[PATCH 09/10] phy: Add Cadence D-PHY support

[Laurent Pinchart]

Hi Maxime,

Thank you for the patch.

On Wednesday, 5 September 2018 12:16:40 EEST Maxime Ripard wrote:
> Cadence has designed a D-PHY that can be used by the, currently in tree,
> DSI bridge (DRM), CSI Transceiver and CSI Receiver (v4l2) drivers.
> 
> Only the DSI driver has an ad-hoc driver for that phy at the moment, while
> the v4l2 drivers are completely missing any phy support. In order to make
> that phy support available to all these drivers, without having to
> duplicate that code three times, let's create a generic phy framework
> driver.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard at bootlin.com>
> ---
>  drivers/phy/Kconfig             |   1 +-
>  drivers/phy/Makefile            |   1 +-
>  drivers/phy/cadence/Kconfig     |  13 +-
>  drivers/phy/cadence/Makefile    |   1 +-
>  drivers/phy/cadence/cdns-dphy.c | 499 +++++++++++++++++++++++++++++++++-

Should the DT bindings be split from Documentation/devicetree/bindings/
display/bridge/cdns,dsi.txt ?

>  5 files changed, 515 insertions(+)
>  create mode 100644 drivers/phy/cadence/Kconfig
>  create mode 100644 drivers/phy/cadence/Makefile
>  create mode 100644 drivers/phy/cadence/cdns-dphy.c

[snip]

-- 
Regards,

Laurent Pinchart