[PATCH 1/3 v6] ARM: dts: Modernize the Vexpress PL111 integration
Linus Walleij
linus.walleij at linaro.org
Mon Nov 12 12:31:13 UTC 2018
The Versatile Express was submitted with the actual display
bridges unconnected (but defined in the device tree) and
mock "panels" encoded in the device tree node of the PL111
controller.
This doesn't even remotely describe the actual Versatile
Express hardware. Exploit the SiI9022 bridge by connecting
the PL111 pads to it, making it use EDID or fallback values
to drive the monitor.
The also has to use the reserved memory through the
CMA pool rather than by open coding a memory region and
remapping it explicitly in the driver. To achieve this,
a reserved-memory node must exist in the root of the
device tree, so we need to pull that out of the
motherboard .dtsi include files, and push it into each
top-level device tree instead.
We do the same manouver for all the Versatile Express
boards, taking into account the different location of the
video RAM depending on which chip select is used on
each platform.
This plays nicely with the new PL111 DRM driver and
follows the standard ways of assigning bridges and
memory pools for graphics.
Cc: Sudeep Holla <sudeep.holla at arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Cc: Liviu Dudau <liviu.dudau at arm.com>
Cc: Mali DP Maintainers <malidp at foss.arm.com>
Cc: Robin Murphy <robin.murphy at arm.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v5->v6:
- Change the panel in the RTSMv8 to the simple panel
"arm,rtsmv8-panel" simply.
ChangeLog v4->v5:
- Fix up the RTSMv8 AEM VE by using the new simple VGA
panel I invented in the DRI simple panel.
- NOTE: This patch depends at runtime on the DRM simple
panel patch "drm/panel: simple: Support simple VGA panels"
ChangeLog v3->v4:
- Fix the ARM and ARM64 shared vexpress-v2m-rc1.dtsi
file address-cells etc so that the ports do not give
DTC warnings anymore.
- Fixed up the CA53 DTS: use the right chip select base
at 0x18000000.
- Fixed up the Real-Time Systems Models Virtual Executive
RTSMv8 AEM VE:
- Added the I2C interface (whether implemented in the
emulator or not)
- Fixed the chip select of the memory node to the right
memory base 0x18000000.
- Add right address-cells and size-cells to the
vexpress-v2m.dtsi dvi port as well.
- Create two endpoints for the motherboard and the
core tile in the vexpress-v2m.dtsi. This is just used
by the CA9 VExpress. Tested on both QEMU and the
actual hardware with the DRM driver. This removes the
last warnings from the DTC.
ChangeLog v2->v3:
- Add some reg = <0>; to the ports to make the DTC happy.
- Add reserved memory node to
arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
as well.
ChangeLog v1->v2:
- Fix up the memory address for the -rs1 tiles to 0x18000000
- Drop a bunch of extraneous reg props from the DVI adapter
---
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 49 +++++----------
arch/arm/boot/dts/vexpress-v2m.dtsi | 63 +++++++++----------
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 14 +++++
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 14 +++++
arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 14 +++++
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 43 ++++++-------
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 23 +++++++
.../boot/dts/arm/rtsm_ve-motherboard.dtsi | 37 ++---------
.../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 14 +++++
9 files changed, 150 insertions(+), 121 deletions(-)
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 4488c8fe213a..a9569d15de41 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -43,11 +43,6 @@
bank-width = <4>;
};
- v2m_video_ram: vram at 2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
-
ethernet at 2,02000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x02000000 0x10000>;
@@ -223,13 +218,24 @@
v2m_i2c_dvi: i2c at 160000 {
compatible = "arm,versatile-i2c";
reg = <0x160000 0x1000>;
-
#address-cells = <1>;
#size-cells = <0>;
dvi-transmitter at 39 {
compatible = "sil,sii9022-tpi", "sil,sii9022";
reg = <0x39>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ dvi_bridge_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
};
dvi-transmitter at 60 {
@@ -260,37 +266,16 @@
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+ /* 800x600 16bpp @36MHz works fine */
+ max-memory-bandwidth = <54000000>;
+ memory-region = <&vram>;
port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
+ clcd_pads: endpoint {
+ remote-endpoint = <&dvi_bridge_in>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 4db42f6326a3..fd42e1194179 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -43,11 +43,6 @@
bank-width = <4>;
};
- v2m_video_ram: vram at 3,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <3 0x00000000 0x00800000>;
- };
-
ethernet at 3,02000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <3 0x02000000 0x10000>;
@@ -223,13 +218,37 @@
v2m_i2c_dvi: i2c at 16000 {
compatible = "arm,versatile-i2c";
reg = <0x16000 0x1000>;
-
#address-cells = <1>;
#size-cells = <0>;
dvi-transmitter at 39 {
compatible = "sil,sii9022-tpi", "sil,sii9022";
reg = <0x39>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Both the core tile and the motherboard routes their output
+ * pads to this transmitter. The motherboard system controller
+ * can select one of them as input using a mux register in
+ * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+ * the only platform with this specific set-up.
