[PATCH RFC tip/core/rcu 0/4] Forbid static SRCU use in modules

Joel Fernandes joel at joelfernandes.org
Tue Apr 9 15:40:12 UTC 2019


On Mon, Apr 08, 2019 at 01:24:47PM -0400, Mathieu Desnoyers wrote:
> ----- On Apr 8, 2019, at 11:46 AM, paulmck paulmck at linux.ibm.com wrote:
> 
> > On Mon, Apr 08, 2019 at 10:49:32AM -0400, Mathieu Desnoyers wrote:
> >> ----- On Apr 8, 2019, at 10:22 AM, paulmck paulmck at linux.ibm.com wrote:
> >> 
> >> > On Mon, Apr 08, 2019 at 09:05:34AM -0400, Mathieu Desnoyers wrote:
> >> >> ----- On Apr 7, 2019, at 10:27 PM, paulmck paulmck at linux.ibm.com wrote:
> >> >> 
> >> >> > On Sun, Apr 07, 2019 at 09:07:18PM +0000, Joel Fernandes wrote:
> >> >> >> On Sun, Apr 07, 2019 at 04:41:36PM -0400, Mathieu Desnoyers wrote:
> >> >> >> > 
> >> >> >> > ----- On Apr 7, 2019, at 3:32 PM, Joel Fernandes, Google joel at joelfernandes.org
> >> >> >> > wrote:
> >> >> >> > 
> >> >> >> > > On Sun, Apr 07, 2019 at 03:26:16PM -0400, Mathieu Desnoyers wrote:
> >> >> >> > >> ----- On Apr 7, 2019, at 9:59 AM, paulmck paulmck at linux.ibm.com wrote:
> >> >> >> > >> 
> >> >> >> > >> > On Sun, Apr 07, 2019 at 06:39:41AM -0700, Paul E. McKenney wrote:
> >> >> >> > >> >> On Sat, Apr 06, 2019 at 07:06:13PM -0400, Joel Fernandes wrote:
> >> >> >> > >> > 
> >> >> >> > >> > [ . . . ]
> >> >> >> > >> > 
> >> >> >> > >> >> > > diff --git a/include/asm-generic/vmlinux.lds.h
> >> >> >> > >> >> > > b/include/asm-generic/vmlinux.lds.h
> >> >> >> > >> >> > > index f8f6f04c4453..c2d919a1566e 100644
> >> >> >> > >> >> > > --- a/include/asm-generic/vmlinux.lds.h
> >> >> >> > >> >> > > +++ b/include/asm-generic/vmlinux.lds.h
> >> >> >> > >> >> > > @@ -338,6 +338,10 @@
> >> >> >> > >> >> > >  		KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \
> >> >> >> > >> >> > >  		__stop___tracepoints_ptrs = .;				\
> >> >> >> > >> >> > >  		*(__tracepoints_strings)/* Tracepoints: strings */	\
> >> >> >> > >> >> > > +		. = ALIGN(8);						\
> >> >> >> > >> >> > > +		__start___srcu_struct = .;				\
> >> >> >> > >> >> > > +		*(___srcu_struct_ptrs)					\
> >> >> >> > >> >> > > +		__end___srcu_struct = .;				\
> >> >> >> > >> >> > >  	}								\
> >> >> >> > >> >> > 
> >> >> >> > >> >> > This vmlinux linker modification is not needed. I tested without it and srcu
> >> >> >> > >> >> > torture works fine with rcutorture built as a module. Putting further prints
> >> >> >> > >> >> > in kernel/module.c verified that the kernel is able to find the srcu structs
> >> >> >> > >> >> > just fine. You could squash the below patch into this one or apply it on top
> >> >> >> > >> >> > of the dev branch.
> >> >> >> > >> >> 
> >> >> >> > >> >> Good point, given that otherwise FORTRAN named common blocks would not
> >> >> >> > >> >> work.
> >> >> >> > >> >> 
> >> >> >> > >> >> But isn't one advantage of leaving that stuff in the RO_DATA_SECTION()
> >> >> >> > >> >> macro that it can be mapped read-only?  Or am I suffering from excessive
> >> >> >> > >> >> optimism?
> >> >> >> > >> > 
> >> >> >> > >> > And to answer the other question, in the case where I am suffering from
> >> >> >> > >> > excessive optimism, it should be a separate commit.  Please see below
> >> >> >> > >> > for the updated original commit thus far.
> >> >> >> > >> > 
> >> >> >> > >> > And may I have your Tested-by?
> >> >> >> > >> 
> >> >> >> > >> Just to confirm: does the cleanup performed in the modules going
> >> >> >> > >> notifier end up acting as a barrier first before freeing the memory ?
> >> >> >> > >> If not, is it explicitly stated that a barrier must be issued before
> >> >> >> > >> module unload ?
> >> >> >> > >> 
> >> >> >> > > 
> >> >> >> > > You mean rcu_barrier? It is mentioned in the documentation that this is the
> >> >> >> > > responsibility of the module writer to prevent delays for all modules.
> >> >> >> > 
> >> >> >> > It's a srcu barrier yes. Considering it would be a barrier specific to the
> >> >> >> > srcu domain within that module, I don't see how it would cause delays for
> >> >> >> > "all" modules if we implicitly issue the barrier on module unload. What
> >> >> >> > am I missing ?
> >> >> >> 
> >> >> >> Yes you are right. I thought of this after I just sent my email. I think it
> >> >> >> makes sense for srcu case to do and could avoid a class of bugs.
> >> >> > 
> >> >> > If there are call_srcu() callbacks outstanding, the module writer still
> >> >> > needs the srcu_barrier() because otherwise callbacks arrive after
> >> >> > the module text has gone, which will be disappoint the CPU when it
> >> >> > tries fetching instructions that are no longer mapped.  If there are
> >> >> > no call_srcu() callbacks from that module, then there is no need for
> >> >> > srcu_barrier() either way.
> >> >> > 
> >> >> > So if an srcu_barrier() is needed, the module developer needs to
> >> >> > supply it.
> >> >> 
> >> >> When you say "callbacks arrive after the module text has gone",
> >> >> I think you assume that free_module() is invoked before the
> >> >> MODULE_STATE_GOING notifiers are called. But it's done in the
> >> >> opposite order: going notifiers are called first, and then
