[PATCH 03/16] dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks
jacopo mondi
jacopo at jmondi.org
Fri Sep 14 08:00:46 UTC 2018
Hi Laurent,
On Tue, Sep 04, 2018 at 03:10:14PM +0300, Laurent Pinchart wrote:
> On the D3 and E3 SoCs, the LVDS encoder can derive its internal pixel
> clock from an externally supplied clock, either through the EXTAL pin or
> through one of the DU_DOTCLKINx pins. Add corresponding clocks to the DT
> bindings.
>
> To retain backward compatibility with DT that don't specify the
> clock-names property, the functional clock must always be specified
> first, and the clock-names property is optional when only the functional
> clock is specified.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> ---
> .../devicetree/bindings/display/bridge/renesas,lvds.txt | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> index 13af7e2ac7e8..9e3913f6a643 100644
> --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> @@ -19,7 +19,17 @@ Required properties:
> - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
>
> - reg: Base address and length for the memory-mapped registers
> -- clocks: A phandle + clock-specifier pair for the functional clock
> +- clocks: A list of phandles + clock-specifier pairs, one for each entry in
> + the clock-names property.
> +- clock-names: Name of the clocks. This property is model-dependent.
> + - The functional clock is mandatory for all models, shall be listed first,
I would write
The functional clock, which is mandatory for all models, shall be listed
first and shall be named "fck".
> + and shall be named "fck".
> + - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or
> + DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be
> + named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN
> + numerical index.
Is it valid to list other clocks here for the other SoCs?
> + - When the clocks property only contains the functional clock, the
> + clock-names property may be omitted.
> - resets: A phandle + reset specifier for the module reset
Thanks
j
>
> Required nodes:
> --
> Regards,
>
> Laurent Pinchart
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20180914/85ef08a7/attachment-0001.sig>
More information about the dri-devel
mailing list