[PATCH 08/27] clk: sunxi-ng: Add support for H6 DE3 clocks

Chen-Yu Tsai wens at csie.org
Tue Sep 4 09:04:21 UTC 2018


On Sun, Sep 2, 2018 at 3:27 PM Jernej Skrabec <jernej.skrabec at siol.net> wrote:
>
> Support for mixer0, mixer1, writeback and rotation units is added.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> ---
>  drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 65 ++++++++++++++++++++++++++++
>  drivers/clk/sunxi-ng/ccu-sun8i-de2.h |  1 +
>  2 files changed, 66 insertions(+)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> index bae5ee67a797..4535c1c27d27 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> @@ -31,6 +31,8 @@ static SUNXI_CCU_GATE(bus_mixer1_clk, "bus-mixer1",   "bus-de",
>                       0x04, BIT(1), 0);
>  static SUNXI_CCU_GATE(bus_wb_clk,      "bus-wb",       "bus-de",
>                       0x04, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_rot_clk,     "bus-rot",      "bus-de",
> +                     0x04, BIT(3), 0);
>
>  static SUNXI_CCU_GATE(mixer0_clk,      "mixer0",       "mixer0-div",
>                       0x00, BIT(0), CLK_SET_RATE_PARENT);
> @@ -38,6 +40,8 @@ static SUNXI_CCU_GATE(mixer1_clk,     "mixer1",       "mixer1-div",
>                       0x00, BIT(1), CLK_SET_RATE_PARENT);
>  static SUNXI_CCU_GATE(wb_clk,          "wb",           "wb-div",
>                       0x00, BIT(2), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_GATE(rot_clk,         "rot",          "rot-div",
> +                     0x00, BIT(3), CLK_SET_RATE_PARENT);
>
>  static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
>                    CLK_SET_RATE_PARENT);
> @@ -45,6 +49,8 @@ static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
>                    CLK_SET_RATE_PARENT);
>  static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
>                    CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M(rot_div_clk, "rot-div", "de", 0x0c, 0x0c, 4,
> +                  CLK_SET_RATE_PARENT);
>
>  static SUNXI_CCU_M(mixer0_div_a83_clk, "mixer0-div", "pll-de", 0x0c, 0, 4,
>                    CLK_SET_RATE_PARENT);
> @@ -53,6 +59,24 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4,
>  static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
>                    CLK_SET_RATE_PARENT);
>
> +static struct ccu_common *sun50i_h6_de3_clks[] = {
> +       &mixer0_clk.common,
> +       &mixer1_clk.common,
> +       &wb_clk.common,
> +
> +       &bus_mixer0_clk.common,
> +       &bus_mixer1_clk.common,
> +       &bus_wb_clk.common,
> +
> +       &mixer0_div_clk.common,
> +       &mixer1_div_clk.common,
> +       &wb_div_clk.common,
> +
> +       &bus_rot_clk.common,
> +       &rot_clk.common,
> +       &rot_div_clk.common,
> +};
> +
>  static struct ccu_common *sun8i_a83t_de2_clks[] = {
>         &mixer0_clk.common,
>         &mixer1_clk.common,
> @@ -92,6 +116,26 @@ static struct ccu_common *sun8i_v3s_de2_clks[] = {
>         &wb_div_clk.common,
>  };
>
> +static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
> +       .hws    = {
> +               [CLK_MIXER0]            = &mixer0_clk.common.hw,
> +               [CLK_MIXER1]            = &mixer1_clk.common.hw,
> +               [CLK_WB]                = &wb_clk.common.hw,
> +               [CLK_ROT]               = &rot_clk.common.hw,
> +
> +               [CLK_BUS_MIXER0]        = &bus_mixer0_clk.common.hw,
> +               [CLK_BUS_MIXER1]        = &bus_mixer1_clk.common.hw,
> +               [CLK_BUS_WB]            = &bus_wb_clk.common.hw,
> +               [CLK_BUS_ROT]           = &bus_rot_clk.common.hw,
> +
> +               [CLK_MIXER0_DIV]        = &mixer0_div_clk.common.hw,
> +               [CLK_MIXER1_DIV]        = &mixer1_div_clk.common.hw,
> +               [CLK_WB_DIV]            = &wb_div_clk.common.hw,
> +               [CLK_ROT_DIV]           = &rot_div_clk.common.hw,
> +       },
> +       .num    = 12,

It's best not to openly code these. It is error prone, like having
an index beyond .num, which then never gets registered.

Instead, please update CLK_NUMBERS and use that instead. sunxi_ccu_probe()
can handle holes in .hws.

On the other hand, it can't handle holes in the ccu_reset_map. Hope we
never have to deal with such an instance.

ChenYu

> +};
> +
>  static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
>         .hws    = {
>                 [CLK_MIXER0]            = &mixer0_clk.common.hw,
> @@ -156,6 +200,13 @@ static struct ccu_reset_map sun50i_a64_de2_resets[] = {
>         [RST_WB]        = { 0x08, BIT(2) },
>  };
>
> +static struct ccu_reset_map sun50i_h6_de3_resets[] = {
> +       [RST_MIXER0]    = { 0x08, BIT(0) },
> +       [RST_MIXER1]    = { 0x08, BIT(1) },
> +       [RST_WB]        = { 0x08, BIT(2) },
> +       [RST_ROT]       = { 0x08, BIT(3) },
> +};
> +
>  static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
>         .ccu_clks       = sun8i_a83t_de2_clks,
>         .num_ccu_clks   = ARRAY_SIZE(sun8i_a83t_de2_clks),
> @@ -186,6 +237,16 @@ static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
>         .num_resets     = ARRAY_SIZE(sun50i_a64_de2_resets),
>  };
>
> +static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = {
> +       .ccu_clks       = sun50i_h6_de3_clks,
> +       .num_ccu_clks   = ARRAY_SIZE(sun50i_h6_de3_clks),
> +
> +       .hw_clks        = &sun50i_h6_de3_hw_clks,
> +
> +       .resets         = sun50i_h6_de3_resets,
> +       .num_resets     = ARRAY_SIZE(sun50i_h6_de3_resets),
> +};
> +
>  static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
>         .ccu_clks       = sun8i_v3s_de2_clks,
>         .num_ccu_clks   = ARRAY_SIZE(sun8i_v3s_de2_clks),
> @@ -296,6 +357,10 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
>                 .compatible = "allwinner,sun50i-h5-de2-clk",
>                 .data = &sun50i_a64_de2_clk_desc,
>         },
> +       {
> +               .compatible = "allwinner,sun50i-h6-de3-clk",
> +               .data = &sun50i_h6_de3_clk_desc,
> +       },
>         { }
>  };
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.h b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
> index 530c006e0ae9..27bd88539f42 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
> @@ -22,6 +22,7 @@
>  #define CLK_MIXER0_DIV 3
>  #define CLK_MIXER1_DIV 4
>  #define CLK_WB_DIV     5
> +#define CLK_ROT_DIV    11
>
>  #define CLK_NUMBER     (CLK_WB + 1)
>
> --
> 2.18.0
>


More information about the dri-devel mailing list