[PATCH 10/12] drm/panel: Add Bananapi S070WV20-CT16 MIPI-DSI panel driver
Chen-Yu Tsai
wens at csie.org
Fri Sep 28 04:32:02 UTC 2018
On Thu, Sep 27, 2018 at 7:50 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> Bananapi S070WV20-CT16 is 800x480, 4-lane MIPI-DSI panel which
> can be used to connect via BPI-M64 board, so add a driver for it.
>
> The same panel PCB comes with parallel RBG which is supported via
> panel-simple driver with "bananapi,s070wv20-ct16" compatible.
As I mentioned before, this PCB uses a ICN6211 MIPI-DSI to RGB bridge.
Please model it as such.
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-bananapi-s070wv20.c | 336 ++++++++++++++++++
> 3 files changed, 346 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-bananapi-s070wv20.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 6020c30a33b3..d25960a63b10 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -17,6 +17,15 @@ config DRM_PANEL_ARM_VERSATILE
> reference designs. The panel is detected using special registers
> in the Versatile family syscon registers.
>
> +config DRM_PANEL_BANANAPI_S070WV20
> + tristate "Bananapi S070WV20-CT16 MIPI-DSI panel driver"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y if you want to enable support for panels based on the
> + Bananapi S070WV20-CT16 MIPI-DSI controller.
> +
> config DRM_PANEL_LVDS
> tristate "Generic LVDS panel driver"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 5ccaaa9d13af..345b6475d3a4 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
> +obj-$(CONFIG_DRM_PANEL_BANANAPI_S070WV20) += panel-bananapi-s070wv20.o
> obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
> obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
> diff --git a/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c
> new file mode 100644
> index 000000000000..6c9adbec6dd8
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c
> @@ -0,0 +1,336 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2018 Amarula Solutions
> + * Author: Jagan Teki <jagan at amarulasolutions.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/fb.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#include <video/mipi_display.h>
> +
> +struct s070wv20 {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> +
> + struct backlight_device *backlight;
> + struct regulator *dvdd;
> + struct regulator *avdd;
> + struct gpio_desc *reset;
> +
> + bool is_enabled;
> + bool is_prepared;
> +};
> +
> +static inline struct s070wv20 *panel_to_s070wv20(struct drm_panel *panel)
> +{
> + return container_of(panel, struct s070wv20, panel);
> +}
> +
> +struct s070wv20_init_cmd {
> + size_t len;
> + const char *data;
> +};
> +
> +#define S070WV20_INIT_CMD(...) { \
> + .len = sizeof((char[]){__VA_ARGS__}), \
> + .data = (char[]){__VA_ARGS__} }
> +
Using the timings from below, and comparing with
https://shiminblog.github.io/mipi-to-rgb-lcd/
> +static const struct s070wv20_init_cmd s070wv20_init_cmds[] = {
> + S070WV20_INIT_CMD(0x7A, 0xC1),
> + S070WV20_INIT_CMD(0x20, 0x20),
This is likely the lower 8 bits of .hdisplay.
> + S070WV20_INIT_CMD(0x21, 0xE0),
Lower 8 bits of .vdisplay
> + S070WV20_INIT_CMD(0x22, 0x13),
Might be ((.hdisplay >> 8) & 0xf | (.vdisplay >> 8) & 0xf) << 4).
> + S070WV20_INIT_CMD(0x23, 0x28),
HFP, or horizontal front porch. 40 in this case.
> + S070WV20_INIT_CMD(0x24, 0x30),
HSYNC, or horizontal sync pulse length. 48 in this case.
> + S070WV20_INIT_CMD(0x25, 0x28),
HBP, or horizontal back porch. 40 in this case.
> + S070WV20_INIT_CMD(0x26, 0x00),
Unknown. Possibly RGB phase shift?
> + S070WV20_INIT_CMD(0x27, 0x0D),
VFP, or vertical front porch. 13 in this case.
> + S070WV20_INIT_CMD(0x28, 0x03),
This might be VSYNC, judging from the grouping. 3 in this case.
> + S070WV20_INIT_CMD(0x29, 0x1D),
VBP, or vertical back porch. 29 in this case.
