[PATCH 21/27] drm/sun4i: Add support for H6 HDMI PHY
Chen-Yu Tsai
wens at csie.org
Sat Sep 22 15:55:35 UTC 2018
On Sun, Sep 2, 2018 at 3:28 PM Jernej Skrabec <jernej.skrabec at siol.net> wrote:
>
> H6 has Synopsys DWC HDMI 2.0 TX PHY.
>
> mpll settings were calculated from specifications of similar Synopsys
> HDMI PHY found in i.MX6. Other PHY settings were derived from BSP PHY
> driver code.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> ---
> drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 137 +++++++++++++++++++++++++
> 1 file changed, 137 insertions(+)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> index ee2bf61cd4d2..2f5499bd35ec 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> @@ -14,6 +14,122 @@
> */
> #define I2C_ADDR 0x69
>
> +static const struct dw_hdmi_mpll_config sun50i_h6_mpll_cfg[] = {
How did you choose the pixel clock points for this table? The values
sort of match up with the BSP.
> + {
> + 30666000, {
> + { 0x00b3, 0x0000 },
> + { 0x2153, 0x0000 },
> + { 0x40f3, 0x0000 },
> + },
> + }, {
> + 36800000, {
> + { 0x00b3, 0x0000 },
> + { 0x2153, 0x0000 },
> + { 0x40a2, 0x0001 },
> + },
> + }, {
> + 46000000, {
> + { 0x00b3, 0x0000 },
> + { 0x2142, 0x0001 },
> + { 0x40a2, 0x0001 },
> + },
> + }, {
> + 61333000, {
> + { 0x0072, 0x0001 },
> + { 0x2142, 0x0001 },
> + { 0x40a2, 0x0001 },
> + },
> + }, {
> + 73600000, {
> + { 0x0072, 0x0001 },
> + { 0x2142, 0x0001 },
> + { 0x4061, 0x0002 },
> + },
> + }, {
> + 92000000, {
> + { 0x0072, 0x0001 },
> + { 0x2145, 0x0002 },
> + { 0x4061, 0x0002 },
> + },
> + }, {
> + 122666000, {
> + { 0x0051, 0x0002 },
> + { 0x2145, 0x0002 },
> + { 0x4061, 0x0002 },
> + },
> + }, {
> + 147200000, {
> + { 0x0051, 0x0002 },
> + { 0x2145, 0x0002 },
> + { 0x4064, 0x0003 },
> + },
> + }, {
> + 184000000, {
> + { 0x0051, 0x0002 },
> + { 0x214c, 0x0003 },
> + { 0x4064, 0x0003 },
> + },
> + }, {
> + 226666000, {
> + { 0x0040, 0x0003 },
> + { 0x214c, 0x0003 },
> + { 0x4064, 0x0003 },
> + },
> + }, {
> + 272000000, {
> + { 0x0040, 0x0003 },
> + { 0x214c, 0x0003 },
> + { 0x5a64, 0x0003 },
> + },
> + }, {
> + 340000000, {
> + { 0x0040, 0x0003 },
> + { 0x3b4c, 0x0003 },
> + { 0x5a64, 0x0003 },
> + },
> + }, {
> + 600000000, {
594000000 is the proper clock rate.
> + { 0x1a40, 0x0003 },
> + { 0x3b4c, 0x0003 },
> + { 0x5a64, 0x0003 },
> + },
> + }, {
> + ~0UL, {
> + { 0x0000, 0x0000 },
> + { 0x0000, 0x0000 },
> + { 0x0000, 0x0000 },
> + },
> + }
> +};
> +
> +static const struct dw_hdmi_curr_ctrl sun50i_h6_cur_ctr[] = {
The BSP sometimes uses different settings depending on the pixel repetition.
Any ideas about this? I assume it's because the TMDS clock changes as a
result of pixel repetition, as is the same with different bit depths.
> + /* pixelclk bpp8 bpp10 bpp12 */
> + { 25175000, { 0x0000, 0x0000, 0x0000 }, },
> + { 27000000, { 0x0012, 0x0000, 0x0000 }, },
> + { 59400000, { 0x0008, 0x0008, 0x0008 }, },
> + { 72000000, { 0x0008, 0x0008, 0x001b }, },
> + { 74250000, { 0x0013, 0x0013, 0x0013 }, },
> + { 90000000, { 0x0008, 0x001a, 0x001b }, },
> + { 118800000, { 0x001b, 0x001a, 0x001b }, },
> + { 144000000, { 0x001b, 0x001a, 0x0034 }, },
> + { 180000000, { 0x001b, 0x0033, 0x0034 }, },
> + { 216000000, { 0x0036, 0x0033, 0x0034 }, },
> + { 237600000, { 0x0036, 0x0033, 0x001b }, },
> + { 288000000, { 0x0036, 0x001b, 0x001b }, },
> + { 297000000, { 0x0019, 0x001b, 0x0019 }, },
> + { 330000000, { 0x0036, 0x001b, 0x001b }, },
> + { 600000000, { 0x003f, 0x001b, 0x001b }, },
> + { ~0UL, { 0x0000, 0x0000, 0x0000 }, }
> +};
> +
> +static const struct dw_hdmi_phy_config sun50i_h6_phy_config[] = {
> + /*pixelclk symbol term vlev*/
I see a slightly different setting for 27000000, and this frequency
below 74250000
only, and even different for all three bit depths (not listed here). So:
{ 25175000, 0x8009, 0x0004, 0x0232 },
{ 27000000, 0x8009, 0x0007, 0x02b0 },
And,
> + { 74250000, 0x8009, 0x0004, 0x0232},
> + { 148500000, 0x8029, 0x0004, 0x0273},
These two don't match what I see in the BSP. BTW, which table did you use?
