[PATCH v10 00/23] Respin of remaining DSC + FEC patches

[Manasi Navare]

pushed the latest version of this series (https://patchwork.freedesktop.org/series/53184/) and
first 5 from https://patchwork.freedesktop.org/series/53113/ to dinq

Thanks for the patches and reviews!

Manasi

On Tue, Nov 20, 2018 at 10:37:13AM -0800, Manasi Navare wrote:
> This patch series addresses review comments from previous series posted:
> https://patchwork.freedesktop.org/series/52461/
> 
> Anusha Srivatsa (4):
>   i915/dp/fec: Add fec_enable to the crtc state.
>   drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION
>   i915/dp/fec: Configure the Forward Error Correction bits.
>   drm/i915/fec: Disable FEC state.
> 
> Gaurav K Singh (3):
>   drm/i915/dsc: Define & Compute VESA DSC params
>   drm/i915/dsc: Compute Rate Control parameters for DSC
>   drm/i915/dp: Enable/Disable DSC in DP Sink
> 
> Manasi Navare (15):
>   drm/dsc: Modify DRM helper to return complete DSC color depth
>     capabilities
>   drm/dsc: Define Display Stream Compression PPS infoframe
>   drm/dsc: Define VESA Display Stream Compression Capabilities
>   drm/dsc: Add helpers for DSC picture parameter set infoframes
>   drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants
>   drm/i915/dp: Add DSC params and DSC config to intel_crtc_state
>   drm/i915/dp: Compute DSC pipe config in atomic check
>   drm/i915/dp: Do not enable PSR2 if DSC is enabled
>   drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI
>   drm/i915/dp: Configure i915 Picture parameter Set registers during DSC
>     enabling
>   drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs
>   drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes
>   drm/i915/dp: Configure Display stream splitter registers during DSC
>     enable
>   drm/i915/dp: Disable DSC in source by disabling DSS CTL bits
>   drm/i915/dsc: Enable and disable appropriate power wells for VDSC
> 
> Srivatsa, Anusha (1):
>   drm/dsc: Define Rate Control values that do not change over
>     configurations
> 
>  Documentation/gpu/drm-kms-helpers.rst   |   12 +
>  drivers/gpu/drm/Makefile                |    2 +-
>  drivers/gpu/drm/drm_dp_helper.c         |   14 +-
>  drivers/gpu/drm/drm_dsc.c               |  228 +++++
>  drivers/gpu/drm/i915/Makefile           |    3 +-
>  drivers/gpu/drm/i915/i915_drv.h         |    4 +
>  drivers/gpu/drm/i915/i915_reg.h         |    3 +
>  drivers/gpu/drm/i915/intel_ddi.c        |   75 +-
>  drivers/gpu/drm/i915/intel_display.c    |    4 +-
>  drivers/gpu/drm/i915/intel_display.h    |    3 +-
>  drivers/gpu/drm/i915/intel_dp.c         |  233 ++++-
>  drivers/gpu/drm/i915/intel_drv.h        |   21 +
>  drivers/gpu/drm/i915/intel_hdmi.c       |   21 +-
>  drivers/gpu/drm/i915/intel_psr.c        |   14 +
>  drivers/gpu/drm/i915/intel_runtime_pm.c |    4 +-
>  drivers/gpu/drm/i915/intel_vdsc.c       | 1088 +++++++++++++++++++++++
>  include/drm/drm_dp_helper.h             |    6 +-
>  include/drm/drm_dsc.h                   |  485 ++++++++++
>  18 files changed, 2179 insertions(+), 41 deletions(-)
>  create mode 100644 drivers/gpu/drm/drm_dsc.c
>  create mode 100644 drivers/gpu/drm/i915/intel_vdsc.c
>  create mode 100644 include/drm/drm_dsc.h
> 
> -- 
> 2.19.1
>