[PATCH v2 06/25] drm/mediatek: redefine mtk_ddp_sout_sel

CK Hu ck.hu at mediatek.com
Thu Apr 11 06:09:48 UTC 2019


Hi, Yongqiang:

On Wed, 2019-03-27 at 14:19 +0800, yongqiang.niu at mediatek.com wrote:
> From: Yongqiang Niu <yongqiang.niu at mediatek.com>
> 
> the format of "mtk_ddp_sout_sel"was not flexible, after we add more
> mediatek SOC support, that will be redundant

It looks like this patch is part of patch 'add mmsys private data for
ddp path config', so I would like you squash this patch into that patch.

Regards,
CK

> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 28 ++++++++++++++++++----------
>  1 file changed, 18 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index 80dc91f..e4dafe0 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -391,20 +391,26 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
>  	return value;
>  }
>  
> -static void mtk_ddp_sout_sel(void __iomem *config_regs,
> -			     enum mtk_ddp_comp_id cur,
> -			     enum mtk_ddp_comp_id next)
> +static unsigned int mtk_ddp_sout_sel(enum mtk_ddp_comp_id cur,
> +				     enum mtk_ddp_comp_id next,
> +				     unsigned int *addr)
>  {
> +        unsigned int value;
> +
>  	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
> -		writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
> -			       config_regs + DISP_REG_CONFIG_OUT_SEL);
> +		*addr = DISP_REG_CONFIG_OUT_SEL;
> +                value = BLS_TO_DSI_RDMA1_TO_DPI1;
>  	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> -		writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
> -			       config_regs + DISP_REG_CONFIG_OUT_SEL);
> +		*addr = DISP_REG_CONFIG_OUT_SEL;
> +                value = BLS_TO_DPI_RDMA1_TO_DSI;
>  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
> -		writel_relaxed(DSI_SEL_IN_RDMA,
> -			       config_regs + DISP_REG_CONFIG_DSI_SEL);
> +		*addr = DISP_REG_CONFIG_DSI_SEL;
> +		value = DSI_SEL_IN_RDMA;
> +	} else {
> +		value = 0;
>  	}
> +
> +        return value;
>  }
>  
>  void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
> @@ -419,7 +425,9 @@ void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
>  		writel_relaxed(reg, config_regs + addr);
>  	}
>  
> -	mtk_ddp_sout_sel(config_regs, cur, next);
> +	value = mtk_ddp_sout_sel(cur, next, &addr);
> +	if (value)
> +                writel_relaxed(value, config_regs + addr);
>  
>  	value = mtk_ddp_sel_in(cur, next, &addr);
>  	if (value) {




More information about the dri-devel mailing list