phy301 or phy303? The code seems to indicate that model 301 is the one.
> + { 600000000, 0x8039, 0x0004, 0x014a},
594000000 is the proper pixel clock you're after.
> + { ~0UL, 0x0000, 0x0000, 0x0000}
> +};
> +
> static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
> struct sun8i_hdmi_phy *phy,
> unsigned int clk_rate)
> @@ -290,6 +406,16 @@ static void sun8i_hdmi_phy_unlock(struct sun8i_hdmi_phy *phy)
> SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
> }
>
> +static void sun50i_hdmi_phy_init_h6(struct sun8i_hdmi_phy *phy)
> +{
> + regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
> + SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
> + SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
> +
> + regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
> + 0xffff0000, 0x80c00000);
> +}
> +
> static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
> {
> sun8i_hdmi_phy_unlock(phy);
> @@ -423,6 +549,13 @@ static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = {
> .phy_config = &sun8i_hdmi_phy_config_h3,
> };
>
> +static const struct sun8i_hdmi_phy_variant sun50i_h6_hdmi_phy = {
> + .cur_ctr = sun50i_h6_cur_ctr,
> + .mpll_cfg = sun50i_h6_mpll_cfg,
> + .phy_cfg = sun50i_h6_phy_config,
> + .phy_init = &sun50i_hdmi_phy_init_h6,
> +};
> +
> static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
> .is_custom_phy = true,
> .phy_init = &sun8i_hdmi_phy_init_a83t,
> @@ -443,6 +576,10 @@ static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
> .compatible = "allwinner,sun50i-a64-hdmi-phy",
> .data = &sun50i_a64_hdmi_phy,
> },
> + {
> + .compatible = "allwinner,sun50i-h6-hdmi-phy",
> + .data = &sun50i_h6_hdmi_phy,
> + },
Version sort please.
Regards
ChenYu
> {
> .compatible = "allwinner,sun8i-a83t-hdmi-phy",
> .data = &sun8i_a83t_hdmi_phy,
> --
> 2.18.0
>
On Sun, Sep 2, 2018 at 3:28 PM Jernej Skrabec <jernej.skrabec at siol.net> wrote:
>
> H6 has Synopsys DWC HDMI 2.0 TX PHY.
>
> mpll settings were calculated from specifications of similar Synopsys
> HDMI PHY found in i.MX6. Other PHY settings were derived from BSP PHY
> driver code.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> ---
> drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 137 +++++++++++++++++++++++++
> 1 file changed, 137 insertions(+)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> index ee2bf61cd4d2..2f5499bd35ec 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> @@ -14,6 +14,122 @@
> */
> #define I2C_ADDR 0x69
>
> +static const struct dw_hdmi_mpll_config sun50i_h6_mpll_cfg[] = {
> + {
> + 30666000, {
> + { 0x00b3, 0x0000 },
> + { 0x2153, 0x0000 },
> + { 0x40f3, 0x0000 },
> + },
> + }, {
> + 36800000, {
> + { 0x00b3, 0x0000 },
> + { 0x2153, 0x0000 },
> + { 0x40a2, 0x0001 },
> + },
> + }, {
> + 46000000, {
> + { 0x00b3, 0x0000 },
> + { 0x2142, 0x0001 },
> + { 0x40a2, 0x0001 },
> + },
> + }, {
> + 61333000, {
> + { 0x0072, 0x0001 },
> + { 0x2142, 0x0001 },
> + { 0x40a2, 0x0001 },
> + },
> + }, {
> + 73600000, {
> + { 0x0072, 0x0001 },
> + { 0x2142, 0x0001 },
> + { 0x4061, 0x0002 },
> + },
> + }, {
> + 92000000, {
> + { 0x0072, 0x0001 },
> + { 0x2145, 0x0002 },
> + { 0x4061, 0x0002 },
> + },
> + }, {
> + 122666000, {
> + { 0x0051, 0x0002 },
> + { 0x2145, 0x0002 },
> + { 0x4061, 0x0002 },
> + },
> + }, {
> + 147200000, {
> + { 0x0051, 0x0002 },
> + { 0x2145, 0x0002 },
> + { 0x4064, 0x0003 },
> + },
> + }, {
