[PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.
Damian Kos
dkos at cadence.com
Mon Nov 5 09:44:53 UTC 2018
Hi Guys,
I'm wondering if this time patch is so good that there're no change requests, or is it so bad that it was rejected without a comment : )
Please let me know if this patch is being in review or was rejected and, if so, what needs to be changed.
Regards,
Damian
-----Original Message-----
From: Damian Kos <dkos at cadence.com>
Sent: Monday, October 8, 2018 23:42
To: David Airlie <airlied at linux.ie>; Rob Herring <robh+dt at kernel.org>; Mark Rutland <mark.rutland at arm.com>; Archit Taneja <architt at codeaurora.org>; Andrzej Hajda <a.hajda at samsung.com>; Laurent Pinchart <Laurent.pinchart at ideasonboard.com>; Gustavo Padovan <gustavo at padovan.org>; Maarten Lankhorst <maarten.lankhorst at linux.intel.com>; Sean Paul <sean at poorly.run>; Sandy Huang <hjc at rock-chips.com>; Heiko Stübner <heiko at sntech.de>; Quentin Schulz <quentin.schulz at free-electrons.com>; Damian Kos <dkos at cadence.com>; Piotr Sroka <piotrs at cadence.com>; dri-devel at lists.freedesktop.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-rockchip at lists.infradead.org
Cc: Rafal Ciepiela <rafalc at cadence.com>; quentin.schulz at bootlin.com; jbergsagel at ti.com
Subject: [PATCH v6 0/6] drm: add support for Cadence MHDP DPI/DP bridge.
Hello!
This is the series of patches that will add support for the Cadence's DPI/DP bridge. Please note that this is a preliminary version of the driver and there will be more patches in the future with updates, fixes and improvements.
Please keep that in mind when looking at FIXME/TODO/XXX comments.
Initially, MHDP driver was developed as a DRM bridge driver and was planed to be placed in drivers/gpu/drm/bridge/mhdp.c. However, there was already a driver for Cadence's DP controller developed by RockChip, but that driver uses the different DRM framework and looks like a part of a bigger system.
Both controllers (including firmware) are quite different internally (MST/FEC/DSC support, link training done by driver, additional commands, IRQ's
etc.) but they have similar register map, except for Framer/Streamer (which is noticeably different), so they appear similar.
The following patches contain:
- Moving common code to drivers/gpu/drm/bridge/cdns-mhdp-common.* and
modifying it a bit (mostly new prefixes for functions and data types) so it
can be used by two, higher level, drivers.
- Modifying existing RockChip's DP driver to use the common code after changes
made to it (use the new cdns_mhdp_device structure and new function names).
- Modifying DRM helpers a bit. Some are required for new driver, some are
updates from DP 1.2 to 1.3 or 1.4.
- Adding documentation for device tree bindings.
- Adding preliminary Cadence DPI/DP bridge driver.
Some of the things that will be added later on include (but are not limited
to):
- DSC support
- FEC support
- HDCP support
Changes in v2:
- Added actual description of what the patch contains, what is it for and
what's going on here in general.
- New structure. Now we have one common low level driver + two high level
drivers - one for RockChip with minimum changes and one, more general, for
Cadence.
- Dropped some changes made to DRM helpers.
- Updated the device tree bindings document.
Changes in v3:
- Corrected dt-bindings document
- Enabled some clocks at startup (since FW doesn't do that anymore).
- Changed Firmware file name to match the file on Linux Firmware repo.
- Added SST audio support
- Made common functions (in cdns-mhdp-common.*) public.
Changes in v4:
- Fixed Kconfig in drm/rockchip
- Fixed Signed-offs
- dp_link_status() is no longer public since it's used only in drm_dp_helper.c
- Replaced EXTRA_CFLAGS with ccflags-y in drm/rockchip Makefile
Changes in v5:
- Fixed Kconfig in drm/rockchip again
- Moved cdn-dp-reg.h (cdns-mhdp-common.h) to include/drm/bridge instead of
drivers/gpu/drm/bridge/
- Updated the mhdp_validate_cr function
Changes in v6:
- Added Reviewed-bys for already reviewed patches
- Dropped patch v5-0003 (that made dp_get_lane_status helper public)
- Added patch with MST support
- Added patch with Cadence SD0801 PHY init
Damian Kos (2):
drm/rockchip: prepare common code for cdns and rk dpi/dp driver
drm/bridge: add PHY initialization in mhdp8546 driver.
Piotr Sroka (1):
drm/bridge: add support for MST in mhdp8546 driver
Quentin Schulz (3):
drm/dp: fix link probing for devices supporting DP 1.4+
dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings
drm: bridge: add support for Cadence MHDP DPI/DP bridge
.../bindings/display/bridge/cdns,mhdp.txt | 43 +
drivers/gpu/drm/bridge/Kconfig | 9 +
drivers/gpu/drm/bridge/Makefile | 3 +
drivers/gpu/drm/bridge/cdns-mhdp-common.c | 1107 +++++++++++++
drivers/gpu/drm/bridge/cdns-mhdp-mst.c | 594 +++++++
drivers/gpu/drm/bridge/cdns-mhdp.c | 1371 +++++++++++++++++
drivers/gpu/drm/bridge/cdns-mhdp.h | 209 +++
drivers/gpu/drm/drm_dp_helper.c | 30 +-
drivers/gpu/drm/rockchip/Kconfig | 4 +-
drivers/gpu/drm/rockchip/Makefile | 2 +-
drivers/gpu/drm/rockchip/cdn-dp-core.c | 234 +--
drivers/gpu/drm/rockchip/cdn-dp-core.h | 43 +-
drivers/gpu/drm/rockchip/cdn-dp-reg.c | 969 ------------
include/drm/bridge/cdns-mhdp-cbs.h | 27 +
.../drm/bridge/cdns-mhdp-common.h | 174 ++-
15 files changed, 3669 insertions(+), 1150 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-common.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-mst.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp.h
delete mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.c
create mode 100644 include/drm/bridge/cdns-mhdp-cbs.h
rename drivers/gpu/drm/rockchip/cdn-dp-reg.h => include/drm/bridge/cdns-mhdp-common.h (77%)
--
2.17.1
More information about the dri-devel
mailing list