[PATCH v7 00/19] DSC enabling remaining patches
Manasi Navare
manasi.d.navare at intel.com
Fri Nov 2 19:51:17 UTC 2018
Thanks Ville for this detailed review. I will spin this now
with the required fixes and send it over.
Manasi
On Fri, Nov 02, 2018 at 08:06:04PM +0200, Ville Syrjälä wrote:
> On Thu, Nov 01, 2018 at 11:46:40PM -0700, Manasi Navare wrote:
> > This patch series addresses review comments on previous DSC series:
> >
> > https://patchwork.freedesktop.org/series/47514/
> >
> > Gaurav K Singh (3):
> > drm/i915/dsc: Define & Compute VESA DSC params
> > drm/i915/dsc: Compute Rate Control parameters for DSC
> > drm/i915/dp: Enable/Disable DSC in DP Sink
> >
> > Manasi Navare (15):
> > drm/dsc: Define Display Stream Compression PPS infoframe
> > drm/dsc: Define VESA Display Stream Compression Capabilities
> > drm/dsc: Add helpers for DSC picture parameter set infoframes
> > drm/i915/dp: Add DSC params and DSC config to intel_crtc_state
> > drm/i915/dp: Compute DSC pipe config in atomic check
> > drm/i915/dp: Do not enable PSR2 if DSC is enabled
> > drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants
> > drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI
> > drm/i915/dp: Configure i915 Picture parameter Set registers during DSC
> > enabling
> > drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs
> > drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes
> > drm/i915/dp: Configure Display stream splitter registers during DSC
> > enable
> > drm/i915/dp: Disable DSC in source by disabling DSS CTL bits
> > drm/i915/dsc: Enable and disable appropriate power wells for VDSC
> > drm/i915/dsc: Add Per connector debugfs node for DSC support/enable
> >
> > Srivatsa, Anusha (1):
> > drm/dsc: Define Rate Control values that do not change over
> > configurations
>
> I think we have these real functional issues left:
> - no FEC so should reject DSC on external DP
> - get_power_domains() thing wasn't right
>
> The potentially user triggerable DRM_ERROR()s have to be
> removed or explained why they can't happen (in which case
> a WARN() would probably be a more clear hint to the reader).
>
> The intel_dsc_enable() call I definitely would like see
> moved into the encoder->per_enable(). No one will think to
> look for it in the current location.
>
> The i915_modparams.enable_psr change seemed unrelated, but
> no idea if it's intentional or not.
>
> And finally there were various style nits that are optional.
> But I would recomment doing them since it's trivial stuff and
> avoids further churn in the code later.
>
> I think that's about it really.
>
> >
> > Documentation/gpu/drm-kms-helpers.rst | 12 +
> > drivers/gpu/drm/Makefile | 2 +-
> > drivers/gpu/drm/drm_dsc.c | 228 +++++
> > drivers/gpu/drm/i915/Makefile | 3 +-
> > drivers/gpu/drm/i915/i915_debugfs.c | 71 +-
> > drivers/gpu/drm/i915/i915_drv.h | 4 +
> > drivers/gpu/drm/i915/i915_reg.h | 1 +
> > drivers/gpu/drm/i915/intel_ddi.c | 8 +-
> > drivers/gpu/drm/i915/intel_display.c | 28 +-
> > drivers/gpu/drm/i915/intel_display.h | 4 +-
> > drivers/gpu/drm/i915/intel_dp.c | 196 +++-
> > drivers/gpu/drm/i915/intel_dp_mst.c | 2 +-
> > drivers/gpu/drm/i915/intel_drv.h | 21 +
> > drivers/gpu/drm/i915/intel_hdmi.c | 21 +-
> > drivers/gpu/drm/i915/intel_psr.c | 16 +-
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +-
> > drivers/gpu/drm/i915/intel_vdsc.c | 1100 +++++++++++++++++++++++
> > include/drm/drm_dp_helper.h | 3 +
> > include/drm/drm_dsc.h | 485 ++++++++++
> > 19 files changed, 2169 insertions(+), 40 deletions(-)
> > create mode 100644 drivers/gpu/drm/drm_dsc.c
> > create mode 100644 drivers/gpu/drm/i915/intel_vdsc.c
> > create mode 100644 include/drm/drm_dsc.h
> >
> > --
> > 2.18.0
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Ville Syrjälä
> Intel
More information about the dri-devel
mailing list