[PATCH 1/1] drm: msm: Replace dma_map_sg with dma_sync_sg*

Tomasz Figa tfiga at chromium.org
Wed Nov 21 03:48:44 UTC 2018


Hi Jordan, Vivek,

On Wed, Nov 21, 2018 at 12:41 AM Jordan Crouse <jcrouse at codeaurora.org> wrote:
>
> On Tue, Nov 20, 2018 at 03:24:37PM +0530, Vivek Gautam wrote:
> > dma_map_sg() expects a DMA domain. However, the drm devices
> > have been traditionally using unmanaged iommu domain which
> > is non-dma type. Using dma mapping APIs with that domain is bad.
> >
> > Replace dma_map_sg() calls with dma_sync_sg_for_device{|cpu}()
> > to do the cache maintenance.
> >
> > Signed-off-by: Vivek Gautam <vivek.gautam at codeaurora.org>
> > Suggested-by: Tomasz Figa <tfiga at chromium.org>
> > ---
> >
> > Tested on an MTP sdm845:
> > https://github.com/vivekgautam1/linux/tree/v4.19/sdm845-mtp-display-working
> >
> >  drivers/gpu/drm/msm/msm_gem.c | 27 ++++++++++++++++++++-------
> >  1 file changed, 20 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
> > index 00c795ced02c..d7a7af610803 100644
> > --- a/drivers/gpu/drm/msm/msm_gem.c
> > +++ b/drivers/gpu/drm/msm/msm_gem.c
> > @@ -81,6 +81,8 @@ static struct page **get_pages(struct drm_gem_object *obj)
> >               struct drm_device *dev = obj->dev;
> >               struct page **p;
> >               int npages = obj->size >> PAGE_SHIFT;
> > +             struct scatterlist *s;
> > +             int i;
> >
> >               if (use_pages(obj))
> >                       p = drm_gem_get_pages(obj);
> > @@ -107,9 +109,19 @@ static struct page **get_pages(struct drm_gem_object *obj)
> >               /* For non-cached buffers, ensure the new pages are clean
> >                * because display controller, GPU, etc. are not coherent:
> >                */
> > -             if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
> > -                     dma_map_sg(dev->dev, msm_obj->sgt->sgl,
> > -                                     msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
> > +             if (msm_obj->flags & (MSM_BO_WC | MSM_BO_UNCACHED)) {
> > +                     /*
> > +                      * Fake up the SG table so that dma_sync_sg_*()
> > +                      * can be used to flush the pages associated with it.
> > +                      */
>
> We aren't really faking.  The table is real, we are just slightly abusing the
> sg_dma_address() which makes this comment a bit misleading. Instead I would
> probably say something like:
>
> /* dma_sync_sg_* flushes pages using sg_dma_address() so point it at the
>  * physical page for the right behavior */
>
> Or something like that.
>

It's actually quite complicated, but I agree that the comment isn't
very precise. The cases are as follows:
- arm64 iommu_dma_ops use sg_phys()
https://elixir.bootlin.com/linux/v4.20-rc3/source/arch/arm64/mm/dma-mapping.c#L599
- swiotlb_dma_ops used on arm64 if no IOMMU is available use
sg->dma_address directly:
https://elixir.bootlin.com/linux/v4.20-rc3/source/kernel/dma/swiotlb.c#L832
- arm_dma_ops use sg_dma_address():
https://elixir.bootlin.com/linux/v4.20-rc3/source/arch/arm/mm/dma-mapping.c#L1130
- arm iommu_ops use sg_page():
https://elixir.bootlin.com/linux/v4.20-rc3/source/arch/arm/mm/dma-mapping.c#L1869

Sounds like a mess...

> > +                     for_each_sg(msm_obj->sgt->sgl, s,
> > +                                 msm_obj->sgt->nents, i)
> > +                             sg_dma_address(s) = sg_phys(s);
> > +
>
> I'm wondering - wouldn't we want to do this association for cached buffers to so
> we could sync them correctly in cpu_prep and cpu_fini?  Maybe it wouldn't hurt
> to put this association in the main path (obviously the sync should stay inside
> the conditional for uncached buffers).
>

I guess it wouldn't hurt indeed. Note that cpu_prep/fini seem to be
missing the sync call currently.

P.S. Jordan, not sure if it's my Gmail or your email client, but your
message had all the recipients in a Reply-to header, except you, so
pressing Reply to all in my case led to a message that didn't have you
in recipients anymore...

Best regards,
Tomasz


More information about the dri-devel mailing list