[PATCH 2/2] drm/i915/gen9+: Add support for pipe background color
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Oct 11 11:33:31 UTC 2018
On Wed, Oct 10, 2018 at 04:50:51PM -0700, Matt Roper wrote:
> Gen9+ platforms allow CRTC's to be programmed with a background/canvas
> color below the programmable planes. Let's expose this for use by
> compositors.
>
> Cc: dri-devel at lists.freedesktop.org
> Cc: wei.c.li at intel.com
> Cc: harish.krupo.kps at intel.com
> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 9 +++++++++
> drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
> drivers/gpu/drm/i915/intel_display.c | 34 ++++++++++++++++++++++++++++++++++
> 3 files changed, 49 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 4565eda29c87..cc423f7f3e62 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -3254,6 +3254,15 @@ static int i915_display_info(struct seq_file *m, void *unused)
> intel_plane_info(m, crtc);
> }
>
> + if (INTEL_GEN(dev_priv) >= 9 && pipe_config->base.active) {
> + uint64_t background = pipe_config->base.background_color;
> +
> + seq_printf(m, "\tbackground color (10bpc): r=%x g=%x b=%x\n",
> + DRM_RGBA_RED(background, 10),
> + DRM_RGBA_GREEN(background, 10),
> + DRM_RGBA_BLUE(background, 10));
> + }
> +
> seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s \n",
> yesno(!crtc->cpu_fifo_underrun_disabled),
> yesno(!crtc->pch_fifo_underrun_disabled));
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 20785417953d..988183870f6e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -5661,6 +5661,12 @@ enum {
> #define PIPEMISC_DITHER_TYPE_SP (0 << 2)
> #define PIPEMISC(pipe) _MMIO_PIPE2(pipe, _PIPE_MISC_A)
>
> +/* Skylake+ pipe bottom (background) color */
> +#define _PIPE_BOTTOM_COLOR_A 0x70034
> +#define PIPE_BOTTOM_GAMMA_ENABLE (1 << 31)
> +#define PIPE_BOTTOM_CSC_ENABLE (1 << 30)
> +#define PIPE_BOTTOM_COLOR(pipe) _MMIO_PIPE2(pipe, _PIPE_BOTTOM_COLOR_A)
> +
> #define VLV_DPFLIPSTAT _MMIO(VLV_DISPLAY_BASE + 0x70028)
> #define PIPEB_LINE_COMPARE_INT_EN (1 << 29)
> #define PIPEB_HLINE_INT_EN (1 << 28)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index a145efba9157..2ee402a98e70 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3853,6 +3853,28 @@ void intel_finish_reset(struct drm_i915_private *dev_priv)
> clear_bit(I915_RESET_MODESET, &dev_priv->gpu_error.flags);
> }
>
> +static void skl_update_background_color(const struct intel_crtc_state *cstate)
> +{
> + struct intel_crtc *crtc = to_intel_crtc(cstate->base.crtc);
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + uint64_t propval = cstate->base.background_color;
> + uint32_t hwval;
Just 'val' or 'tmp' would be more consistent with existing code.
> +
> + /* Hardware is programmed with 10 bits of precision */
> + hwval = DRM_RGBA_RED(propval, 10) << 20
> + | DRM_RGBA_GREEN(propval, 10) << 10
> + | DRM_RGBA_BLUE(propval, 10);
> +
> + /*
> + * Set CSC and gamma for bottom color to ensure background pixels
> + * receive the same color transformations as plane content.
> + */
> + hwval |= PIPE_BOTTOM_CSC_ENABLE;
> + hwval |= PIPE_BOTTOM_GAMMA_ENABLE;
Maybe we want these as a separate bugfix up front?
> +
> + I915_WRITE_FW(PIPE_BOTTOM_COLOR(crtc->pipe), hwval);
> +}
> +
> static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
> const struct intel_crtc_state *new_crtc_state)
> {
> @@ -3887,6 +3909,9 @@ static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_sta
> else if (old_crtc_state->pch_pfit.enabled)
> ironlake_pfit_disable(old_crtc_state);
> }
> +
> + if (new_crtc_state->base.bgcolor_changed)
> + skl_update_background_color(new_crtc_state);
> }
>
> static void intel_fdi_normal_train(struct intel_crtc *crtc)
> @@ -10791,6 +10816,9 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
> crtc_state->planes_changed = true;
> }
>
> + if (crtc_state->bgcolor_changed)
> + pipe_config->update_pipe = true;
> +
> ret = 0;
> if (dev_priv->display.compute_pipe_wm) {
> ret = dev_priv->display.compute_pipe_wm(pipe_config);
> @@ -13831,6 +13859,7 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
>
> static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
> {
> + struct drm_mode_config *mode_config = &dev_priv->drm.mode_config;
> struct intel_crtc *intel_crtc;
> struct intel_crtc_state *crtc_state = NULL;
> struct intel_plane *primary = NULL;
> @@ -13905,6 +13934,11 @@ static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
>
> WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
>
> + if (INTEL_GEN(dev_priv) >= 9)
> + drm_object_attach_property(&intel_crtc->base.base,
> + mode_config->bgcolor_property,
> + drm_rgba(16, 0, 0, 0, 0xffff));
> +
> return 0;
>
> fail:
> --
> 2.14.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Ville Syrjälä
Intel
More information about the dri-devel
mailing list