[PATCH 1/6] drm/bridge: use bus flags in bridge timings

[Stefan Agner]

On 07.09.2018 00:10, Linus Walleij wrote:
> On Thu, Sep 6, 2018 at 10:25 PM Stefan Agner <stefan at agner.ch> wrote:
> 
>> Ok, I read a bit up on the history of bridge timing, especially:
>> https://www.spinics.net/lists/dri-devel/msg155618.html
>>
>> IMHO, this got overengineered. For displays we do not need all that
>> setup/sample delay timing information, and much longer cables are in
>> use. So why is all that needed for bridges?
> 
> I also avoided the overhead of creating this abstraction initially.
> 
> But after doing it I have this Stockholm syndrome that I start
> liking what Laurent told me to do.
> 
>> For Linus case, the THS8134(A/B) data sheet I found (revised March 2010)
>> clearly states:
>> Clock input. A rising edge on CLK latches RPr0-7, GY0-7, BPb0-7.
>>
>> So we need to drive on negative edge, hence DRM_BUS_FLAG_PIXDATA_NEGEDGE
>> should be used, which makes the pl111 driver setting TIM2_IPC:
>> http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0121d/index.html
> 
> That is easy to say, but if I just set that up in code, even with a good
> comment it is hard for the next reader to understand what is going
> on. The central question will be, why does PL111 need to do this
> but not R-Car though they are using the same bridge?

That is something I have experienced before. Depending on drive
strength, and I guess sampling delay etc, it might sample just late
enough that signals are stable and no issues are really visible on the
screen. In those cases different cabling, changes in drive strength, or
even production variations might suddenly show artefacts though... My
point being, just because it supposedly works, does not mean that it is
right.

I did introduce the bus flags a while ago:
https://patchwork.kernel.org/patch/8254801/
https://patchwork.kernel.org/patch/8254821/

And then had to debug quite some controller and display issues around
pixel clock polarity:
https://patchwork.kernel.org/patch/8117181/
https://patchwork.kernel.org/patch/9465485/

E.g. in that last case, the pixel clock polarity flags were interpreted
wrong on both controller and display side. Hence this worked fine for
the case already upstream, but it did not work in my case...

In the end, best thing is to look on the bus. Parallel display signals
are still rather slow, and usually rather easy to scope.

PL111 needs to do this because its standard setting is driving on rising
edge. However, most displays as well as that bridge sample data on
rising edge.

I guess R-Car DU drives on negative edge by default, but can't say for
sure without hardware/data sheet.

As far as I can tell the R-Car DU driver also does not use the
DRM_BUS_FLAG_PIXDATA_*EDGE flags currently.



> 
> So this elaborate model gives a better transfer of abstract concepts
> to whoever needs to touch that code next. The code is not just
> logic, but also our map of the world and the documentation of our
> problem space.
> 
> Donald Knuth has this idea about literate programming which even
> turns the documentation/implementation process around. We are
> not there, not even remotely, but IMO the more complex the problem.
> the more we need to convey our thinking, not just our solution.

Fully agree.

My argument here is, that the map of the world (code) and the problem
are not aligned.

--
Stefan