[PATCH v1 0/5] Add supply property for DSI controller

[Alexandre Torgue]

Hi Yannick

On 4/3/19 10:16 AM, Yannick Fertré wrote:
> The DSI controller needs a new property that powers its physical layer.
> Binding has been updated to documented this property.
> Device tree of stm32mp157c soc.
> Move reg18 & reg11 to stm32mp157c device tree file.
> Remove property phy-dsi-supply property to stm32mp157c-dk2.dts file.
> 
> Yannick Fertré (5):

...

>    ARM: dts: stm32: add phy-dsi-supply property on stm32mp157c
>    ARM: dts: stm32: move fixe regulators reg11 & reg18
>    ARM: dts: stm32: remove phy-dsi-supply property on stm32mp157c-dk2
>      board
> 

For ARM part:

Another series is currently under review: "Add support for STM32MP1 
power regulators" (https://lkml.org/lkml/2019/4/8/614).

As soon I'll merge it I'll take your patches without patch
"ARM: dts: stm32: move fixe regulators reg11 & reg18" as it will be no 
longer relevant.

regards
Alexandre


>   .../devicetree/bindings/display/st,stm32-ltdc.txt    |  3 +++
>   arch/arm/boot/dts/stm32mp157c-dk2.dts                |  9 ---------
>   arch/arm/boot/dts/stm32mp157c-ed1.dts                | 16 ----------------
>   arch/arm/boot/dts/stm32mp157c.dtsi                   | 17 +++++++++++++++++
>   drivers/gpu/drm/stm/dw_mipi_dsi-stm.c                | 20 ++++++++++++++++++++
>   5 files changed, 40 insertions(+), 25 deletions(-)
>