+ */
+ port at 0 {
+ reg = <0>;
+ dvi_bridge_in_ct: endpoint {
+ remote-endpoint = <&clcd_pads_ct>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ dvi_bridge_in_mb: endpoint {
+ remote-endpoint = <&clcd_pads_mb>;
+ };
+ };
+ };
};
dvi-transmitter at 60 {
@@ -253,6 +272,7 @@
reg-shift = <2>;
};
+
clcd at 1f000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f000 0x1000>;
@@ -260,37 +280,16 @@
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+ /* 800x600 16bpp @36MHz works fine */
+ max-memory-bandwidth = <54000000>;
+ memory-region = <&vram>;
port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
+ clcd_pads_mb: endpoint {
+ remote-endpoint = <&dvi_bridge_in_mb>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <25175000>;
- hactive = <640>;
- hback-porch = <40>;
- hfront-porch = <24>;
- hsync-len = <96>;
- vactive = <480>;
- vback-porch = <32>;
- vfront-porch = <11>;
- vsync-len = <2>;
- };
- };
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 3971427a105b..0dc4277d5f8b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -53,6 +53,20 @@
reg = <0 0x80000000 0 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram at 18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
hdlcd at 2b000000 {
compatible = "arm,hdlcd";
reg = <0 0x2b000000 0 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index ac6b90e9d806..a5136b1adaa2 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -104,6 +104,20 @@
reg = <0 0x80000000 0 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram at 18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
wdt at 2a490000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0 0x2a490000 0 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index e5b4a7570a01..d5b47d526f9e 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -55,6 +55,20 @@
reg = <0x80000000 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram at 18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0x18000000 0x00800000>;
+ no-map;
+ };
+ };
+
hdlcd at 2a110000 {
compatible = "arm,hdlcd";
reg = <0x2a110000 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 7ec3dac1f61d..7f019e0eee84 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -69,6 +69,20 @@
reg = <0x60000000 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Chipselect 3 is physically at 0x4c000000 */
+ vram: vram at 4c000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0x4c000000 0x00800000>;
+ no-map;
+ };
+ };
+
clcd at 10020000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10020000 0x1000>;
@@ -76,36 +90,15 @@
interrupts = <0 44 4>;
clocks = <&oscclk1>, <&oscclk2>;
clock-names = "clcdclk", "apb_pclk";
- max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+ /* 1024x768 16bpp @65MHz */
+ max-memory-bandwidth = <95000000>;
port {
- clcd_pads: endpoint {
- remote-endpoint = <&clcd_panel>;
+ clcd_pads_ct: endpoint {
+ remote-endpoint = <&dvi_bridge_in_ct>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- clcd_panel: endpoint {
- remote-endpoint = <&clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <63500127>;
- hactive = <1024>;
- hback-porch = <152>;
- hfront-porch = <48>;
- hsync-len = <104>;
- vactive = <768>;
- vback-porch = <23>;
- vfront-porch = <3>;
- vsync-len = <4>;
- };
- };
};
memory-controller at 100e0000 {
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 602f63f72c37..fe4fda473c0a 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -78,6 +78,20 @@
<0x00000008 0x80000000 0 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2,00000000 is physically at 0x18000000 */
+ vram: vram at 18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0x00000000 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
gic: interrupt-controller at 2c001000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -107,6 +121,15 @@
<0 63 4>;
};
+ panel {
+ compatible = "arm,rtsm-display";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
+
smb at 8000000 {
compatible = "simple-bus";
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index d2dbc3f39263..b25f3cbd3da8 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -24,11 +24,6 @@
bank-width = <4>;
};
- v2m_video_ram: vram at 2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
-
ethernet at 2,02000000 {
compatible = "smsc,lan91c111";
reg = <2 0x02000000 0x10000>;
@@ -187,38 +182,16 @@
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
clock-names = "clcdclk", "apb_pclk";
- arm,pl11x,framebuffer = <0x18000000 0x00180000>;
- memory-region = <&v2m_video_ram>;
- max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+ /* 800x600 16bpp @36MHz works fine */
+ max-memory-bandwidth = <54000000>;
+ memory-region = <&vram>;
port {
- v2m_clcd_pads: endpoint {
- remote-endpoint = <&v2m_clcd_panel>;
+ clcd_pads: endpoint {
+ remote-endpoint = <&panel_in>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
-
- panel {
- compatible = "panel-dpi";
-
- port {
- v2m_clcd_panel: endpoint {
- remote-endpoint = <&v2m_clcd_pads>;
- };
- };
-
- panel-timing {
- clock-frequency = <63500127>;
- hactive = <1024>;
- hback-porch = <152>;
- hfront-porch = <48>;
- hsync-len = <104>;
- vactive = <768>;
- vback-porch = <23>;
- vfront-porch = <3>;
- vsync-len = <4>;
- };
- };
};
virtio-block at 130000 {
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 38880380e0fa..8981c3d2ff18 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -65,6 +65,20 @@
reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Chipselect 2 is physically at 0x18000000 */
+ vram: vram at 18000000 {
+ /* 8 MB of designated video RAM */
+ compatible = "shared-dma-pool";
+ reg = <0 0x18000000 0 0x00800000>;
+ no-map;
+ };
+ };
+
gic: interrupt-controller at 2c001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
2.17.2
More information about the dri-devel
mailing list