[PATCH v3] drm/panel: Set max rate for Innolux p079x panels

[Andrzej Hajda]

On 19.11.2018 10:15, Linus Walleij wrote:
> After adding the hs_rate and lp_rate fields to the DSI device
> we need to populate these accordingly so display drivers can
> respect them.
>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Chris Zhong <zyw at rock-chips.com>
> Cc: Lin Huang <hl at rock-chips.com>
> Cc: Heiko Stuebner <heiko at sntech.de>
> Tested-by: Heiko Stuebner <heiko at sntech.de>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v2->v3:
> - Add the 10MHz LP speed.
> ChangeLog v1->v2:
> - Collect Heiko's Test tag
> ---
>  drivers/gpu/drm/panel/panel-innolux-p079zca.c | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
> index ca4ae45dd307..cca3f3b7710e 100644
> --- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
> +++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
> @@ -518,6 +518,10 @@ static int innolux_panel_probe(struct mipi_dsi_device *dsi)
>  	dsi->mode_flags = desc->flags;
>  	dsi->format = desc->format;
>  	dsi->lanes = desc->lanes;
> +	/* This is presumably the HS rate */
> +	dsi->hs_rate = desc->mode->clock * 1000;


Again, not true.

hs_rate = pixel_clock * bits_per_pixel / lane / 2;

'/ 2' is due to Double Data Rate' - two bits are transmitted per one tick.


Regards

Andrzej


> +	/* 10MHz according to table 3.6.1.2, symbol FDSICLK_LP */
> +	dsi->lp_rate = 10000000;
>  
>  	err = innolux_panel_add(dsi, desc);
>  	if (err < 0)