[PATCH v5 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC

[Manasi Navare]

A separate power well 2 (PG2) is required for VDSC on eDP transcoder
whereas all other transcoders use the power wells associated with the
transcoders for VDSC.
This patch adds a helper to obtain correct power domain depending on
transcoder being used and enables/disables the power wells during
VDSC enabling/disabling.

Suggested-by: Ville Syrjala <ville.syrjala at linux.intel.com>
Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
Cc: Imre Deak <imre.deak at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
---
 drivers/gpu/drm/i915/intel_vdsc.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
index 4963e80a87f0..d2b4601459c3 100644
--- a/drivers/gpu/drm/i915/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/intel_vdsc.c
@@ -581,6 +581,23 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
 	return 0;
 }
 
+static enum intel_display_power_domain
+intel_dsc_get_power_domains(struct intel_crtc_state *crtc_state)
+{
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
+	/*
+         * On ICL+ PW2/ POWER_DOMAIN_VDSC_PIPE_A is required for
+         * VDSC/joining for eDP transcoder.
+         * For any other transcoder, VDSC/joining uses the power well associated
+         * with the pipe/transcoder in use.
+         */
+	if (cpu_transcoder == TRANSCODER_EDP)
+		return POWER_DOMAIN_VDSC_PIPE_A;
+	else
+		return POWER_DOMAIN_TRANSCODER(cpu_transcoder);
+}
+
 static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,
 						struct intel_crtc_state *crtc_state)
 {
@@ -1019,6 +1036,10 @@ void intel_dsc_enable(struct intel_encoder *encoder,
 	if (!crtc_state->dsc_params.compression_enable)
 		return;
 
+	/* Enable Power wells for VDSC/joining */
+	intel_display_power_get(dev_priv,
+				intel_dsc_get_power_domains(crtc_state));
+
 	intel_configure_pps_for_dsc_encoder(encoder, crtc_state);
 
 	intel_dp_send_dsc_pps_sdp(encoder, crtc_state);
@@ -1073,4 +1094,8 @@ void intel_dsc_disable(struct intel_encoder *encoder,
 				  RIGHT_BRANCH_VDSC_ENABLE);
 	I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
 
+	/* Disable Power wells for VDSC/joining */
+	intel_display_power_put(dev_priv,
+				intel_dsc_get_power_domains(old_crtc_state));
+
 }
-- 
2.18.0