[PATCH 1/3] dt-bindings: backlight: fix vendor prefix for ArcticSand arcxcnn driver bindings

[Rob Herring]

On Wed, Nov 07, 2018 at 07:10:38AM -0500, Brian Dodge wrote:
> The vendor-prefixes.txt file properly refers to ArcticSand
> as arctic but the driver bindings improperly abbreviated the
> prefix to arc. This was a mistake in the original patch
> 

Are there any users and are they okay with this changing?

> Signed-off-by: Brian Dodge <bdodge09 at gmail.com>
> ---
>  .../bindings/leds/backlight/arcxcnn_bl.txt           | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> index 230abde..dcaa239 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> @@ -1,8 +1,8 @@
> -Binding for ArcticSand arc2c0608 LED driver
> +Binding for ArcticSand arc family LED drivers
> 
>  Required properties:
> -- compatible:		should be "arc,arc2c0608"
> -- reg:			slave address
> +- compatible:	"arctic,arc1c0608", "arctic,arc2c0608", "arctic,arc3c0845"

Format one per line please.

> +- reg:		slave address
> 
>  Optional properties:
>  - default-brightness:	brightness value on boot, value from: 0-4095
> @@ -11,19 +11,19 @@ Optional properties:
>  - led-sources:		List of enabled channels from 0 to 5.
>  			See Documentation/devicetree/bindings/leds/common.txt
> 
> -- arc,led-config-0:	setting for register ILED_CONFIG_0
> -- arc,led-config-1:	setting for register ILED_CONFIG_1
> -- arc,dim-freq:		PWM mode frequence setting (bits [3:0] used)
> -- arc,comp-config:	setting for register CONFIG_COMP
> -- arc,filter-config:	setting for register FILTER_CONFIG
> -- arc,trim-config:	setting for register IMAXTUNE
> +- arctic,led-config-0:	setting for register ILED_CONFIG_0
> +- arctic,led-config-1:	setting for register ILED_CONFIG_1
> +- arctic,dim-freq:		PWM mode frequence setting (bits [3:0] used)
> +- arctic,comp-config:	setting for register CONFIG_COMP
> +- arctic,filter-config:	setting for register FILTER_CONFIG
> +- arctic,trim-config:	setting for register IMAXTUNE
> 
>  Note: Optional properties not specified will default to values in IC EPROM
> 
>  Example:
> 
>  arc2c0608 at 30 {
> -	compatible = "arc,arc2c0608";
> +	compatible = "arctic,arc2c0608";
>  	reg = <0x30>;
>  	default-brightness = <500>;
>  	label = "lcd-backlight";
> --
> 2.7.4
>