[PATCH 02/10] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection

[Maxime Ripard]

On Sat, Nov 03, 2018 at 03:38:52PM +0530, Jagan Teki wrote:
> Instruction loop selection would require before writing
> loop number registers, so enable idle, LP11 bits on
> loop selection register.
> 
> Reference code available in BSP
> (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
> (dsi_dev[sel]->dsi_inst_loop_sel.dwval = 2<<(4*DSI_INST_ID_LP11) |
> 	3<<(4*DSI_INST_ID_DLY);
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index da152c21ec62..077b57ec964c 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -397,6 +397,10 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
>  	struct mipi_dsi_device *device = dsi->device;
>  	u16 delay;
>  
> +	regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_SEL_REG,
> +		     DSI_INST_ID_HSC  << (4 * DSI_INST_ID_LP11) |
> +		     DSI_INST_ID_HSD  << (4 * DSI_INST_ID_DLY));
> +

Please put this with the other instructions settings below.

hanks!
Maxime
 
-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20181105/3b9baa0b/attachment.sig>