[PATCH v2 06/16] drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get()

[Ulrich Hecht]

Thank you for your patch.

> On September 14, 2018 at 11:10 AM Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com> wrote:
> 
> 
> The rcar_du_crtc_get() function is always immediately followed by a call
> to rcar_du_crtc_setup(). Call the later from the former to simplify the
> code, and add a comment to explain how the get and put calls are
> balanced.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> Tested-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 107 +++++++++++++++++----------------
>  1 file changed, 56 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index 6288b9ad9e24..c89751c26f9c 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -66,39 +66,6 @@ static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg,
>  	rcar_du_write(rcdu, rcrtc->mmio_offset + reg, (value & ~clr) | set);
>  }
>  
> -static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
> -{
> -	int ret;
> -
> -	ret = clk_prepare_enable(rcrtc->clock);
> -	if (ret < 0)
> -		return ret;
> -
> -	ret = clk_prepare_enable(rcrtc->extclock);
> -	if (ret < 0)
> -		goto error_clock;
> -
> -	ret = rcar_du_group_get(rcrtc->group);
> -	if (ret < 0)
> -		goto error_group;
> -
> -	return 0;
> -
> -error_group:
> -	clk_disable_unprepare(rcrtc->extclock);
> -error_clock:
> -	clk_disable_unprepare(rcrtc->clock);
> -	return ret;
> -}
> -
> -static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
> -{
> -	rcar_du_group_put(rcrtc->group);
> -
> -	clk_disable_unprepare(rcrtc->extclock);
> -	clk_disable_unprepare(rcrtc->clock);
> -}
> -
>  /* -----------------------------------------------------------------------------
>   * Hardware Setup
>   */
> @@ -546,6 +513,51 @@ static void rcar_du_crtc_setup(struct rcar_du_crtc *rcrtc)
>  	drm_crtc_vblank_on(&rcrtc->crtc);
>  }
>  
> +static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
> +{
> +	int ret;
> +
> +	/*
> +	 * Guard against double-get, as the function is called from both the
> +	 * .atomic_enable() and .atomic_begin() handlers.
> +	 */
> +	if (rcrtc->initialized)
> +		return 0;
> +
> +	ret = clk_prepare_enable(rcrtc->clock);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = clk_prepare_enable(rcrtc->extclock);
> +	if (ret < 0)
> +		goto error_clock;
> +
> +	ret = rcar_du_group_get(rcrtc->group);
> +	if (ret < 0)
> +		goto error_group;
> +
> +	rcar_du_crtc_setup(rcrtc);
> +	rcrtc->initialized = true;
> +
> +	return 0;
> +
> +error_group:
> +	clk_disable_unprepare(rcrtc->extclock);
> +error_clock:
> +	clk_disable_unprepare(rcrtc->clock);
> +	return ret;
> +}
> +
> +static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
> +{
> +	rcar_du_group_put(rcrtc->group);
> +
> +	clk_disable_unprepare(rcrtc->extclock);
> +	clk_disable_unprepare(rcrtc->clock);
> +
> +	rcrtc->initialized = false;
> +}
> +
>  static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
>  {
>  	bool interlaced;
> @@ -639,16 +651,7 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
>  {
>  	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
>  
> -	/*
> -	 * If the CRTC has already been setup by the .atomic_begin() handler we
> -	 * can skip the setup stage.
> -	 */
> -	if (!rcrtc->initialized) {
> -		rcar_du_crtc_get(rcrtc);
> -		rcar_du_crtc_setup(rcrtc);
> -		rcrtc->initialized = true;
> -	}
> -
> +	rcar_du_crtc_get(rcrtc);
>  	rcar_du_crtc_start(rcrtc);
>  }
>  
> @@ -667,7 +670,6 @@ static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc,
>  	}
>  	spin_unlock_irq(&crtc->dev->event_lock);
>  
> -	rcrtc->initialized = false;
>  	rcrtc->outputs = 0;
>  }
>  
> @@ -680,14 +682,17 @@ static void rcar_du_crtc_atomic_begin(struct drm_crtc *crtc,
>  
>  	/*
>  	 * If a mode set is in progress we can be called with the CRTC disabled.
> -	 * We then need to first setup the CRTC in order to configure planes.
> -	 * The .atomic_enable() handler will notice and skip the CRTC setup.
> +	 * We thus need to first get and setup the CRTC in order to configure
> +	 * planes. We must *not* put the CRTC in .atomic_flush(), as it must be
> +	 * kept awake until the .atomic_enable() call that will follow. The get
> +	 * operation in .atomic_enable() will in that case be a no-op, and the
> +	 * CRTC will be put later in .atomic_disable().
> +	 *
> +	 * If a mode set is not in progress the CRTC is enabled, and the
> +	 * following get call will be a no-op. There is thus no need to belance

*balance

> +	 * it in .atomic_flush() either.
>  	 */
> -	if (!rcrtc->initialized) {
> -		rcar_du_crtc_get(rcrtc);
> -		rcar_du_crtc_setup(rcrtc);
> -		rcrtc->initialized = true;
> -	}
> +	rcar_du_crtc_get(rcrtc);
>  
>  	if (rcar_du_has(rcrtc->group->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
>  		rcar_du_vsp_atomic_begin(rcrtc);
> -- 
> Regards,
> 
> Laurent Pinchart
>

With typo fixed:
Reviewed-by: Ulrich Hecht <uli+renesas at fpond.eu>

CU
Uli