec_delay);
> > +
> > +	/* PPS 20 is 0 */
> > +
> > +	/* PPS 21 */
> > +	pps_sdp->pps_payload.initial_scale_value =
> > +		(u8)dsc_cfg->initial_scale_value;
> > +
> > +	/* PPS 22, 23 */
> > +	pps_sdp->pps_payload.scale_increment_interval =
> > +		cpu_to_be16(dsc_cfg->scale_increment_interval);
> > +
> > +	/* PPS 24 */
> > +	pps_sdp->pps_payload.scale_decrement_interval_high =
> > +		(u8)((dsc_cfg->scale_decrement_interval &
> > +		      DSC_PPS_SCALE_DEC_INT_HIGH_MASK) >>
> > +		     DSC_PPS_MSB_SHIFT);
> > +
> > +	/* PPS 25 */
> > +	pps_sdp->pps_payload.scale_decrement_interval_low =
> > +		(u8)(dsc_cfg->scale_decrement_interval & DSC_PPS_LSB_MASK);
> > +
> > +	/* PPS 26[7:0], PPS 27[7:5] RESERVED */
> > +
> > +	/* PPS 27 */
> > +	pps_sdp->pps_payload.first_line_bpg_offset =
> > +		(u8)dsc_cfg->first_line_bpg_offset;
> > +
> > +	/* PPS 28, 29 */
> > +	pps_sdp->pps_payload.nfl_bpg_offset =
> > +		cpu_to_be16(dsc_cfg->nfl_bpg_offset);
> > +
> > +	/* PPS 30, 31 */
> > +	pps_sdp->pps_payload.slice_bpg_offset =
> > +		cpu_to_be16(dsc_cfg->slice_bpg_offset);
> > +
> > +	/* PPS 32, 33 */
> > +	pps_sdp->pps_payload.initial_offset =
> > +		cpu_to_be16(dsc_cfg->initial_offset);
> > +
> > +	/* PPS 34, 35 */
> > +	pps_sdp->pps_payload.final_offset = cpu_to_be16(dsc_cfg->final_offset);
> > +
> > +	/* PPS 36 */
> > +	pps_sdp->pps_payload.flatness_min_qp = (u8)dsc_cfg->flatness_min_qp;
> > +
> > +	/* PPS 37 */
> > +	pps_sdp->pps_payload.flatness_max_qp = (u8)dsc_cfg->flatness_max_qp;
> > +
> > +	/* PPS 38, 39 */
> > +	pps_sdp->pps_payload.rc_model_size =
> > +		cpu_to_be16((u16)DSC_RC_MODEL_SIZE_CONST);
> > +
> > +	/* PPS 40 */
> > +	pps_sdp->pps_payload.rc_edge_factor = (u8)DSC_RC_EDGE_FACTOR_CONST;
> > +
> > +	/* PPS 41 */
> > +	pps_sdp->pps_payload.rc_quant_incr_limit0 =
> > +		(u8)dsc_cfg->rc_quant_incr_limit0;
> > +
> > +	/* PPS 42 */
> > +	pps_sdp->pps_payload.rc_quant_incr_limit1 =
> > +		(u8)dsc_cfg->rc_quant_incr_limit1;
> > +
> > +	/* PPS 43 */
> > +	pps_sdp->pps_payload.rc_tgt_offset = (u8)DSC_RC_TGT_OFFSET_LO_CONST |
> > +		(u8)DSC_RC_TGT_OFFSET_HI_CONST << DSC_PPS_RC_TGT_OFFSET_HI_SHIFT;
> > +
> > +	/* PPS 44 - 57 */
> > +	for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++)
> 
> Is the -1 correct? The loop below doesn't have it.
> 
> > +		pps_sdp->pps_payload.rc_buf_thresh[i] =
> > +			dsc_cfg->rc_buf_thresh[i];
> > +
> > +	/* PPS 58 - 87 */
> > +	/*
> > +	 * For DSC sink programming the RC Range parameter fields
> > +	 * are as follows: Min_qp[15:11], max_qp[10:6], offset[5:0]
> > +	 */
> > +	for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
> > +		pps_sdp->pps_payload.rc_range_parameters[i] =
> > +			(u16)((dsc_cfg->rc_range_params[i].range_min_qp <<
> > +			       DSC_PPS_RC_RANGE_MINQP_SHIFT) |
> > +			      (dsc_cfg->rc_range_params[i].range_max_qp <<
> > +			       DSC_PPS_RC_RANGE_MAXQP_SHIFT) |
> > +			      (dsc_cfg->rc_range_params[i].range_bpg_offset));
> > +		pps_sdp->pps_payload.rc_range_parameters[i] =
> > +			cpu_to_be16(pps_sdp->pps_payload.rc_range_parameters[i]);
> > +	}
> > +
> > +	/* PPS 88 */
> > +	pps_sdp->pps_payload.native_422_420 = (u8)dsc_cfg->native_422 |
> > +		(u8)dsc_cfg->native_420 << DSC_PPS_NATIVE_420_SHIFT;
> > +
> > +	/* PPS 89 */
> > +	pps_sdp->pps_payload.second_line_bpg_offset =
> > +		(u8)dsc_cfg->second_line_bpg_offset;
> > +
> > +	/* PPS 90, 91 */
> > +	pps_sdp->pps_payload.nsl_bpg_offset =
> > +		cpu_to_be16(dsc_cfg->nsl_bpg_offset);
> > +
> > +	/* PPS 92, 93 */
> > +	pps_sdp->pps_payload.second_line_offset_adj =
> > +		cpu_to_be16(dsc_cfg->second_line_offset_adj);
> > +
> > +	/* PPS 94 - 127 are O */
> > +}
> > +EXPORT_SYMBOL(drm_dsc_pps_infoframe_pack);
> > diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h
> > index 986f962f38d4..0e5e3368d645 100644
> > --- a/include/drm/drm_dsc.h
> > +++ b/include/drm/drm_dsc.h
> > @@ -8,6 +8,7 @@
> >  #ifndef DRM_DSC_H_
> >  #define DRM_DSC_H_
> >  
> > +#include <linux/byteorder/generic.h>
> 
> This header doesn't need that AFAICS.
>