> + 184000000, {
> + { 0x0051, 0x0002 },
> + { 0x214c, 0x0003 },
> + { 0x4064, 0x0003 },
> + },
> + }, {
> + 226666000, {
> + { 0x0040, 0x0003 },
> + { 0x214c, 0x0003 },
> + { 0x4064, 0x0003 },
> + },
> + }, {
> + 272000000, {
> + { 0x0040, 0x0003 },
> + { 0x214c, 0x0003 },
> + { 0x5a64, 0x0003 },
> + },
> + }, {
> + 340000000, {
> + { 0x0040, 0x0003 },
> + { 0x3b4c, 0x0003 },
> + { 0x5a64, 0x0003 },
> + },
> + }, {
> + 600000000, {
> + { 0x1a40, 0x0003 },
> + { 0x3b4c, 0x0003 },
> + { 0x5a64, 0x0003 },
> + },
> + }, {
> + ~0UL, {
> + { 0x0000, 0x0000 },
> + { 0x0000, 0x0000 },
> + { 0x0000, 0x0000 },
> + },
> + }
> +};
> +
> +static const struct dw_hdmi_curr_ctrl sun50i_h6_cur_ctr[] = {
> + /* pixelclk bpp8 bpp10 bpp12 */
> + { 25175000, { 0x0000, 0x0000, 0x0000 }, },
> + { 27000000, { 0x0012, 0x0000, 0x0000 }, },
> + { 59400000, { 0x0008, 0x0008, 0x0008 }, },
> + { 72000000, { 0x0008, 0x0008, 0x001b }, },
> + { 74250000, { 0x0013, 0x0013, 0x0013 }, },
> + { 90000000, { 0x0008, 0x001a, 0x001b }, },
> + { 118800000, { 0x001b, 0x001a, 0x001b }, },
> + { 144000000, { 0x001b, 0x001a, 0x0034 }, },
> + { 180000000, { 0x001b, 0x0033, 0x0034 }, },
> + { 216000000, { 0x0036, 0x0033, 0x0034 }, },
> + { 237600000, { 0x0036, 0x0033, 0x001b }, },
> + { 288000000, { 0x0036, 0x001b, 0x001b }, },
> + { 297000000, { 0x0019, 0x001b, 0x0019 }, },
> + { 330000000, { 0x0036, 0x001b, 0x001b }, },
> + { 600000000, { 0x003f, 0x001b, 0x001b }, },
> + { ~0UL, { 0x0000, 0x0000, 0x0000 }, }
> +};
> +
> +static const struct dw_hdmi_phy_config sun50i_h6_phy_config[] = {
> + /*pixelclk symbol term vlev*/
> + { 74250000, 0x8009, 0x0004, 0x0232},
> + { 148500000, 0x8029, 0x0004, 0x0273},
> + { 600000000, 0x8039, 0x0004, 0x014a},
> + { ~0UL, 0x0000, 0x0000, 0x0000}
> +};
> +
> static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
> struct sun8i_hdmi_phy *phy,
> unsigned int clk_rate)
> @@ -290,6 +406,16 @@ static void sun8i_hdmi_phy_unlock(struct sun8i_hdmi_phy *phy)
> SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
> }
>
> +static void sun50i_hdmi_phy_init_h6(struct sun8i_hdmi_phy *phy)
> +{
> + regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
> + SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
> + SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
> +
> + regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
> + 0xffff0000, 0x80c00000);
> +}
> +
> static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
> {
> sun8i_hdmi_phy_unlock(phy);
> @@ -423,6 +549,13 @@ static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = {
> .phy_config = &sun8i_hdmi_phy_config_h3,
> };
>
> +static const struct sun8i_hdmi_phy_variant sun50i_h6_hdmi_phy = {
> + .cur_ctr = sun50i_h6_cur_ctr,
> + .mpll_cfg = sun50i_h6_mpll_cfg,
> + .phy_cfg = sun50i_h6_phy_config,
> + .phy_init = &sun50i_hdmi_phy_init_h6,
> +};
> +
> static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
> .is_custom_phy = true,
> .phy_init = &sun8i_hdmi_phy_init_a83t,
> @@ -443,6 +576,10 @@ static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
> .compatible = "allwinner,sun50i-a64-hdmi-phy",
> .data = &sun50i_a64_hdmi_phy,
> },
> + {
> + .compatible = "allwinner,sun50i-h6-hdmi-phy",
> + .data = &sun50i_h6_hdmi_phy,
> + },
> {
> .compatible = "allwinner,sun8i-a83t-hdmi-phy",
> .data = &sun8i_a83t_hdmi_phy,
> --
> 2.18.0
>
More information about the dri-devel
mailing list