[PATCH v3 1/1] drm/panel: Add support for Olimex LCD-OLinuXino panel

[Stefan Mavrodiev]

On 7/16/18 6:08 PM, Rob Herring wrote:
> On Thu, Jul 12, 2018 at 11:21:53AM +0300, Stefan Mavrodiev wrote:
>> This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The
>> panel is used with different LCDs (currently from 480x272 to 1280x800).
>> Small EEPROM chip is used for identification, which holds some
>> factory data and timing requirements.
>>
>> Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
>> ---
>> Changes for v3:
>>    - Change module license from "GPL v2" to "GPL"
>>    - Make use of backlight_enable()/backlight_disable() helpers
>>    - Rework backlight device request
>>    - Remove drm_panel_detach()
>>    - Use module_i2c_driver() for initialization
>>    - Make the first mode preferred
>>    - If num_modes value is invalid, overwrite it with 4, which is the maximum
>>    - Some variable types optimizations
>>
>> Changes for v2:
>>    - Changed lcd_olinuxino_funcs to static const
>>
>>   .../display/panel/olimex,lcd-olinuxino.txt         |  42 +++
> Reviewed-by: Rob Herring <robh at kernel.org>
>
>>   MAINTAINERS                                        |   6 +
>>   drivers/gpu/drm/panel/Kconfig                      |  10 +
>>   drivers/gpu/drm/panel/Makefile                     |   1 +
>>   drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c | 331 +++++++++++++++++++++
>>   5 files changed, 390 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt
>>   create mode 100644 drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c

I would like to ask if there will be any progress on this patch?

Best regards,
Stefan Mavrodiev