> + S070WV20_INIT_CMD(0x34, 0x80),
> + S070WV20_INIT_CMD(0x36, 0x28),
> + S070WV20_INIT_CMD(0xB5, 0xA0),
> + S070WV20_INIT_CMD(0x5C, 0xFF),
> + S070WV20_INIT_CMD(0x2A, 0x01),
> + S070WV20_INIT_CMD(0x56, 0x92),
> + S070WV20_INIT_CMD(0x6B, 0x71),
> + S070WV20_INIT_CMD(0x69, 0x2B),
> + S070WV20_INIT_CMD(0x10, 0x40),
> + S070WV20_INIT_CMD(0x11, 0x98),
This might be related to number of MIPI lanes. I saw 0x88 for 2-lane devices.
> + S070WV20_INIT_CMD(0xB6, 0x20),
> + S070WV20_INIT_CMD(0x51, 0x20),
> + S070WV20_INIT_CMD(0x09, 0x10),
The last three seem standardized across all ICN6211 drivers I could
find on github.
Other drivers / init sequences I found:
https://github.com/yesnoandor/x300/blob/master/kernel/arch/arm/boot/dts/erobbing/x300/x300.dtsi#L81
https://github.com/wxzed/Raspberry_5MIPI_Display/blob/master/I2C_Slave/USER/main.c#L15
https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/drivers/video/msm/mdss/mdss_i2c_interface.c#L152
matches timings for
https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/arch/arm/boot/dts/qcom/dsi-mipi-2-rgb_1280p_video.dtsi#L20
https://github.com/zestroly/micromat/blob/master/test/raspberry/ICN6211.cpp#L169
I also reached out to Bananapi to see if they have more information on
this chip.
ChenYu
> +};
> +
> +static int s070wv20_prepare(struct drm_panel *panel)
> +{
> + struct s070wv20 *ctx = panel_to_s070wv20(panel);
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + unsigned int i;
> + int ret;
> +
> + if (ctx->is_prepared)
> + return 0;
> +
> + msleep(50);
> +
> + gpiod_set_value(ctx->reset, 1);
> + msleep(50);
> +
> + gpiod_set_value(ctx->reset, 0);
> + msleep(50);
> +
> + gpiod_set_value(ctx->reset, 1);
> + msleep(20);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(120);
> +
> + for (i = 0; i < ARRAY_SIZE(s070wv20_init_cmds); i++) {
> + const struct s070wv20_init_cmd *cmd = &s070wv20_init_cmds[i];
> +
> + ret = mipi_dsi_generic_write(dsi, cmd->data, cmd->len);
> + if (ret < 0)
> + return ret;
> +
> + msleep(10);
> + }
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to set display on: %d\n", ret);
> + return ret;
> + }
> +
> + ctx->is_prepared = true;
> +
> + return 0;
> +}
> +
> +static int s070wv20_enable(struct drm_panel *panel)
> +{
> + struct s070wv20 *ctx = panel_to_s070wv20(panel);
> +
> + if (ctx->is_enabled)
> + return 0;
> +
> + msleep(120);
> +
> + backlight_enable(ctx->backlight);
> + ctx->is_enabled = true;
> +
> + return 0;
> +}
> +
> +static int s070wv20_disable(struct drm_panel *panel)
> +{
> + struct s070wv20 *ctx = panel_to_s070wv20(panel);
> +
> + if (!ctx->is_enabled)
> + return 0;
> +
> + backlight_disable(ctx->backlight);
> + ctx->is_enabled = false;
> +
> + return 0;
> +}
> +
> +static int s070wv20_unprepare(struct drm_panel *panel)
> +{
> + struct s070wv20 *ctx = panel_to_s070wv20(panel);
> + int ret;
> +
> + if (!ctx->is_prepared)
> + return 0;
> +
> + ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
> + if (ret < 0)
> + dev_err(panel->dev, "failed to set display off: %d\n", ret);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
> + if (ret < 0)
> + dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
> +
> + msleep(100);
> +
> + regulator_disable(ctx->avdd);
> +
> + regulator_disable(ctx->dvdd);
> +
> + gpiod_set_value(ctx->reset, 0);
> +
> + gpiod_set_value(ctx->reset, 1);
> +
> + gpiod_set_value(ctx->reset, 0);
> +
> + ctx->is_prepared = false;
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode s070wv20_default_mode = {
> + .clock = 30000,
> + .vrefresh = 60,
> +
> + .hdisplay = 800,
> + .hsync_start = 800 + 40,
> + .hsync_end = 800 + 40 + 48,
> + .htotal = 800 + 40 + 48 + 40,
> +
> + .vdisplay = 480,
> + .vsync_start = 480 + 13,
> + .vsync_end = 480 + 13 + 3,
> + .vtotal = 480 + 13 + 3 + 29,
> +};
> +
> +static int s070wv20_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct s070wv20 *ctx = panel_to_s070wv20(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &s070wv20_default_mode);
> + if (!mode) {
> + dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n",
> + s070wv20_default_mode.hdisplay,
> + s070wv20_default_mode.vdisplay,
> + s070wv20_default_mode.vrefresh);
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(connector, mode);
> +
> + panel->connector->display_info.width_mm = 86;
> + panel->connector->display_info.height_mm = 154;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs s070wv20_funcs = {
> + .disable = s070wv20_disable,
> + .unprepare = s070wv20_unprepare,
> + .prepare = s070wv20_prepare,
> + .enable = s070wv20_enable,
> + .get_modes = s070wv20_get_modes,
> +};
> +
> +static int s070wv20_dsi_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device_node *np;
> + struct s070wv20 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> + mipi_dsi_set_drvdata(dsi, ctx);
> + ctx->dsi = dsi;
> +
> + drm_panel_init(&ctx->panel);
> + ctx->panel.dev = &dsi->dev;
> + ctx->panel.funcs = &s070wv20_funcs;
> +
> + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd");
> + if (IS_ERR(ctx->dvdd)) {
> + dev_err(&dsi->dev, "Couldn't get dvdd regulator\n");
> + return PTR_ERR(ctx->dvdd);
> + }
> +
> + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd");
> + if (IS_ERR(ctx->avdd)) {
> + dev_err(&dsi->dev, "Couldn't get avdd regulator\n");
> + return PTR_ERR(ctx->avdd);
> + }
> +
> + ret = regulator_enable(ctx->dvdd);
> + if (ret)
> + return ret;
> +
> + msleep(5);
> +
> + ret = regulator_enable(ctx->avdd);
> + if (ret)
> + return ret;
> +
> + msleep(5);
> +
> + ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset)) {
> + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
> + return PTR_ERR(ctx->reset);
> + }
> +
> + np = of_parse_phandle(dsi->dev.of_node, "backlight", 0);
> + if (np) {
> + ctx->backlight = of_find_backlight_by_node(np);
> + of_node_put(np);
> +
> + if (!ctx->backlight)
> + return -EPROBE_DEFER;
> + }
> +
> + ret = drm_panel_add(&ctx->panel);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->lanes = 4;
> +
> + return mipi_dsi_attach(dsi);
> +}
> +
> +static int s070wv20_dsi_remove(struct mipi_dsi_device *dsi)
> +{
> + struct s070wv20 *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_panel_remove(&ctx->panel);
> +
> + if (ctx->backlight)
> + put_device(&ctx->backlight->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id s070wv20_of_match[] = {
> + { .compatible = "bananapi,s070wv20-ct16-dsi", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, s070wv20_of_match);
> +
> +static struct mipi_dsi_driver s070wv20_driver = {
> + .probe = s070wv20_dsi_probe,
> + .remove = s070wv20_dsi_remove,
> + .driver = {
> + .name = "bananapi-s070wv20-ct16-dsi",
> + .of_match_table = s070wv20_of_match,
> + },
> +};
> +module_mipi_dsi_driver(s070wv20_driver);
> +
> +MODULE_AUTHOR("Jagan Teki <jagan at amarulasolutions.com>");
> +MODULE_DESCRIPTION("Bananapi S070WV20-CT16 MIPI-DSI");
> +MODULE_LICENSE("GPL v2");
> --
> 2.18.0.321.gffc6fa0e3
>
More information about the dri-devel
mailing list