[PATCH v1 2/5] drm/stm: dw_mipi_dsi-stm: add support of an optional regulator

Philippe CORNU philippe.cornu at st.com
Fri Apr 5 16:34:35 UTC 2019



On 4/3/19 10:16 AM, Yannick Fertré wrote:
> Add support of an optional regulator for the phy part of the DSI
> controller.
> 
> Signed-off-by: Yannick Fertré <yannick.fertre at st.com>
> ---
>   drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> index a672b59..84703d0 100644
> --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> @@ -9,6 +9,7 @@
>   #include <linux/clk.h>
>   #include <linux/iopoll.h>
>   #include <linux/module.h>
> +#include <linux/regulator/consumer.h>
>   #include <drm/drmP.h>
>   #include <drm/drm_mipi_dsi.h>
>   #include <drm/bridge/dw_mipi_dsi.h>
> @@ -76,6 +77,7 @@ struct dw_mipi_dsi_stm {
>   	u32 hw_version;
>   	int lane_min_kbps;
>   	int lane_max_kbps;
> +	struct regulator *vdd_supply;
>   };
>   
>   static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
> @@ -318,16 +320,32 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>   		return PTR_ERR(dsi->base);
>   	}
>   
> +	dsi->vdd_supply = devm_regulator_get_optional(dev, "phy-dsi");
> +	if (IS_ERR(dsi->vdd_supply)) {
> +		ret = PTR_ERR(dsi->vdd_supply);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "failed to request regulator: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = regulator_enable(dsi->vdd_supply);
> +	if (ret) {
> +		dev_err(dev, "failed to enable regulator: %d\n", ret);
> +		return ret;
> +	}
> +
>   	dsi->pllref_clk = devm_clk_get(dev, "ref");
>   	if (IS_ERR(dsi->pllref_clk)) {
>   		ret = PTR_ERR(dsi->pllref_clk);
>   		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
> +		regulator_disable(dsi->vdd_supply);
>   		return ret;
>   	}
>   
>   	ret = clk_prepare_enable(dsi->pllref_clk);
>   	if (ret) {
>   		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> +		regulator_disable(dsi->vdd_supply);
>   		return ret;
>   	}
>   
> @@ -339,6 +357,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>   	dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
>   	if (IS_ERR(dsi->dsi)) {
>   		DRM_ERROR("Failed to initialize mipi dsi host\n");
> +		regulator_disable(dsi->vdd_supply);
>   		clk_disable_unprepare(dsi->pllref_clk);
>   		return PTR_ERR(dsi->dsi);
>   	}
> @@ -351,6 +370,7 @@ static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
>   	struct dw_mipi_dsi_stm *dsi = platform_get_drvdata(pdev);
>   
>   	clk_disable_unprepare(dsi->pllref_clk);
> +	regulator_disable(dsi->vdd_supply);

Dear Yannick,

Acked-by: Philippe Cornu <philippe.cornu at st.com>

Philippe

>   	dw_mipi_dsi_remove(dsi->dsi);
>   
>   	return 0;
> 


More information about the dri-devel mailing list