[PATCH 04/12] arm64: dts: allwinner: orange-pi-3: Enable HDMI output

[Maxime Ripard]

On Sat, Apr 06, 2019 at 01:45:06AM +0200, megous at megous.com wrote:
> From: Ondrej Jirman <megous at megous.com>
>
> Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables
> the DDC I2C bus. Before EDID can be read, we need to pull PH2 high.
>
> Signed-off-by: Ondrej Jirman <megous at megous.com>
> ---
>  .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 35 +++++++++++++++++++
>  1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> index 7a2424fcaed7..644946749088 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> @@ -21,6 +21,17 @@
>  		stdout-path = "serial0:115200n8";
>  	};
>
> +	connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_in: endpoint {
> +				remote-endpoint = <&hdmi_out_con>;
> +			};
> +		};
> +	};
> +
>  	leds {
>  		compatible = "gpio-leds";
>
> @@ -36,6 +47,15 @@
>  		};
>  	};
>
> +	reg_ddc: ddc-io {
> +                compatible = "regulator-fixed";
> +                regulator-name = "ddc-io";
> +                regulator-min-microvolt = <5000000>;
> +                regulator-max-microvolt = <5000000>;
> +                enable-active-high;
> +                gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> +        };
> +

This is indented with spaces and generates checkpatch warnings.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20190408/a5ae36a4/attachment-0001.sig>