[PATCH 4/7] drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value

[Tomi Valkeinen]

Initially DP0_SRCCTRL is set to a static value which includes
DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of
1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number.

This patch changes the configuration as follows:

Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct
value.

DP1_SRCCTRL needs to bits to be set to the same value as DP0_SRCCTRL:
SSCG and BW27. All other bits can be zero.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
 drivers/gpu/drm/bridge/tc358767.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index fee53422c31f..ab299f4debfa 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -836,12 +836,11 @@ static int tc_main_link_setup(struct tc_data *tc)
 	if (!tc->mode)
 		return -EINVAL;
 
-	/* from excel file - DP0_SrcCtrl */
-	tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
-		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
-		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
-	/* from excel file - DP1_SrcCtrl */
-	tc_write(DP1_SRCCTRL, 0x00003083);
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
+	/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
+	tc_write(DP1_SRCCTRL,
+		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
+		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki