[PATCH] drm/bridge: ti-tfp410: Fall back to HPD polling if HPD irq is not available

[Peter Ujfalusi]

In case either the HPD gpio is not specified or when the HPD gpio can not
be used as interrupt we should tell the core that the HPD needs to be
polled for detecting hotplug.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 drivers/gpu/drm/bridge/ti-tfp410.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index 285be4a0f4bd..6fc831eb3804 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -31,6 +31,7 @@ struct tfp410 {
 
 	struct i2c_adapter	*ddc;
 	struct gpio_desc	*hpd;
+	int			hpd_irq;
 	struct delayed_work	hpd_work;
 	struct gpio_desc	*powerdown;
 
@@ -124,8 +125,10 @@ static int tfp410_attach(struct drm_bridge *bridge)
 		return -ENODEV;
 	}
 
-	if (dvi->hpd)
+	if (dvi->hpd_irq >= 0)
 		dvi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
 
 	drm_connector_helper_add(&dvi->connector,
 				 &tfp410_con_helper_funcs);
@@ -324,10 +327,15 @@ static int tfp410_init(struct device *dev, bool i2c)
 		return PTR_ERR(dvi->powerdown);
 	}
 
-	if (dvi->hpd) {
+	if (dvi->hpd)
+		dvi->hpd_irq = gpiod_to_irq(dvi->hpd);
+	else
+		dvi->hpd_irq = -ENXIO;
+
+	if (dvi->hpd_irq >= 0) {
 		INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
 
-		ret = devm_request_threaded_irq(dev, gpiod_to_irq(dvi->hpd),
+		ret = devm_request_threaded_irq(dev, dvi->hpd_irq,
 			NULL, tfp410_hpd_irq_thread, IRQF_TRIGGER_RISING |
 			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 			"hdmi-hpd", dvi);
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki