[PATCH] drm/panel: Set max rate for Ilitek ILI9881C

[Andrzej Hajda]

On 14.11.2018 12:17, Linus Walleij wrote:
> After adding the hs_rate and lp_rate fields to the DSI device
> we need to populate these accordingly so display drivers can
> respect them.
>
> This figure for HS rate comes from the ILI9881C manual, the
> calculation is explained in the comment.
>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Maxime Ripard <maxime.ripard at bootlin.com>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
>  drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> index 3ad4a46c4e94..f58250f84f8c 100644
> --- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
> @@ -465,6 +465,13 @@ static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
>  	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
>  	dsi->format = MIPI_DSI_FMT_RGB888;
>  	dsi->lanes = 4;
> +	/*
> +	 * The datasheet (table 39) specifies "limited clock channel speed"
> +	 * for 4 lanes as 550 Mbps for RGB888. As this is 4 bits at the time,
> +	 * the maximum HS frequency is 550/4 = 137.5 MHz.
> +	 */
> +	dsi->hs_rate = 137500000;
> +	/* FIXME: LP max rate does not seem to be specified */
>  
>  	return mipi_dsi_attach(dsi);
>  }

Table 42 says: "Length of LP-00, LP-01, LP-10 or LP-11 periods": min
50ns, max 75ns.

1/50ns = max LPM rate = 20.000.000Hz


Regards

Andrzej