> >> >> free_module() is invoked.
> >> >> 
> >> >> So AFAIU it would be safe to issue the srcu_barrier() from the module
> >> >> going notifier.
> >> >> 
> >> >> Or am I missing something ?
> >> > 
> >> > We do seem to be talking past each other.  ;-)
> >> > 
> >> > This has nothing to do with the order of events at module-unload time.
> >> > 
> >> > So please let me try again.
> >> > 
> >> > If a given srcu_struct in a module never has call_srcu() invoked, there
> >> > is no need to invoke rcu_barrier() at any time, whether at module-unload
> >> > time or not.  Adding rcu_barrier() in this case adds overhead and latency
> >> > for no good reason.
> >> 
> >> Not if we invoke srcu_barrier() for that specific domain. If
> >> call_srcu was never invoked for a srcu domain, I don't see why
> >> srcu_barrier() should be more expensive than a simple check that
> >> the domain does not have any srcu work queued.
> > 
> > But that simple check does involve a cache miss for each possible CPU (not
> > just each online CPU), so it is non-trivial, especially on large systems.
> > 
> >> > If a given srcu_struct in a module does have at least one call_srcu()
> >> > invoked, it is already that module's responsibility to make sure that
> >> > the code sticks around long enough for the callback to be invoked.
> >> 
> >> I understand that when users do explicit dynamic allocation/cleanup of
> >> srcu domains, they indeed need to take care of doing explicit srcu_barrier().
> >> However, if they do static definition of srcu domains, it would be nice
> >> if we can handle the barriers under the hood.
> > 
> > All else being equal, of course.  But...
> > 
> >> > This means that correct SRCU users that invoke call_srcu() already
> >> > have srcu_barrier() at module-unload time.  Incorrect SRCU users, with
> >> > reasonable probability, now get a WARN_ON() at module-unload time, with
> >> > the per-CPU state getting leaked.  Before this change, they would (also
> >> > with reasonable probability) instead get an instruction-fetch fault when
> >> > the SRCU callback was invoked after the completion of the module unload.
> >> > Furthermore, in all cases where they would previously have gotten the
> >> > instruction-fetch fault, they now get the WARN_ON(), like this:
> >> > 
> >> >	if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist)))
> >> >		return; /* Forgot srcu_barrier(), so just leak it! */
> >> > 
> >> > So this change already represents an improvement in usability.
> >> 
> >> Considering that we can do a srcu_barrier() for the specific domain,
> >> and that it should add no noticeable overhead if there is no queued
> >> callbacks, I don't see a good reason for leaving the srcu_barrier
> >> invocation to the user rather than implicitly doing it from the
> >> module going notifier.
> > 
> > Now, I could automatically add an indicator of whether or not a
> > call_srcu() had happened, but then again, that would either add a
> > call_srcu() scalability bottleneck or again require a scan of all possible
> > CPUs...  to figure out if it was necessary to scan all possible CPUs.
> > 
> > Or is scanning all possible CPUs down in the noise in this case?  Or
> > am I missing a trick that would reduce the overhead?
> 
> Module unloading implicitly does a synchronize_rcu (for RCU-sched), and
> a stop_machine. So I would be tempted to say that overhead of iteration
> over all CPUs might not matter that much considering the rest.
> 
> About notifying that a call_srcu has happened for the srcu domain in a
> scalable fashion, let's see... We could have a flag "call_srcu_used"
> for each call_srcu domain. Whenever call_srcu is invoked, it would
> load that flag. It sets it on first use.
> 
> The idea here is to only use that flag when srcu_barrier is performed
> right before the srcu domain cleanup (it could become part of that
> cleanup). Else, using it in all srcu_barrier() might be tricky, because
> we may then need to add memory barriers or locking to the call_srcu
> fast-path, which is an overhead we try to avoid.
> 
> However, if we only use that flag as part of the srcu domain cleanup,
> it's already prohibited to invoke call_srcu concurrently with the
> cleanup of the same domain, so I don't think we would need any
> memory barriers in call_srcu.

About the last part of your email, it seems to that if after call_srcu has
returned, if the module could be unloaded on some other CPU - then it would
need to see the flag stored by the preceding call_srcu, so I believe there
would be a memory barrier between the two opreations (call_srcu and module
unload).

Also about doing the unconditional srcu_barrier, since a module could be
unloaded at any time - don't all SRCU using modules need to invoke
srcu_barrier() during their clean up anyway so we are incurring the barrier
overhead anyway? Or, am I missing a design pattern here? It seems to me
rcutorture module definitely calls srcu_barrier() before it is unloaded.

thanks,

 - Joel

> Thoughts ?
> 
> Thanks,
> 
> Mathieu
> 
> -- 
> Mathieu Desnoyers
> EfficiOS Inc.
> http://www.efficios.com


More information about the dri-devel mailing list