I will move that to drm_dsc.c

Manasi
 
> >  #include <drm/drm_dp_helper.h>
> >  
> >  /* VESA Display Stream Compression DSC 1.2 constants */
> > @@ -24,6 +25,23 @@
> >  #define DSC_RC_TGT_OFFSET_HI_CONST	    3
> >  #define DSC_RC_TGT_OFFSET_LO_CONST	    3
> >  
> > +/* DSC PPS constants and macros */
> > +#define DSC_PPS_VERSION_MAJOR_SHIFT		4
> > +#define DSC_PPS_BPC_SHIFT			4
> > +#define DSC_PPS_MSB_SHIFT			8
> > +#define DSC_PPS_LSB_MASK			(0xFF << 0)
> > +#define DSC_PPS_BPP_HIGH_MASK			(0x3 << 8)
> > +#define DSC_PPS_VBR_EN_SHIFT			2
> > +#define DSC_PPS_SIMPLE422_SHIFT			3
> > +#define DSC_PPS_CONVERT_RGB_SHIFT		4
> > +#define DSC_PPS_BLOCK_PRED_EN_SHIFT		5
> > +#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK	(0x3 << 8)
> > +#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK		(0xF << 8)
> > +#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT		4
> > +#define DSC_PPS_RC_RANGE_MINQP_SHIFT		11
> > +#define DSC_PPS_RC_RANGE_MAXQP_SHIFT		6
> > +#define DSC_PPS_NATIVE_420_SHIFT		1
> > +
> >  /* Configuration for a single Rate Control model range */
> >  struct dsc_rc_range_parameters {
> >  	/* Min Quantization Parameters allowed for this range */
> > @@ -463,4 +481,8 @@ struct drm_dsc_pps_infoframe {
> >  	struct picture_parameter_set pps_payload;
> >  } __packed;
> >  
> > +void drm_dsc_dp_pps_header_init(struct drm_dsc_pps_infoframe *pps_sdp);
> > +void drm_dsc_pps_infoframe_pack(struct drm_dsc_pps_infoframe *pps_sdp,
> > +				struct drm_dsc_config *dsc_cfg);
> > +
> >  #endif /* _DRM_DSC_H_ */
> > -- 
> > 2.18.0
> 
> -- 
> Ville Syrjälä
> Intel


More information about the dri-devel mailing list