[PATCH v3 0/5] drm: add support for Cadence MHDP DPI/DP bridge.

[Damian Kos]

Got it.

-depends on EXTCON=y || (EXTCON=m && DRM_ROCKCHIP=m)
+depends on DRM_ROCKCHIP=m
+select EXTCON

Damian
-----Original Message-----
From: Heiko Stuebner <heiko at sntech.de> 
Sent: Thursday, September 13, 2018 14:32
To: Damian Kos <dkos at cadence.com>
Cc: David Airlie <airlied at linux.ie>; Rob Herring <robh+dt at kernel.org>; Mark Rutland <mark.rutland at arm.com>; Archit Taneja <architt at codeaurora.org>; Andrzej Hajda <a.hajda at samsung.com>; Laurent Pinchart <Laurent.pinchart at ideasonboard.com>; Gustavo Padovan <gustavo at padovan.org>; Maarten Lankhorst <maarten.lankhorst at linux.intel.com>; Sean Paul <sean at poorly.run>; Sandy Huang <hjc at rock-chips.com>; Quentin Schulz <quentin.schulz at bootlin.com>; dri-devel at lists.freedesktop.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-rockchip at lists.infradead.org; Przemyslaw Gaj <pgaj at cadence.com>; Lukasz Tyrala <ltyrala at cadence.com>; Scott Telford <stelford at cadence.com>; Artur Jedrysek <jartur at cadence.com>; Piotr Sroka <piotrs at cadence.com>
Subject: Re: [PATCH v3 0/5] drm: add support for Cadence MHDP DPI/DP bridge.

EXTERNAL MAIL


Am Dienstag, 28. August 2018, 12:24:43 CEST schrieb Damian Kos:
> Hello!
> 
> This is the series of patches that will add support for the Cadence's 
> DPI/DP bridge. Please note that this is a preliminary version of the 
> driver and there will be more patches in the future with updates, fixes and improvements.
> Please keep that in mind when looking at FIXME/TODO/XXX comments.
> 
> Initially, MHDP driver was developed as a DRM bridge driver and was 
> planed to be placed in drivers/gpu/drm/bridge/mhdp.c.  However, there 
> was already a driver for Cadence's DP controller developed by 
> RockChip, but that driver uses the different DRM framework and looks like a part of a bigger system.
> Both controllers (including firmware) are quite different internally 
> (MST/FEC/DSC support, link training done by driver, additional 
> commands, IRQ's
> etc.) but they have similar register map, except for Framer/Streamer 
> (which is noticeably different), so they appear similar.
> 
> The following patches contain:
> - Moving common code to drivers/gpu/drm/bridge/cdns-mhdp-common.* and
>   modifying it a bit (mostly new prefixes for functions and data types) so it
>   can be used by two, higher level, drivers.
> - Modifying existing RockChip's DP driver to use the common code after changes
>   made to it (use the new cdns_mhdp_device structure and new function names).
> - Modifying DRM helpers a bit. Some are required for new driver, some are
>   updates from DP 1.2 to 1.3 or 1.4.
> - Adding documentation for device tree bindings.
> - Adding preliminary Cadence DPI/DP bridge driver.
> 
> Some of the things that will be added later on include (but are not 
> limited
> to):
> - Support for Cadence SD0801 PHY (PHY's driver should be on the way by 
> now)
> - MST support
> - DSC support
> - FEC support
> - HDCP support

with te Kconfig issue in patch5 fixed, this series tested on
rk3288 (analogix-dp) and rk3399 (analogix-dp + cadence-dp) Everything seems to work that worked before.

Tested-by: Heiko Stuebner <heiko at sntech.de>