[PATCH v2 13/16] arm64: dts: renesas: r8a77990: Add display output support

[Simon Horman]

On Mon, Sep 17, 2018 at 09:50:55AM +0200, Simon Horman wrote:
> On Fri, Sep 14, 2018 at 12:10:43PM +0300, Laurent Pinchart wrote:
> > The R8A77990 (E3) platform has one RGB output and two LVDS outputs
> > connected to the DU. Add the DT nodes for the DU, LVDS encoders and
> > supporting VSP and FCP.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > Tested-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> > ---
> >  arch/arm64/boot/dts/renesas/r8a77990.dtsi | 167 ++++++++++++++++++++++++++++++
> >  1 file changed, 167 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > index abb14af76c0e..600074ca3ee5 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > @@ -537,6 +537,173 @@
> >  			resets = <&cpg 408>;
> >  		};
> 
> These nodes should be placed after the gic to preserve the sorting
> of nodes by bus address and then IP block.
> 
> > +		vspb0: vsp at fe960000 {
> > +			compatible = "renesas,vsp2";
> > +			reg = <0 0xfe960000 0 0x8000>;
> > +			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 626>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 626>;
> > +			renesas,fcp = <&fcpvb0>;
> > +		};
> > +
> > +		fcpvb0: fcp at fe96f000 {
> > +			compatible = "renesas,fcpv";
> > +			reg = <0 0xfe96f000 0 0x200>;
> > +			clocks = <&cpg CPG_MOD 607>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 607>;
> > +			iommus = <&ipmmu_vp0 5>;
> > +		};
> > +
> > +		vspi0: vsp at fe9a0000 {
> > +			compatible = "renesas,vsp2";
> > +			reg = <0 0xfe9a0000 0 0x8000>;
> > +			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 622>;
> 
> R-Car Series, 3rd Generation, v1.00, Table Table 8A.21 indicates
> that this clock should be <&cpg CPG_MOD 631>. The clock above is
> (according to my reading of the documentation) correctly
> used for vspd1 below.
> 
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 631>;
> > +			renesas,fcp = <&fcpvi0>;
> > +		};
> > +
> > +		fcpvi0: fcp at fe9af000 {
> > +			compatible = "renesas,fcpv";
> > +			reg = <0 0xfe9af000 0 0x200>;
> > +			clocks = <&cpg CPG_MOD 611>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 611>;
> > +			iommus = <&ipmmu_vp0 8>;
> > +		};
> > +
> > +		vspd0: vsp at fea20000 {
> > +			compatible = "renesas,vsp2";
> > +			reg = <0 0xfea20000 0 0x7000>;
> > +			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 623>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 623>;
> > +			renesas,fcp = <&fcpvd0>;
> > +		};
> > +
> > +		fcpvd0: fcp at fea27000 {
> > +			compatible = "renesas,fcpv";
> > +			reg = <0 0xfea27000 0 0x200>;
> > +			clocks = <&cpg CPG_MOD 603>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 603>;
> > +			iommus = <&ipmmu_vi0 8>;
> > +		};
> > +
> > +		vspd1: vsp at fea28000 {
> > +			compatible = "renesas,vsp2";
> > +			reg = <0 0xfea28000 0 0x7000>;
> > +			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 622>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 622>;
> > +			renesas,fcp = <&fcpvd1>;
> > +		};
> > +
> > +		fcpvd1: fcp at fea2f000 {
> > +			compatible = "renesas,fcpv";
> > +			reg = <0 0xfea2f000 0 0x200>;
> > +			clocks = <&cpg CPG_MOD 602>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 602>;
> > +			iommus = <&ipmmu_vi0 9>;
> > +		};
> > +
> > +		du: display at feb00000 {
> > +			compatible = "renesas,du-r8a77990";
> > +			reg = <0 0xfeb00000 0 0x80000>;
> > +			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 724>,
> > +				 <&cpg CPG_MOD 723>;
> > +			clock-names = "du.0", "du.1";
> > +			vsps = <&vspd0 0 &vspd1 0>;
> > +			status = "disabled";
> > +
> > +			ports {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				port at 0 {
> > +					reg = <0>;
> > +					du_out_rgb: endpoint {
> > +					};
> > +				};
> > +
> > +				port at 1 {
> > +					reg = <1>;
> > +					du_out_lvds0: endpoint {
> > +						remote-endpoint = <&lvds0_in>;
> > +					};
> > +				};
> > +
> > +				port at 2 {
> > +					reg = <2>;
> > +					du_out_lvds1: endpoint {
> > +						remote-endpoint = <&lvds1_in>;
> > +					};
> > +				};
> > +			};
> > +		};
> > +
> > +		lvds0: lvds-encoder at feb90000 {
> > +			compatible = "renesas,r8a77990-lvds";
> > +			reg = <0 0xfeb90000 0 0x20>;
> > +			clocks = <&cpg CPG_MOD 727>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 727>;
> > +			status = "disabled";
> > +
> > +			ports {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				port at 0 {
> > +					reg = <0>;
> > +					lvds0_in: endpoint {
> > +						remote-endpoint = <&du_out_lvds0>;
> > +					};
> > +				};
> > +
> > +				port at 1 {
> > +					reg = <1>;
> > +					lvds0_out: endpoint {
> > +					};
> > +				};
> > +			};
> > +		};
> > +
> > +		lvds1: lvds-encoder at feb90100 {
> > +			compatible = "renesas,r8a77990-lvds";
> > +			reg = <0 0xfeb90100 0 0x20>;
> > +			clocks = <&cpg CPG_MOD 727>;
> > +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +			resets = <&cpg 726>;

Also, is the missmatch between the index for the clock and reset
intentional?

> > +			status = "disabled";
> > +
> > +			ports {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				port at 0 {
> > +					reg = <0>;
> > +					lvds1_in: endpoint {
> > +						remote-endpoint = <&du_out_lvds1>;
> > +					};
> > +				};
> > +
> > +				port at 1 {
> > +					reg = <1>;
> > +					lvds1_out: endpoint {
> > +					};
> > +				};
> > +			};
> > +		};
> > +
> >  		prr: chipid at fff00044 {
> >  			compatible = "renesas,prr";
> >  			reg = <0 0xfff00044 0 4>;
> > -- 
> > Regards,
> > 
> > Laurent Pinchart
> >