[PATCH 1/2] dt-bindings: display: tfp410: Add bus-width parameter property
Peter Ujfalusi
peter.ujfalusi at ti.com
Mon Apr 1 12:41:42 UTC 2019
tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or
12bit, dual-edge (12 lines).
Add bus-width to the documentation so it can be used to select between the
two connection scheme.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
.../devicetree/bindings/display/bridge/ti,tfp410.txt | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
index 3f903af93949..5ff4f64ef8e8 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
@@ -18,7 +18,14 @@ This device has two video ports. Their connections are modeled using the OF
graph bindings specified in [1]. Each port node shall have a single endpoint.
- Port 0 is the DPI input port. Its endpoint subnode shall contain a
- pclk-sample property and a remote-endpoint property as specified in [1].
+ pclk-sample and bus-width property and a remote-endpoint property as specified
+ in [1].
+ - If pclk-sample is not defined, pclk-sample = 0 should be assumed for
+ backward compatibility.
+ - If bus-width is not defined then bus-width = 24 should be assumed for
+ backward compatibility.
+ bus-width = 24: 24 data lines are connected and single-edge mode
+ bus-width = 12: 12 data lines are connected and dual-edge mode
- Port 1 is the DVI output port. Its endpoint subnode shall contain a
remote-endpoint property is specified in [1].
@@ -43,6 +50,7 @@ tfp410: encoder at 0 {
tfp410_in: endpoint at 0 {
pclk-sample = <1>;
+ bus-width = <24>;
remote-endpoint = <&dpi_out>;
};
};
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the dri-devel
mailing list